FAF deciding on filters on post to be syndicated:

The Evolution of Print – Apply Labeling

Array ( [post_title] => The Evolution of Print – Apply Labeling [post_content] =>

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMerge™

To address some of these issues, ID Technology introduced PowerMerge.

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

Introducing CrossMerge™

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

[post_excerpt] => Print and Apply – Finally as Simple as it Sounds.  Many of our customers are faced with the same demands when it comes to labeling their secondary packaging: more output from packaging lines. higher efficiency and less downtime. best possible barcode quality for GS1 compliance. minimize the total cost of ownership. Traditionally, labels would be […] [post_date_gmt] => 2020-05-18 18:43:21 [post_date] => 2020-05-18 18:43:21 [post_modified_gmt] => 2020-05-18 18:43:21 [post_modified] => 2020-05-18 18:43:21 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5999 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2020/05/the-evolution-of-print-apply-labeling/ [syndication_item_hash] => 0b613e7d5712725abae2867e1f411a8a ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2020/05/yeahlikethat.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/05/yeahlikethat.jpg

Image exists, checking for same file size

Replacing images : - ON

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMerge™

To address some of these issues, ID Technology introduced PowerMerge.

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

Introducing CrossMerge™

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Local save:http://www.labelingnews.com/wp-content/uploads/2020/05/TampApplicator-1.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/05/TampApplicator-1.jpg

Image exists, checking for same file size

Replacing images : - ON

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

The Evolution of Print – Apply Labeling

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMerge™

To address some of these issues, ID Technology introduced PowerMerge.

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

Introducing CrossMerge™

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Local save:https://s.w.org/images/core/emoji/12.0.0-1/72x72/2122.png

Image process :: Saving local image

grab remote location : https://s.w.org/images/core/emoji/12.0.0-1/72x72/2122.png

Image exists, checking for same file size

Replacing images : ™ - ™ ON

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

The Evolution of Print – Apply Labeling

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

The Evolution of Print – Apply Labeling

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMerge™

To address some of these issues, ID Technology introduced PowerMerge.

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

Introducing CrossMerge™

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Local save:http://www.labelingnews.com/wp-content/uploads/2020/05/PowerMergeLN.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/05/PowerMergeLN.jpg

Image exists, checking for same file size

Replacing images : - ON

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

The Evolution of Print – Apply Labeling

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

The Evolution of Print – Apply Labeling

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMergeThe Evolution of Print – Apply Labeling

To address some of these issues, ID Technology introduced PowerMerge.

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

Introducing CrossMergeThe Evolution of Print – Apply Labeling

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Local save:https://s.w.org/images/core/emoji/12.0.0-1/72x72/2122.png

Image process :: Saving local image

grab remote location : https://s.w.org/images/core/emoji/12.0.0-1/72x72/2122.png

Image exists, checking for same file size

Replacing images : ™ - ™ ON

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

The Evolution of Print – Apply Labeling

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

The Evolution of Print – Apply Labeling

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMergeThe Evolution of Print – Apply Labeling

To address some of these issues, ID Technology introduced PowerMerge.

The Evolution of Print – Apply Labeling

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

Introducing CrossMergeThe Evolution of Print – Apply Labeling

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Local save:http://www.labelingnews.com/wp-content/uploads/2020/05/CM-LN.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/05/CM-LN.jpg

Image exists, checking for same file size

Replacing images : - ON

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

The Evolution of Print – Apply Labeling

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

The Evolution of Print – Apply Labeling

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMergeThe Evolution of Print – Apply Labeling

To address some of these issues, ID Technology introduced PowerMerge.

The Evolution of Print – Apply Labeling

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

Introducing CrossMergeThe Evolution of Print – Apply Labeling

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Local save:http://www.labelingnews.com/wp-content/uploads/2020/05/CrossMerge-concept.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/05/CrossMerge-concept.jpg

Image exists, checking for same file size

Replacing images : - ON

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

The Evolution of Print – Apply Labeling

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

The Evolution of Print – Apply Labeling

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMergeThe Evolution of Print – Apply Labeling

To address some of these issues, ID Technology introduced PowerMerge.

The Evolution of Print – Apply Labeling

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

Introducing CrossMergeThe Evolution of Print – Apply Labeling

CrossMerge brings our PowerMerge concept to another level.

The Evolution of Print – Apply Labeling

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2020/05/the-evolution-of-print-apply-labeling/ [syndication_item_hash] => 0b613e7d5712725abae2867e1f411a8a )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :The Evolution of Print – Apply Labeling

Array ( [post_title] => The Evolution of Print – Apply Labeling [post_content] =>

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

The Evolution of Print – Apply Labeling

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

The Evolution of Print – Apply Labeling

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMergeThe Evolution of Print – Apply Labeling

To address some of these issues, ID Technology introduced PowerMerge.

The Evolution of Print – Apply Labeling

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

Introducing CrossMergeThe Evolution of Print – Apply Labeling

CrossMerge brings our PowerMerge concept to another level.

The Evolution of Print – Apply Labeling

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

The Evolution of Print – Apply Labeling

For our customers, there are some huge advantages of CrossMerge.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

[post_excerpt] => Print and Apply – Finally as Simple as it Sounds.  Many of our customers are faced with the same demands when it comes to labeling their secondary packaging: more output from packaging lines. higher efficiency and less downtime. best possible barcode quality for GS1 compliance. minimize the total cost of ownership. Traditionally, labels would be […] [post_date_gmt] => 2020-05-18 18:43:21 [post_date] => 2020-05-18 18:43:21 [post_modified_gmt] => 2020-05-18 18:43:21 [post_modified] => 2020-05-18 18:43:21 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5999 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2020/05/the-evolution-of-print-apply-labeling/ [syndication_item_hash] => 0b613e7d5712725abae2867e1f411a8a [faf_featured_image] => 0 [faf_process_image] => 0,0,0,0,0,0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

The Art of Barcode Shaving

Array ( [post_title] => The Art of Barcode Shaving [post_content] =>

Okay, I’m not suggesting that your barcodes are looking a little scraggly and in need of getting their chins cleaned up. Barcode shaving (also often referred to as pixel shaving) is a way of tweaking your barcodes to get the best, verified print quality.

In this article I want to dig a little into this process and how it relates to printing two-dimensional barcodes when using inkjet printers.

When producing 2D barcodes such as DataMatrix or QR code to GS1 standards, it is obviously important that the data is correct, the structure of the encoded data is correct and the quality of the printed code meets the quality standard.

Typical GS1 DataMatrix Code

Getting the data correct is really the job of the organization that’s printing the barcode, after all, it is their data.

The structure of a GS1 barcode is defined in the GS1 general specification. It’s relatively easy to check that the structure of the data is correct in some cases using a simple smartphone application – I’ve discussed this several times elsewhere.

In the GS1 system, quality for 2D barcodes, such as data matrix and QR codes, is defined in the ISO/IEC 15416 standard.

To verify the quality of a barcode against the standard, a number of measurements are taken using a calibrated verifier. All of these measurements each produce an individual grade which is then combined into one single overall score.

One of these parameters is called print growth. This measures the size of the elements in the barcode and ensures they haven’t crept above the size they should be.

With a 2D DataMatrix barcode, as an example, each of the little squares that makes up the symbol should be exactly the same size, both the dark and light squares.

Look at these two examples:

One of them looks to be printed nice and darkly you – would think that it will be easy for a scanner to read and that its verification score will be good.

In the other example, the barcode looks somewhat lighter. Intuition tells us, that this one would be more difficult to read in the dark version and possibly would score less high in the verification

As it happens, both barcodes are easy to read with most barcode scanners – I can read them just fine with the Barcode Check app on my phone.

However, if you look more closely at the darker example, you’ll see that the darker squares are somewhat larger than the white ones – this is print growth.

What is Print Growth?

When printing with an inkjet printer, the image is produced of a number of very small individual drops of ink. The examples I’ve used were printed on our ClearMark Thermal Inkjet printer, set at 300 dots per inch in both the horizontal and vertical axis. Since the barcode is 0.5″ square, each size is 150 drops or pixels and the individual small squares that make up the barcode are 7 x 7 pixels.

As the drops of ink are sprayed onto the product, they dry quickly (assuming the ink is compatible with the substrate), but not instantly. There is often some time for the drops to spread a little before they set permanently, causing the elements on the image to be slightly larger than intended.

This is why when inspecting a DataMatrix or QR Code that has been printed using inkjet, the small squares that are printed are often too large as the ink spreads.

This is print growth – you can see in the darker example, that the black squares are infringing on the white ones – causing the white squares to be smaller, or even rectangular, rather than squares.

Print growth will downgrade the ISO score of your barcode – possibly to the extent that it fails verification.

So What’s The Solution?

In these situations, Barcode (or Pixel) Shaving is your friend.

With each of the small squares in my example barcode, our ID Technology and Code Tech TIJ printers (and our Greydon Genesis inkjet printers), allow pixels to be removed (shaved) from around each square. So I could make the elements of my barcode 6 x 6 pixels (instead of 7 x 7), but still centered in the same location. This allows the ink to spread a little in each barcode element, but still stay within its assigned overall area.

Using barcode shaving on our printers allows them to be fine-tuned to ensure the best verification scores for both DataMatrix and QR Codes. This is huge for customers who need to comply with GS1 standards, such as those in the medical of pharma industries.

 

Is it easy to set up?

Yes, this is easy to use on both our Code Tech and ClearMark printers.

Here is the setting screen on ClearMark. You simply set the amount of shaving as a percentage. There is a little trial and error involved, but the setting is saved with the message to remember for next time.

 

So Shaving is Good?

Yes – this feature can be the difference between passing or failing barcode verification. It is often well worth the time to spend a few minutes fine-tuning your barcode settings, to avoid potential problems in the future.

Want to Learn More?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

[post_excerpt] => Okay, I’m not suggesting that your barcodes are looking a little scraggly and in need of getting their chins cleaned up. Barcode shaving (also often referred to as pixel shaving) is a way of tweaking your barcodes to get the best, verified print quality. In this article I want to dig a little into this […] [post_date_gmt] => 2020-04-29 12:18:50 [post_date] => 2020-04-29 12:18:50 [post_modified_gmt] => 2020-04-29 12:18:50 [post_modified] => 2020-04-29 12:18:50 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5993 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2020/04/barcodeshaving/ [syndication_item_hash] => 3a60546a1fbe14161f7a85f9efbc7ab5 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2020/04/barcode-shaving-300x300.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/04/barcode-shaving-300x300.jpg

Image exists, checking for same file size

Replacing images : - ON

Okay, I’m not suggesting that your barcodes are looking a little scraggly and in need of getting their chins cleaned up. Barcode shaving (also often referred to as pixel shaving) is a way of tweaking your barcodes to get the best, verified print quality.

In this article I want to dig a little into this process and how it relates to printing two-dimensional barcodes when using inkjet printers.

When producing 2D barcodes such as DataMatrix or QR code to GS1 standards, it is obviously important that the data is correct, the structure of the encoded data is correct and the quality of the printed code meets the quality standard.

Typical GS1 DataMatrix Code

Getting the data correct is really the job of the organization that’s printing the barcode, after all, it is their data.

The structure of a GS1 barcode is defined in the GS1 general specification. It’s relatively easy to check that the structure of the data is correct in some cases using a simple smartphone application – I’ve discussed this several times elsewhere.

In the GS1 system, quality for 2D barcodes, such as data matrix and QR codes, is defined in the ISO/IEC 15416 standard.

To verify the quality of a barcode against the standard, a number of measurements are taken using a calibrated verifier. All of these measurements each produce an individual grade which is then combined into one single overall score.

One of these parameters is called print growth. This measures the size of the elements in the barcode and ensures they haven’t crept above the size they should be.

With a 2D DataMatrix barcode, as an example, each of the little squares that makes up the symbol should be exactly the same size, both the dark and light squares.

Look at these two examples:

One of them looks to be printed nice and darkly you – would think that it will be easy for a scanner to read and that its verification score will be good.

In the other example, the barcode looks somewhat lighter. Intuition tells us, that this one would be more difficult to read in the dark version and possibly would score less high in the verification

As it happens, both barcodes are easy to read with most barcode scanners – I can read them just fine with the Barcode Check app on my phone.

However, if you look more closely at the darker example, you’ll see that the darker squares are somewhat larger than the white ones – this is print growth.

What is Print Growth?

When printing with an inkjet printer, the image is produced of a number of very small individual drops of ink. The examples I’ve used were printed on our ClearMark Thermal Inkjet printer, set at 300 dots per inch in both the horizontal and vertical axis. Since the barcode is 0.5″ square, each size is 150 drops or pixels and the individual small squares that make up the barcode are 7 x 7 pixels.

As the drops of ink are sprayed onto the product, they dry quickly (assuming the ink is compatible with the substrate), but not instantly. There is often some time for the drops to spread a little before they set permanently, causing the elements on the image to be slightly larger than intended.

This is why when inspecting a DataMatrix or QR Code that has been printed using inkjet, the small squares that are printed are often too large as the ink spreads.

This is print growth – you can see in the darker example, that the black squares are infringing on the white ones – causing the white squares to be smaller, or even rectangular, rather than squares.

Print growth will downgrade the ISO score of your barcode – possibly to the extent that it fails verification.

So What’s The Solution?

In these situations, Barcode (or Pixel) Shaving is your friend.

With each of the small squares in my example barcode, our ID Technology and Code Tech TIJ printers (and our Greydon Genesis inkjet printers), allow pixels to be removed (shaved) from around each square. So I could make the elements of my barcode 6 x 6 pixels (instead of 7 x 7), but still centered in the same location. This allows the ink to spread a little in each barcode element, but still stay within its assigned overall area.

Using barcode shaving on our printers allows them to be fine-tuned to ensure the best verification scores for both DataMatrix and QR Codes. This is huge for customers who need to comply with GS1 standards, such as those in the medical of pharma industries.

 

Is it easy to set up?

Yes, this is easy to use on both our Code Tech and ClearMark printers.

Here is the setting screen on ClearMark. You simply set the amount of shaving as a percentage. There is a little trial and error involved, but the setting is saved with the message to remember for next time.

 

So Shaving is Good?

Yes – this feature can be the difference between passing or failing barcode verification. It is often well worth the time to spend a few minutes fine-tuning your barcode settings, to avoid potential problems in the future.

Want to Learn More?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

Local save:http://www.labelingnews.com/wp-content/uploads/2020/04/Typical-GS1.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/04/Typical-GS1.jpg

Image exists, checking for same file size

Replacing images : - ON

The Art of Barcode ShavingOkay, I’m not suggesting that your barcodes are looking a little scraggly and in need of getting their chins cleaned up. Barcode shaving (also often referred to as pixel shaving) is a way of tweaking your barcodes to get the best, verified print quality.

In this article I want to dig a little into this process and how it relates to printing two-dimensional barcodes when using inkjet printers.

When producing 2D barcodes such as DataMatrix or QR code to GS1 standards, it is obviously important that the data is correct, the structure of the encoded data is correct and the quality of the printed code meets the quality standard.

Typical GS1 DataMatrix Code

Getting the data correct is really the job of the organization that’s printing the barcode, after all, it is their data.

The structure of a GS1 barcode is defined in the GS1 general specification. It’s relatively easy to check that the structure of the data is correct in some cases using a simple smartphone application – I’ve discussed this several times elsewhere.

In the GS1 system, quality for 2D barcodes, such as data matrix and QR codes, is defined in the ISO/IEC 15416 standard.

To verify the quality of a barcode against the standard, a number of measurements are taken using a calibrated verifier. All of these measurements each produce an individual grade which is then combined into one single overall score.

One of these parameters is called print growth. This measures the size of the elements in the barcode and ensures they haven’t crept above the size they should be.

With a 2D DataMatrix barcode, as an example, each of the little squares that makes up the symbol should be exactly the same size, both the dark and light squares.

Look at these two examples:

One of them looks to be printed nice and darkly you – would think that it will be easy for a scanner to read and that its verification score will be good.

In the other example, the barcode looks somewhat lighter. Intuition tells us, that this one would be more difficult to read in the dark version and possibly would score less high in the verification

As it happens, both barcodes are easy to read with most barcode scanners – I can read them just fine with the Barcode Check app on my phone.

However, if you look more closely at the darker example, you’ll see that the darker squares are somewhat larger than the white ones – this is print growth.

What is Print Growth?

When printing with an inkjet printer, the image is produced of a number of very small individual drops of ink. The examples I’ve used were printed on our ClearMark Thermal Inkjet printer, set at 300 dots per inch in both the horizontal and vertical axis. Since the barcode is 0.5″ square, each size is 150 drops or pixels and the individual small squares that make up the barcode are 7 x 7 pixels.

As the drops of ink are sprayed onto the product, they dry quickly (assuming the ink is compatible with the substrate), but not instantly. There is often some time for the drops to spread a little before they set permanently, causing the elements on the image to be slightly larger than intended.

This is why when inspecting a DataMatrix or QR Code that has been printed using inkjet, the small squares that are printed are often too large as the ink spreads.

This is print growth – you can see in the darker example, that the black squares are infringing on the white ones – causing the white squares to be smaller, or even rectangular, rather than squares.

Print growth will downgrade the ISO score of your barcode – possibly to the extent that it fails verification.

So What’s The Solution?

In these situations, Barcode (or Pixel) Shaving is your friend.

With each of the small squares in my example barcode, our ID Technology and Code Tech TIJ printers (and our Greydon Genesis inkjet printers), allow pixels to be removed (shaved) from around each square. So I could make the elements of my barcode 6 x 6 pixels (instead of 7 x 7), but still centered in the same location. This allows the ink to spread a little in each barcode element, but still stay within its assigned overall area.

Using barcode shaving on our printers allows them to be fine-tuned to ensure the best verification scores for both DataMatrix and QR Codes. This is huge for customers who need to comply with GS1 standards, such as those in the medical of pharma industries.

 

Is it easy to set up?

Yes, this is easy to use on both our Code Tech and ClearMark printers.

Here is the setting screen on ClearMark. You simply set the amount of shaving as a percentage. There is a little trial and error involved, but the setting is saved with the message to remember for next time.

 

So Shaving is Good?

Yes – this feature can be the difference between passing or failing barcode verification. It is often well worth the time to spend a few minutes fine-tuning your barcode settings, to avoid potential problems in the future.

Want to Learn More?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

Local save:http://www.labelingnews.com/wp-content/uploads/2020/04/WhichBarcode.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/04/WhichBarcode.jpg

Image exists, checking for same file size

Replacing images : - ON

The Art of Barcode ShavingOkay, I’m not suggesting that your barcodes are looking a little scraggly and in need of getting their chins cleaned up. Barcode shaving (also often referred to as pixel shaving) is a way of tweaking your barcodes to get the best, verified print quality.

In this article I want to dig a little into this process and how it relates to printing two-dimensional barcodes when using inkjet printers.

When producing 2D barcodes such as DataMatrix or QR code to GS1 standards, it is obviously important that the data is correct, the structure of the encoded data is correct and the quality of the printed code meets the quality standard.

The Art of Barcode Shaving

Typical GS1 DataMatrix Code

Getting the data correct is really the job of the organization that’s printing the barcode, after all, it is their data.

The structure of a GS1 barcode is defined in the GS1 general specification. It’s relatively easy to check that the structure of the data is correct in some cases using a simple smartphone application – I’ve discussed this several times elsewhere.

In the GS1 system, quality for 2D barcodes, such as data matrix and QR codes, is defined in the ISO/IEC 15416 standard.

To verify the quality of a barcode against the standard, a number of measurements are taken using a calibrated verifier. All of these measurements each produce an individual grade which is then combined into one single overall score.

One of these parameters is called print growth. This measures the size of the elements in the barcode and ensures they haven’t crept above the size they should be.

With a 2D DataMatrix barcode, as an example, each of the little squares that makes up the symbol should be exactly the same size, both the dark and light squares.

Look at these two examples:

One of them looks to be printed nice and darkly you – would think that it will be easy for a scanner to read and that its verification score will be good.

In the other example, the barcode looks somewhat lighter. Intuition tells us, that this one would be more difficult to read in the dark version and possibly would score less high in the verification

As it happens, both barcodes are easy to read with most barcode scanners – I can read them just fine with the Barcode Check app on my phone.

However, if you look more closely at the darker example, you’ll see that the darker squares are somewhat larger than the white ones – this is print growth.

What is Print Growth?

When printing with an inkjet printer, the image is produced of a number of very small individual drops of ink. The examples I’ve used were printed on our ClearMark Thermal Inkjet printer, set at 300 dots per inch in both the horizontal and vertical axis. Since the barcode is 0.5″ square, each size is 150 drops or pixels and the individual small squares that make up the barcode are 7 x 7 pixels.

As the drops of ink are sprayed onto the product, they dry quickly (assuming the ink is compatible with the substrate), but not instantly. There is often some time for the drops to spread a little before they set permanently, causing the elements on the image to be slightly larger than intended.

This is why when inspecting a DataMatrix or QR Code that has been printed using inkjet, the small squares that are printed are often too large as the ink spreads.

This is print growth – you can see in the darker example, that the black squares are infringing on the white ones – causing the white squares to be smaller, or even rectangular, rather than squares.

Print growth will downgrade the ISO score of your barcode – possibly to the extent that it fails verification.

So What’s The Solution?

In these situations, Barcode (or Pixel) Shaving is your friend.

With each of the small squares in my example barcode, our ID Technology and Code Tech TIJ printers (and our Greydon Genesis inkjet printers), allow pixels to be removed (shaved) from around each square. So I could make the elements of my barcode 6 x 6 pixels (instead of 7 x 7), but still centered in the same location. This allows the ink to spread a little in each barcode element, but still stay within its assigned overall area.

Using barcode shaving on our printers allows them to be fine-tuned to ensure the best verification scores for both DataMatrix and QR Codes. This is huge for customers who need to comply with GS1 standards, such as those in the medical of pharma industries.

 

Is it easy to set up?

Yes, this is easy to use on both our Code Tech and ClearMark printers.

Here is the setting screen on ClearMark. You simply set the amount of shaving as a percentage. There is a little trial and error involved, but the setting is saved with the message to remember for next time.

 

So Shaving is Good?

Yes – this feature can be the difference between passing or failing barcode verification. It is often well worth the time to spend a few minutes fine-tuning your barcode settings, to avoid potential problems in the future.

Want to Learn More?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

Local save:http://www.labelingnews.com/wp-content/uploads/2020/04/clearmark-shaving.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/04/clearmark-shaving.jpg

Image exists, checking for same file size

Replacing images : - ON

The Art of Barcode ShavingOkay, I’m not suggesting that your barcodes are looking a little scraggly and in need of getting their chins cleaned up. Barcode shaving (also often referred to as pixel shaving) is a way of tweaking your barcodes to get the best, verified print quality.

In this article I want to dig a little into this process and how it relates to printing two-dimensional barcodes when using inkjet printers.

When producing 2D barcodes such as DataMatrix or QR code to GS1 standards, it is obviously important that the data is correct, the structure of the encoded data is correct and the quality of the printed code meets the quality standard.

The Art of Barcode Shaving

Typical GS1 DataMatrix Code

Getting the data correct is really the job of the organization that’s printing the barcode, after all, it is their data.

The structure of a GS1 barcode is defined in the GS1 general specification. It’s relatively easy to check that the structure of the data is correct in some cases using a simple smartphone application – I’ve discussed this several times elsewhere.

In the GS1 system, quality for 2D barcodes, such as data matrix and QR codes, is defined in the ISO/IEC 15416 standard.

To verify the quality of a barcode against the standard, a number of measurements are taken using a calibrated verifier. All of these measurements each produce an individual grade which is then combined into one single overall score.

One of these parameters is called print growth. This measures the size of the elements in the barcode and ensures they haven’t crept above the size they should be.

With a 2D DataMatrix barcode, as an example, each of the little squares that makes up the symbol should be exactly the same size, both the dark and light squares.

Look at these two examples:

The Art of Barcode Shaving

One of them looks to be printed nice and darkly you – would think that it will be easy for a scanner to read and that its verification score will be good.

In the other example, the barcode looks somewhat lighter. Intuition tells us, that this one would be more difficult to read in the dark version and possibly would score less high in the verification

As it happens, both barcodes are easy to read with most barcode scanners – I can read them just fine with the Barcode Check app on my phone.

However, if you look more closely at the darker example, you’ll see that the darker squares are somewhat larger than the white ones – this is print growth.

What is Print Growth?

When printing with an inkjet printer, the image is produced of a number of very small individual drops of ink. The examples I’ve used were printed on our ClearMark Thermal Inkjet printer, set at 300 dots per inch in both the horizontal and vertical axis. Since the barcode is 0.5″ square, each size is 150 drops or pixels and the individual small squares that make up the barcode are 7 x 7 pixels.

As the drops of ink are sprayed onto the product, they dry quickly (assuming the ink is compatible with the substrate), but not instantly. There is often some time for the drops to spread a little before they set permanently, causing the elements on the image to be slightly larger than intended.

This is why when inspecting a DataMatrix or QR Code that has been printed using inkjet, the small squares that are printed are often too large as the ink spreads.

This is print growth – you can see in the darker example, that the black squares are infringing on the white ones – causing the white squares to be smaller, or even rectangular, rather than squares.

Print growth will downgrade the ISO score of your barcode – possibly to the extent that it fails verification.

So What’s The Solution?

In these situations, Barcode (or Pixel) Shaving is your friend.

With each of the small squares in my example barcode, our ID Technology and Code Tech TIJ printers (and our Greydon Genesis inkjet printers), allow pixels to be removed (shaved) from around each square. So I could make the elements of my barcode 6 x 6 pixels (instead of 7 x 7), but still centered in the same location. This allows the ink to spread a little in each barcode element, but still stay within its assigned overall area.

Using barcode shaving on our printers allows them to be fine-tuned to ensure the best verification scores for both DataMatrix and QR Codes. This is huge for customers who need to comply with GS1 standards, such as those in the medical of pharma industries.

 

Is it easy to set up?

Yes, this is easy to use on both our Code Tech and ClearMark printers.

Here is the setting screen on ClearMark. You simply set the amount of shaving as a percentage. There is a little trial and error involved, but the setting is saved with the message to remember for next time.

 

So Shaving is Good?

Yes – this feature can be the difference between passing or failing barcode verification. It is often well worth the time to spend a few minutes fine-tuning your barcode settings, to avoid potential problems in the future.

Want to Learn More?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2020/04/barcodeshaving/ [syndication_item_hash] => 3a60546a1fbe14161f7a85f9efbc7ab5 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :The Art of Barcode Shaving

Array ( [post_title] => The Art of Barcode Shaving [post_content] =>

The Art of Barcode ShavingOkay, I’m not suggesting that your barcodes are looking a little scraggly and in need of getting their chins cleaned up. Barcode shaving (also often referred to as pixel shaving) is a way of tweaking your barcodes to get the best, verified print quality.

In this article I want to dig a little into this process and how it relates to printing two-dimensional barcodes when using inkjet printers.

When producing 2D barcodes such as DataMatrix or QR code to GS1 standards, it is obviously important that the data is correct, the structure of the encoded data is correct and the quality of the printed code meets the quality standard.

The Art of Barcode Shaving

Typical GS1 DataMatrix Code

Getting the data correct is really the job of the organization that’s printing the barcode, after all, it is their data.

The structure of a GS1 barcode is defined in the GS1 general specification. It’s relatively easy to check that the structure of the data is correct in some cases using a simple smartphone application – I’ve discussed this several times elsewhere.

In the GS1 system, quality for 2D barcodes, such as data matrix and QR codes, is defined in the ISO/IEC 15416 standard.

To verify the quality of a barcode against the standard, a number of measurements are taken using a calibrated verifier. All of these measurements each produce an individual grade which is then combined into one single overall score.

One of these parameters is called print growth. This measures the size of the elements in the barcode and ensures they haven’t crept above the size they should be.

With a 2D DataMatrix barcode, as an example, each of the little squares that makes up the symbol should be exactly the same size, both the dark and light squares.

Look at these two examples:

The Art of Barcode Shaving

One of them looks to be printed nice and darkly you – would think that it will be easy for a scanner to read and that its verification score will be good.

In the other example, the barcode looks somewhat lighter. Intuition tells us, that this one would be more difficult to read in the dark version and possibly would score less high in the verification

As it happens, both barcodes are easy to read with most barcode scanners – I can read them just fine with the Barcode Check app on my phone.

However, if you look more closely at the darker example, you’ll see that the darker squares are somewhat larger than the white ones – this is print growth.

What is Print Growth?

When printing with an inkjet printer, the image is produced of a number of very small individual drops of ink. The examples I’ve used were printed on our ClearMark Thermal Inkjet printer, set at 300 dots per inch in both the horizontal and vertical axis. Since the barcode is 0.5″ square, each size is 150 drops or pixels and the individual small squares that make up the barcode are 7 x 7 pixels.

As the drops of ink are sprayed onto the product, they dry quickly (assuming the ink is compatible with the substrate), but not instantly. There is often some time for the drops to spread a little before they set permanently, causing the elements on the image to be slightly larger than intended.

This is why when inspecting a DataMatrix or QR Code that has been printed using inkjet, the small squares that are printed are often too large as the ink spreads.

This is print growth – you can see in the darker example, that the black squares are infringing on the white ones – causing the white squares to be smaller, or even rectangular, rather than squares.

Print growth will downgrade the ISO score of your barcode – possibly to the extent that it fails verification.

So What’s The Solution?

In these situations, Barcode (or Pixel) Shaving is your friend.

With each of the small squares in my example barcode, our ID Technology and Code Tech TIJ printers (and our Greydon Genesis inkjet printers), allow pixels to be removed (shaved) from around each square. So I could make the elements of my barcode 6 x 6 pixels (instead of 7 x 7), but still centered in the same location. This allows the ink to spread a little in each barcode element, but still stay within its assigned overall area.

Using barcode shaving on our printers allows them to be fine-tuned to ensure the best verification scores for both DataMatrix and QR Codes. This is huge for customers who need to comply with GS1 standards, such as those in the medical of pharma industries.

 

Is it easy to set up?

Yes, this is easy to use on both our Code Tech and ClearMark printers.

The Art of Barcode Shaving

Here is the setting screen on ClearMark. You simply set the amount of shaving as a percentage. There is a little trial and error involved, but the setting is saved with the message to remember for next time.

 

So Shaving is Good?

Yes – this feature can be the difference between passing or failing barcode verification. It is often well worth the time to spend a few minutes fine-tuning your barcode settings, to avoid potential problems in the future.

Want to Learn More?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

[post_excerpt] => Okay, I’m not suggesting that your barcodes are looking a little scraggly and in need of getting their chins cleaned up. Barcode shaving (also often referred to as pixel shaving) is a way of tweaking your barcodes to get the best, verified print quality. In this article I want to dig a little into this […] [post_date_gmt] => 2020-04-29 12:18:50 [post_date] => 2020-04-29 12:18:50 [post_modified_gmt] => 2020-04-29 12:18:50 [post_modified] => 2020-04-29 12:18:50 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5993 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2020/04/barcodeshaving/ [syndication_item_hash] => 3a60546a1fbe14161f7a85f9efbc7ab5 [faf_featured_image] => 0 [faf_process_image] => 0,0,0,0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Manage Your New Nutrition Labels

Array ( [post_title] => Manage Your New Nutrition Labels [post_content] =>

The new style, FDA approved, nutritional facts labels take effect next month.

The agency has stated that due to many companies int the food industry not being ready, enforcement will be delayed for six months, but this is still a good time to ensure you have a plan to be in compliance.

One of the reasons stated for the delay is that many food producers have a large number of existing printed labels in stock that need to be used up, and many have not finished the process of procuring labels to the new design.

One way to help with this problem (and to make managing many SKUs of nutrition labels much easier) is to invest in ID Technology’s labeling system, with optional print/apply head to print the nutrition information right on the label applicator at the time of use.

The 262 print/apply labeling head can be used as the bottom head on a top/bottom labeler or as a bottom only labeler in order to produce the completed printed nutrition label.

On a top/bottom set-up, this allows for the existing nicely printed digital or flexo label to be applied to the top of the package and the complete bottom label with allergen, ingredients and nutritional information be printed on the bottom label.

We recommend using NiceLabel label management to provide full control of the label designs and ensure that only the correct, approved label is printed every time.

Using this system can eliminate the need to source and manage multiple pre-printed label SKUs and prevent being left with inventories of obsolete labels when the copy on the label changes.

In addition, the 262 labeling head can also apply conventional printed labels, allowing our customers to use pre-printed labels for large volume products and the print/apply feature for smaller runs.

Our labeling systems are built in the USA and are designed to be easy to set-up, use and maintain.

How can ID Technology help you meet your objectives for your labeling operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

[post_excerpt] => The new style, FDA approved, nutritional facts labels take effect next month. The agency has stated that due to many companies int the food industry not being ready, enforcement will be delayed for six months, but this is still a good time to ensure you have a plan to be in compliance. One of the […] [post_date_gmt] => 2019-12-11 22:40:15 [post_date] => 2019-12-11 22:40:15 [post_modified_gmt] => 2019-12-11 22:40:15 [post_modified] => 2019-12-11 22:40:15 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5974 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/12/manage-your-new-nutrition-labels/ [syndication_item_hash] => 703d705730d88ef43b42eccf58528973 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2019/12/digitalize-labeling-262b.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/12/digitalize-labeling-262b.jpg

Image exists, checking for same file size

Replacing images : - ON

The new style, FDA approved, nutritional facts labels take effect next month.

The agency has stated that due to many companies int the food industry not being ready, enforcement will be delayed for six months, but this is still a good time to ensure you have a plan to be in compliance.

One of the reasons stated for the delay is that many food producers have a large number of existing printed labels in stock that need to be used up, and many have not finished the process of procuring labels to the new design.

One way to help with this problem (and to make managing many SKUs of nutrition labels much easier) is to invest in ID Technology’s labeling system, with optional print/apply head to print the nutrition information right on the label applicator at the time of use.

The 262 print/apply labeling head can be used as the bottom head on a top/bottom labeler or as a bottom only labeler in order to produce the completed printed nutrition label.

On a top/bottom set-up, this allows for the existing nicely printed digital or flexo label to be applied to the top of the package and the complete bottom label with allergen, ingredients and nutritional information be printed on the bottom label.

We recommend using NiceLabel label management to provide full control of the label designs and ensure that only the correct, approved label is printed every time.

Using this system can eliminate the need to source and manage multiple pre-printed label SKUs and prevent being left with inventories of obsolete labels when the copy on the label changes.

In addition, the 262 labeling head can also apply conventional printed labels, allowing our customers to use pre-printed labels for large volume products and the print/apply feature for smaller runs.

Our labeling systems are built in the USA and are designed to be easy to set-up, use and maintain.

How can ID Technology help you meet your objectives for your labeling operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/12/manage-your-new-nutrition-labels/ [syndication_item_hash] => 703d705730d88ef43b42eccf58528973 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Manage Your New Nutrition Labels

Array ( [post_title] => Manage Your New Nutrition Labels [post_content] =>

The new style, FDA approved, nutritional facts labels take effect next month.

The agency has stated that due to many companies int the food industry not being ready, enforcement will be delayed for six months, but this is still a good time to ensure you have a plan to be in compliance.

One of the reasons stated for the delay is that many food producers have a large number of existing printed labels in stock that need to be used up, and many have not finished the process of procuring labels to the new design.

One way to help with this problem (and to make managing many SKUs of nutrition labels much easier) is to invest in ID Technology’s labeling system, with optional print/apply head to print the nutrition information right on the label applicator at the time of use.

Manage Your New Nutrition Labels

The 262 print/apply labeling head can be used as the bottom head on a top/bottom labeler or as a bottom only labeler in order to produce the completed printed nutrition label.

On a top/bottom set-up, this allows for the existing nicely printed digital or flexo label to be applied to the top of the package and the complete bottom label with allergen, ingredients and nutritional information be printed on the bottom label.

We recommend using NiceLabel label management to provide full control of the label designs and ensure that only the correct, approved label is printed every time.

Using this system can eliminate the need to source and manage multiple pre-printed label SKUs and prevent being left with inventories of obsolete labels when the copy on the label changes.

In addition, the 262 labeling head can also apply conventional printed labels, allowing our customers to use pre-printed labels for large volume products and the print/apply feature for smaller runs.

Our labeling systems are built in the USA and are designed to be easy to set-up, use and maintain.

How can ID Technology help you meet your objectives for your labeling operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

[post_excerpt] => The new style, FDA approved, nutritional facts labels take effect next month. The agency has stated that due to many companies int the food industry not being ready, enforcement will be delayed for six months, but this is still a good time to ensure you have a plan to be in compliance. One of the […] [post_date_gmt] => 2019-12-11 22:40:15 [post_date] => 2019-12-11 22:40:15 [post_modified_gmt] => 2019-12-11 22:40:15 [post_modified] => 2019-12-11 22:40:15 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5974 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/12/manage-your-new-nutrition-labels/ [syndication_item_hash] => 703d705730d88ef43b42eccf58528973 [faf_featured_image] => 0 [faf_process_image] => 0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Canadian Printing Awards – Congratulations Jet Label!

Array ( [post_title] => Canadian Printing Awards – Congratulations Jet Label! [post_content] =>

The Canadian Printing Awards is an annual event, currently in its 14th year, that celebrates the excellence and innovation of the printing industry in Canada.

The awards cover a wide range of print and printing-related categories, Industry Achievement, Print Design, Printing, Technology and Environmental.

The 2019 awards were presented at a gala event in Toronto and a total of 113 gold, silver and bronze awards were presented.

We are thrilled that the newest member of our ProMach Labeling & Coding family, Jet Label swept the awards in the Digital Label category, winning gold, silver and bronze.

 

This is a fantastic achievement and all three Jet Label submissions would have been worthy of first place. Here is the gold award and the winning label, printed for Dog Island Brewing:

To show just how consistent the Jet Label quality is, this isn’t the first time our colleagues have dominated the Digital Label category at the awards. Here are the gold, silver and bronze winners from 2018 – see a trend here?

Jet Label is Western Canada’s largest supplier of high-quality labels (both digital and flexo) with large investments in equipment and a super team of motivated professionals. A great addition to the ProMach family.

With 7 label converting and printing plants across the United States and Canada, ProMach is your local label company with national reach and support. Combining our labels with ID Technology and EPI labeling equipment is the best way to ensure your products project the right image.

Want to get started improving your labels and labeling? Contact us today at 888-438-3242 Option#3. You can also email me at david.holliday@promachbuilt.com. We’ll be sure to get you in touch with an expert, right in your area!

[post_excerpt] => The Canadian Printing Awards is an annual event, currently in its 14th year, that celebrates the excellence and innovation of the printing industry in Canada. The awards cover a wide range of print and printing-related categories, Industry Achievement, Print Design, Printing, Technology and Environmental. The 2019 awards were presented at a gala event in Toronto […] [post_date_gmt] => 2019-11-08 22:12:39 [post_date] => 2019-11-08 22:12:39 [post_modified_gmt] => 2019-11-08 22:12:39 [post_modified] => 2019-11-08 22:12:39 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5966 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/11/canadian-printing-awards-congratulations-jet-label/ [syndication_item_hash] => 688fde332c4ebb0e26d74b655a18f93e ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2019/11/2019printawards.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/11/2019printawards.jpg

Image exists, checking for same file size

Replacing images : - ON

The Canadian Printing Awards is an annual event, currently in its 14th year, that celebrates the excellence and innovation of the printing industry in Canada.

The awards cover a wide range of print and printing-related categories, Industry Achievement, Print Design, Printing, Technology and Environmental.

The 2019 awards were presented at a gala event in Toronto and a total of 113 gold, silver and bronze awards were presented.

We are thrilled that the newest member of our ProMach Labeling & Coding family, Jet Label swept the awards in the Digital Label category, winning gold, silver and bronze.

 

This is a fantastic achievement and all three Jet Label submissions would have been worthy of first place. Here is the gold award and the winning label, printed for Dog Island Brewing:

To show just how consistent the Jet Label quality is, this isn’t the first time our colleagues have dominated the Digital Label category at the awards. Here are the gold, silver and bronze winners from 2018 – see a trend here?

Jet Label is Western Canada’s largest supplier of high-quality labels (both digital and flexo) with large investments in equipment and a super team of motivated professionals. A great addition to the ProMach family.

With 7 label converting and printing plants across the United States and Canada, ProMach is your local label company with national reach and support. Combining our labels with ID Technology and EPI labeling equipment is the best way to ensure your products project the right image.

Want to get started improving your labels and labeling? Contact us today at 888-438-3242 Option#3. You can also email me at david.holliday@promachbuilt.com. We’ll be sure to get you in touch with an expert, right in your area!

Local save:http://www.labelingnews.com/wp-content/uploads/2019/11/canadaawardgold.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/11/canadaawardgold.jpg

Image exists, checking for same file size

Replacing images : - ON

The Canadian Printing Awards is an annual event, currently in its 14th year, that celebrates the excellence and innovation of the printing industry in Canada.

The awards cover a wide range of print and printing-related categories, Industry Achievement, Print Design, Printing, Technology and Environmental.

The 2019 awards were presented at a gala event in Toronto and a total of 113 gold, silver and bronze awards were presented.

We are thrilled that the newest member of our ProMach Labeling & Coding family, Jet Label swept the awards in the Digital Label category, winning gold, silver and bronze.

Canadian Printing Awards – Congratulations Jet Label!

 

This is a fantastic achievement and all three Jet Label submissions would have been worthy of first place. Here is the gold award and the winning label, printed for Dog Island Brewing:

To show just how consistent the Jet Label quality is, this isn’t the first time our colleagues have dominated the Digital Label category at the awards. Here are the gold, silver and bronze winners from 2018 – see a trend here?

Jet Label is Western Canada’s largest supplier of high-quality labels (both digital and flexo) with large investments in equipment and a super team of motivated professionals. A great addition to the ProMach family.

With 7 label converting and printing plants across the United States and Canada, ProMach is your local label company with national reach and support. Combining our labels with ID Technology and EPI labeling equipment is the best way to ensure your products project the right image.

Want to get started improving your labels and labeling? Contact us today at 888-438-3242 Option#3. You can also email me at david.holliday@promachbuilt.com. We’ll be sure to get you in touch with an expert, right in your area!

Local save:http://www.labelingnews.com/wp-content/uploads/2019/11/2018canadaawards.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/11/2018canadaawards.jpg

Image exists, checking for same file size

Replacing images : - ON

The Canadian Printing Awards is an annual event, currently in its 14th year, that celebrates the excellence and innovation of the printing industry in Canada.

The awards cover a wide range of print and printing-related categories, Industry Achievement, Print Design, Printing, Technology and Environmental.

The 2019 awards were presented at a gala event in Toronto and a total of 113 gold, silver and bronze awards were presented.

We are thrilled that the newest member of our ProMach Labeling & Coding family, Jet Label swept the awards in the Digital Label category, winning gold, silver and bronze.

Canadian Printing Awards – Congratulations Jet Label!

 

This is a fantastic achievement and all three Jet Label submissions would have been worthy of first place. Here is the gold award and the winning label, printed for Dog Island Brewing:

Canadian Printing Awards – Congratulations Jet Label!

To show just how consistent the Jet Label quality is, this isn’t the first time our colleagues have dominated the Digital Label category at the awards. Here are the gold, silver and bronze winners from 2018 – see a trend here?

Jet Label is Western Canada’s largest supplier of high-quality labels (both digital and flexo) with large investments in equipment and a super team of motivated professionals. A great addition to the ProMach family.

With 7 label converting and printing plants across the United States and Canada, ProMach is your local label company with national reach and support. Combining our labels with ID Technology and EPI labeling equipment is the best way to ensure your products project the right image.

Want to get started improving your labels and labeling? Contact us today at 888-438-3242 Option#3. You can also email me at david.holliday@promachbuilt.com. We’ll be sure to get you in touch with an expert, right in your area!

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/11/canadian-printing-awards-congratulations-jet-label/ [syndication_item_hash] => 688fde332c4ebb0e26d74b655a18f93e )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Canadian Printing Awards – Congratulations Jet Label!

Array ( [post_title] => Canadian Printing Awards – Congratulations Jet Label! [post_content] =>

The Canadian Printing Awards is an annual event, currently in its 14th year, that celebrates the excellence and innovation of the printing industry in Canada.

The awards cover a wide range of print and printing-related categories, Industry Achievement, Print Design, Printing, Technology and Environmental.

The 2019 awards were presented at a gala event in Toronto and a total of 113 gold, silver and bronze awards were presented.

We are thrilled that the newest member of our ProMach Labeling & Coding family, Jet Label swept the awards in the Digital Label category, winning gold, silver and bronze.

Canadian Printing Awards – Congratulations Jet Label!

 

This is a fantastic achievement and all three Jet Label submissions would have been worthy of first place. Here is the gold award and the winning label, printed for Dog Island Brewing:

Canadian Printing Awards – Congratulations Jet Label!

To show just how consistent the Jet Label quality is, this isn’t the first time our colleagues have dominated the Digital Label category at the awards. Here are the gold, silver and bronze winners from 2018 – see a trend here?

Canadian Printing Awards – Congratulations Jet Label!

Jet Label is Western Canada’s largest supplier of high-quality labels (both digital and flexo) with large investments in equipment and a super team of motivated professionals. A great addition to the ProMach family.

With 7 label converting and printing plants across the United States and Canada, ProMach is your local label company with national reach and support. Combining our labels with ID Technology and EPI labeling equipment is the best way to ensure your products project the right image.

Want to get started improving your labels and labeling? Contact us today at 888-438-3242 Option#3. You can also email me at david.holliday@promachbuilt.com. We’ll be sure to get you in touch with an expert, right in your area!

[post_excerpt] => The Canadian Printing Awards is an annual event, currently in its 14th year, that celebrates the excellence and innovation of the printing industry in Canada. The awards cover a wide range of print and printing-related categories, Industry Achievement, Print Design, Printing, Technology and Environmental. The 2019 awards were presented at a gala event in Toronto […] [post_date_gmt] => 2019-11-08 22:12:39 [post_date] => 2019-11-08 22:12:39 [post_modified_gmt] => 2019-11-08 22:12:39 [post_modified] => 2019-11-08 22:12:39 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5966 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/11/canadian-printing-awards-congratulations-jet-label/ [syndication_item_hash] => 688fde332c4ebb0e26d74b655a18f93e [faf_featured_image] => 0 [faf_process_image] => 0,0,0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Product Coding for Protein Producers

Array ( [post_title] => Product Coding for Protein Producers [post_content] =>

Regardless of package type, companies that produce meat or poultry products need to add variable information to the package. This includes date and lot codes, establishment codes, regulatory agency logos, and increasingly barcodes.

In many industries, this is quite straightforward, but for protein companies, there is the added complication of the environment in which coding and packaging equipment has to operate. Cold and wet conditions are the norm and any equipment brought into the plants needs to be able to handle this as well as washdown situations.

Traditionally continuous inkjet (CIJ) printers have been used for printing variable information onto meat and poultry packaging. These printers can usually handle the harsh conditions found on the packaging lines and also produce the print quality that is good enough for the applications. Thermal inkjet (TIJ) printers have not been used in the past due to the inks being unsuitable for use on the films used for the packaging.

inkjet printing for protein companies

Over the last few years, however, there have been great advances in the chemistry of inks for TIJ printing and today, this technology is proving to be very successful at printing onto the non-porous substrates used for protein packaging.

The ink cartridges used in thermal inkjet printers ensure that there is no need to have to deal with the MEK and other solvents used in other print technologies, such as CIJ. There is no need to deal with disposing of partially used ink or additive bottles.

With no cleaning cycle needed at startup or shutdown, a thermal inkjet printer is always ready to work.

The thermal inkjet coders provided by ProMach brands, Code Tech & ID Technology, are designed to be able to get the job done in these areas. They bring all the advantages of the thermal inkjet system but include models that are available in IP65 versions, perfect for producing excellent code quality every time, regardless of the environment.

 

Reduce Maintenance & Downtime

A thermal impact printer uses familiar HP type ink cartridges. This means that every time you change the cartridge, you effectively get a new printer.

As a bonus, should you need to change the color of your print, this is accomplished by simply replacing the ink cartridge with one of the required color.

Our TIJ printers come in versions that are built to IP65 environmental protection. This means that regardless of how dirty or wet the packaging environment, the printers will operate happily.

Exceptional Print Quality

With print resolutions of up to 600×600 DPI, thermal inkjet produces perfect prints every time, even when printing very small fonts or high-density barcodes.

Inks are available that are fast drying and durable to suit just about every packaging material.

Quick and Simple Installation and Integration

Thermal inkjet printers from ID Technology and Code Tech have a small footprint, making them easy to install in your parent packaging machine, even when multiple heads are needed.

Combined with the web handling and printer traversing expertise of the Greydon brand, printers from ProMach Labeling & Coding can be integrated with every type of flexible packaging machine.

Is TIJ Always the Best Technology to Use?

No, not always.

Thermal inkjet brings some important advantages, but there are times where an alternative technology such as CIJ printing, thermal transfer, laser or ink stamping might make sense. We happen to sell a complete range of coding technologies so we can work with you to help decide which is best for your unique needs.

Want to Get Started?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

[post_excerpt] => Regardless of package type, companies that produce meat or poultry products need to add variable information to the package. This includes date and lot codes, establishment codes, regulatory agency logos, and increasingly barcodes. In many industries, this is quite straightforward, but for protein companies, there is the added complication of the environment in which coding […] [post_date_gmt] => 2019-08-07 14:47:49 [post_date] => 2019-08-07 14:47:49 [post_modified_gmt] => 2019-08-07 14:47:49 [post_modified] => 2019-08-07 14:47:49 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5958 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/08/product-coding-for-protein-producers/ [syndication_item_hash] => bf79e38cb1b9f7707482459ba38d1477 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2019/08/washdown-codetech.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/08/washdown-codetech.jpg

Image exists, checking for same file size

Replacing images : inkjet printing for protein companies - inkjet printing for protein companies ON

Regardless of package type, companies that produce meat or poultry products need to add variable information to the package. This includes date and lot codes, establishment codes, regulatory agency logos, and increasingly barcodes.

In many industries, this is quite straightforward, but for protein companies, there is the added complication of the environment in which coding and packaging equipment has to operate. Cold and wet conditions are the norm and any equipment brought into the plants needs to be able to handle this as well as washdown situations.

Traditionally continuous inkjet (CIJ) printers have been used for printing variable information onto meat and poultry packaging. These printers can usually handle the harsh conditions found on the packaging lines and also produce the print quality that is good enough for the applications. Thermal inkjet (TIJ) printers have not been used in the past due to the inks being unsuitable for use on the films used for the packaging.

inkjet printing for protein companies

Over the last few years, however, there have been great advances in the chemistry of inks for TIJ printing and today, this technology is proving to be very successful at printing onto the non-porous substrates used for protein packaging.

The ink cartridges used in thermal inkjet printers ensure that there is no need to have to deal with the MEK and other solvents used in other print technologies, such as CIJ. There is no need to deal with disposing of partially used ink or additive bottles.

With no cleaning cycle needed at startup or shutdown, a thermal inkjet printer is always ready to work.

The thermal inkjet coders provided by ProMach brands, Code Tech & ID Technology, are designed to be able to get the job done in these areas. They bring all the advantages of the thermal inkjet system but include models that are available in IP65 versions, perfect for producing excellent code quality every time, regardless of the environment.

 

Reduce Maintenance & Downtime

A thermal impact printer uses familiar HP type ink cartridges. This means that every time you change the cartridge, you effectively get a new printer.

As a bonus, should you need to change the color of your print, this is accomplished by simply replacing the ink cartridge with one of the required color.

Our TIJ printers come in versions that are built to IP65 environmental protection. This means that regardless of how dirty or wet the packaging environment, the printers will operate happily.

Exceptional Print Quality

With print resolutions of up to 600×600 DPI, thermal inkjet produces perfect prints every time, even when printing very small fonts or high-density barcodes.

Inks are available that are fast drying and durable to suit just about every packaging material.

Quick and Simple Installation and Integration

Thermal inkjet printers from ID Technology and Code Tech have a small footprint, making them easy to install in your parent packaging machine, even when multiple heads are needed.

Combined with the web handling and printer traversing expertise of the Greydon brand, printers from ProMach Labeling & Coding can be integrated with every type of flexible packaging machine.

Is TIJ Always the Best Technology to Use?

No, not always.

Thermal inkjet brings some important advantages, but there are times where an alternative technology such as CIJ printing, thermal transfer, laser or ink stamping might make sense. We happen to sell a complete range of coding technologies so we can work with you to help decide which is best for your unique needs.

Want to Get Started?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

Local save:http://www.labelingnews.com/wp-content/uploads/2019/08/tij-protein-samples.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/08/tij-protein-samples.jpg

Image exists, checking for same file size

Replacing images : - ON

Regardless of package type, companies that produce meat or poultry products need to add variable information to the package. This includes date and lot codes, establishment codes, regulatory agency logos, and increasingly barcodes.

In many industries, this is quite straightforward, but for protein companies, there is the added complication of the environment in which coding and packaging equipment has to operate. Cold and wet conditions are the norm and any equipment brought into the plants needs to be able to handle this as well as washdown situations.

Traditionally continuous inkjet (CIJ) printers have been used for printing variable information onto meat and poultry packaging. These printers can usually handle the harsh conditions found on the packaging lines and also produce the print quality that is good enough for the applications. Thermal inkjet (TIJ) printers have not been used in the past due to the inks being unsuitable for use on the films used for the packaging.

Product Coding for Protein Producers

Over the last few years, however, there have been great advances in the chemistry of inks for TIJ printing and today, this technology is proving to be very successful at printing onto the non-porous substrates used for protein packaging.

The ink cartridges used in thermal inkjet printers ensure that there is no need to have to deal with the MEK and other solvents used in other print technologies, such as CIJ. There is no need to deal with disposing of partially used ink or additive bottles.

With no cleaning cycle needed at startup or shutdown, a thermal inkjet printer is always ready to work.

The thermal inkjet coders provided by ProMach brands, Code Tech & ID Technology, are designed to be able to get the job done in these areas. They bring all the advantages of the thermal inkjet system but include models that are available in IP65 versions, perfect for producing excellent code quality every time, regardless of the environment.

 

Reduce Maintenance & Downtime

A thermal impact printer uses familiar HP type ink cartridges. This means that every time you change the cartridge, you effectively get a new printer.

As a bonus, should you need to change the color of your print, this is accomplished by simply replacing the ink cartridge with one of the required color.

Our TIJ printers come in versions that are built to IP65 environmental protection. This means that regardless of how dirty or wet the packaging environment, the printers will operate happily.

Exceptional Print Quality

With print resolutions of up to 600×600 DPI, thermal inkjet produces perfect prints every time, even when printing very small fonts or high-density barcodes.

Inks are available that are fast drying and durable to suit just about every packaging material.

Quick and Simple Installation and Integration

Thermal inkjet printers from ID Technology and Code Tech have a small footprint, making them easy to install in your parent packaging machine, even when multiple heads are needed.

Combined with the web handling and printer traversing expertise of the Greydon brand, printers from ProMach Labeling & Coding can be integrated with every type of flexible packaging machine.

Is TIJ Always the Best Technology to Use?

No, not always.

Thermal inkjet brings some important advantages, but there are times where an alternative technology such as CIJ printing, thermal transfer, laser or ink stamping might make sense. We happen to sell a complete range of coding technologies so we can work with you to help decide which is best for your unique needs.

Want to Get Started?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/08/product-coding-for-protein-producers/ [syndication_item_hash] => bf79e38cb1b9f7707482459ba38d1477 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Product Coding for Protein Producers

Array ( [post_title] => Product Coding for Protein Producers [post_content] =>

Regardless of package type, companies that produce meat or poultry products need to add variable information to the package. This includes date and lot codes, establishment codes, regulatory agency logos, and increasingly barcodes.

In many industries, this is quite straightforward, but for protein companies, there is the added complication of the environment in which coding and packaging equipment has to operate. Cold and wet conditions are the norm and any equipment brought into the plants needs to be able to handle this as well as washdown situations.

Traditionally continuous inkjet (CIJ) printers have been used for printing variable information onto meat and poultry packaging. These printers can usually handle the harsh conditions found on the packaging lines and also produce the print quality that is good enough for the applications. Thermal inkjet (TIJ) printers have not been used in the past due to the inks being unsuitable for use on the films used for the packaging.

Product Coding for Protein Producers

Over the last few years, however, there have been great advances in the chemistry of inks for TIJ printing and today, this technology is proving to be very successful at printing onto the non-porous substrates used for protein packaging.Product Coding for Protein Producers

The ink cartridges used in thermal inkjet printers ensure that there is no need to have to deal with the MEK and other solvents used in other print technologies, such as CIJ. There is no need to deal with disposing of partially used ink or additive bottles.

With no cleaning cycle needed at startup or shutdown, a thermal inkjet printer is always ready to work.

The thermal inkjet coders provided by ProMach brands, Code Tech & ID Technology, are designed to be able to get the job done in these areas. They bring all the advantages of the thermal inkjet system but include models that are available in IP65 versions, perfect for producing excellent code quality every time, regardless of the environment.

 

Reduce Maintenance & Downtime

A thermal impact printer uses familiar HP type ink cartridges. This means that every time you change the cartridge, you effectively get a new printer.

As a bonus, should you need to change the color of your print, this is accomplished by simply replacing the ink cartridge with one of the required color.

Our TIJ printers come in versions that are built to IP65 environmental protection. This means that regardless of how dirty or wet the packaging environment, the printers will operate happily.

Exceptional Print Quality

With print resolutions of up to 600×600 DPI, thermal inkjet produces perfect prints every time, even when printing very small fonts or high-density barcodes.

Inks are available that are fast drying and durable to suit just about every packaging material.

Quick and Simple Installation and Integration

Thermal inkjet printers from ID Technology and Code Tech have a small footprint, making them easy to install in your parent packaging machine, even when multiple heads are needed.

Combined with the web handling and printer traversing expertise of the Greydon brand, printers from ProMach Labeling & Coding can be integrated with every type of flexible packaging machine.

Is TIJ Always the Best Technology to Use?

No, not always.

Thermal inkjet brings some important advantages, but there are times where an alternative technology such as CIJ printing, thermal transfer, laser or ink stamping might make sense. We happen to sell a complete range of coding technologies so we can work with you to help decide which is best for your unique needs.

Want to Get Started?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

[post_excerpt] => Regardless of package type, companies that produce meat or poultry products need to add variable information to the package. This includes date and lot codes, establishment codes, regulatory agency logos, and increasingly barcodes. In many industries, this is quite straightforward, but for protein companies, there is the added complication of the environment in which coding […] [post_date_gmt] => 2019-08-07 14:47:49 [post_date] => 2019-08-07 14:47:49 [post_modified_gmt] => 2019-08-07 14:47:49 [post_modified] => 2019-08-07 14:47:49 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5958 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/08/product-coding-for-protein-producers/ [syndication_item_hash] => bf79e38cb1b9f7707482459ba38d1477 [faf_featured_image] => 0 [faf_process_image] => 0,0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Customer Engagement and More – GS1 Digital Link

Array ( [post_title] => Customer Engagement and More – GS1 Digital Link [post_content] =>

Using barcodes on packages for customer engagement? This idea is certainly not new – here is a link to a Packaging World article on this very topic from 2011.

The article specifically mentioned that QR codes would provide the ability to download coupons, enter contests, play games, and other fun activities – all powered by those little barcodes.

This all seemed quite exciting, but QR codes got old quickly and the concept seemed to fade away.

Fast forward to today and there is renewed interest in using packaging to actively engage with customers.

Listen to our GS1 Digital Link Podcast

Traditional ways to communicate to customers such as TV and print advertising are not performing as well as In the past.  These are also a one-way form of communication, yelling a message at consumers – no wonder they don’t work as well as in the past. In addition, engagement on a brand’s social media pages is in decline as well. What is a marketer to do?

As a result of all this, brand owners have a renewed interest trying to set up a direct connection to their customers based on the product packaging – the package is potentially the ultimate marketing tool.
Enter smart packaging – a means to allow brands to connect directly with their customers. Generally, a smart package will allow the customer to scan a barcode (yes, usually a QR Code) and be connected to an interactive website.

So QR codes are back – a lot of brands are using them – some quite creatively

Currently, there isn’t a standard to use QR codes  (or any type of barcode) for customer engagement so brands are tending to encode them in different ways – often just a URL, sometimes other data.
Of course, the package’s UPC  barcode still needs to be there so most items would have to have multiple barcodes – rather messy and takes up more space on the package.
The product UPC codes scanned at the point of sale haven’t really changed in the 45 years since the concept was introduced.

Wouldn’t it be great if, rather than have multiple barcodes on a package, a single one could contain the UPC data, weblink for customer engagement? Maybe we can!

Last year GS1 our favorite standards organization came out with a new concept: GS1 Digital Link.

While the name might not be too exciting, Digital Link has the potential to revolutionize how barcoding is used, to add true customer engagement and to (yes really) provide item-level serialization and traceability.
For primary packaging (what we would buy in a store), GS1’s barcoding is built around the concept of the Global Trade Item Number – GTIN. This is what is encoded in the common UPC barcode that is scanned at the checkout.
The GTIN in the item barcode basically consists of a company prefix and an SKU or stock keeping unit number. The GTIN identifies a type of product – a 12oz can of Pepsi Cola or an 8 oz bag of salt n vinegar Lay’s chips for example. Every item sold at retail and many other products that use the GS1 system (such as pharmaceutical or medical products) has a GTIN.
It is important to note that a GTIN doesn’t identify an individual item – every 12oz can of Pepsi will have the same GTIN.
Also, no additional data can be encoded in the product barcode – only the 12 digit UPC in the US or 13 digit EAN code internationally. This is why additional barcodes must currently be added to a package in the event a brand owner wants to encode more data.
Traditionally, barcodes in the GS1 system have been used in the supply chain from manufacturer to point of sale. They lose their usefulness once the product has been sold. GS1 Digital Link promises to extend the reach of the GS1 system all the way from the manufacturer to consumer and to provide a means of interaction between the brand owner and the consumer.

So how does it work?

For the first time, GS1 is allowing a 2D QR barcode to be used as the barcode for point of sale.
Encoded within the barcode is a URI (unique resource identifier – an example of which is the familiar website URLs we use every day) and a number of other possible data fields that include:
GTIN
Lot number
Serial number
The expiration date and many more
Some examples:
Note, the examples use the domain id.gs1.org, but brand owners can use their own domains.
An interesting addition to the new specification is that the data fields can be identified by either using the familiar GS1 Application Identifiers (AI) or by text identifiers. Note that this is only a quick intro, so check out the GS1 Digital Link specification to get complete information.
  The ability to include all this data in one barcode means that only one barcode needs to be printed on the package and it can be used for point of sale, traceability, anti-counterfeit and for customer engagement by sending a consumer who scans the code to an interactive website.
GS1 Digital Link could prove to be the biggest revolution in barcoding since the first code was scanned in a store 45 years ago.

When will this start?

It is going to take a while and we can expect to see both traditional UPC codes and the new QR codes used side by side until the infrastructure is in place to handle the new 2D barcodes.
 A survey carried out by the food marketing institute found that in the US nearly 40% of POS scanners are capable of reading 2D codes today and that will increase to about 55% by 2022.
The POS systems to handle the data are running somewhat behind, with an estimated 20% of systems being able to handle this data.
There is clearly a ways to go.
In the same survey, stakeholders saw the advantages of switching to data-rich solutions such as follows:
60% stated better inventory accuracy
40% stated better customer engagement
36% stated anti-counterfeit
35% stated improved recall control
33% stated expiration date control
* Yes, people could choose more than one.
Finally, 85% of stakeholders see 3-5 years to get a higher data density solution to the current UPC established.
So there is certainly a lot of interest in GS1 Digital Link. While I’ve discussed the use of QR codes in this podcast, other data carriers that could be used (and be very interesting) are NFC RFID tags and the Digimarc system that turns the complete package into the barcode. Digimarc will be the topic of a future podcast.
Should be interesting days ahead.
How can we help you meet your objectives for your labeling and barcode operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!
[post_excerpt] => Using barcodes on packages for customer engagement? This idea is certainly not new – here is a link to a Packaging World article on this very topic from 2011. The article specifically mentioned that QR codes would provide the ability to download coupons, enter contests, play games, and other fun activities – all powered by […] [post_date_gmt] => 2019-08-05 18:10:41 [post_date] => 2019-08-05 18:10:41 [post_modified_gmt] => 2019-08-05 18:10:41 [post_modified] => 2019-08-05 18:10:41 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5952 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/08/customer-engagement-and-more-gs1-digital-link/ [syndication_item_hash] => 1e5148b5aacb103170db86cec5f4b5cf ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2019/08/GS1DL-HEADER.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/08/GS1DL-HEADER.jpg

Image exists, checking for same file size

Replacing images : - ON

Using barcodes on packages for customer engagement? This idea is certainly not new – here is a link to a Packaging World article on this very topic from 2011.

The article specifically mentioned that QR codes would provide the ability to download coupons, enter contests, play games, and other fun activities – all powered by those little barcodes.

This all seemed quite exciting, but QR codes got old quickly and the concept seemed to fade away.

Fast forward to today and there is renewed interest in using packaging to actively engage with customers.

Listen to our GS1 Digital Link Podcast

Traditional ways to communicate to customers such as TV and print advertising are not performing as well as In the past.  These are also a one-way form of communication, yelling a message at consumers – no wonder they don’t work as well as in the past. In addition, engagement on a brand’s social media pages is in decline as well. What is a marketer to do?

As a result of all this, brand owners have a renewed interest trying to set up a direct connection to their customers based on the product packaging – the package is potentially the ultimate marketing tool.
Enter smart packaging – a means to allow brands to connect directly with their customers. Generally, a smart package will allow the customer to scan a barcode (yes, usually a QR Code) and be connected to an interactive website.

So QR codes are back – a lot of brands are using them – some quite creatively

Currently, there isn’t a standard to use QR codes  (or any type of barcode) for customer engagement so brands are tending to encode them in different ways – often just a URL, sometimes other data.
Of course, the package’s UPC  barcode still needs to be there so most items would have to have multiple barcodes – rather messy and takes up more space on the package.
The product UPC codes scanned at the point of sale haven’t really changed in the 45 years since the concept was introduced.

Wouldn’t it be great if, rather than have multiple barcodes on a package, a single one could contain the UPC data, weblink for customer engagement? Maybe we can!

Last year GS1 our favorite standards organization came out with a new concept: GS1 Digital Link.

While the name might not be too exciting, Digital Link has the potential to revolutionize how barcoding is used, to add true customer engagement and to (yes really) provide item-level serialization and traceability.
For primary packaging (what we would buy in a store), GS1’s barcoding is built around the concept of the Global Trade Item Number – GTIN. This is what is encoded in the common UPC barcode that is scanned at the checkout.
The GTIN in the item barcode basically consists of a company prefix and an SKU or stock keeping unit number. The GTIN identifies a type of product – a 12oz can of Pepsi Cola or an 8 oz bag of salt n vinegar Lay’s chips for example. Every item sold at retail and many other products that use the GS1 system (such as pharmaceutical or medical products) has a GTIN.
It is important to note that a GTIN doesn’t identify an individual item – every 12oz can of Pepsi will have the same GTIN.
Also, no additional data can be encoded in the product barcode – only the 12 digit UPC in the US or 13 digit EAN code internationally. This is why additional barcodes must currently be added to a package in the event a brand owner wants to encode more data.
Traditionally, barcodes in the GS1 system have been used in the supply chain from manufacturer to point of sale. They lose their usefulness once the product has been sold. GS1 Digital Link promises to extend the reach of the GS1 system all the way from the manufacturer to consumer and to provide a means of interaction between the brand owner and the consumer.

So how does it work?

For the first time, GS1 is allowing a 2D QR barcode to be used as the barcode for point of sale.
Encoded within the barcode is a URI (unique resource identifier – an example of which is the familiar website URLs we use every day) and a number of other possible data fields that include:
GTIN
Lot number
Serial number
The expiration date and many more
Some examples:
Note, the examples use the domain id.gs1.org, but brand owners can use their own domains.
An interesting addition to the new specification is that the data fields can be identified by either using the familiar GS1 Application Identifiers (AI) or by text identifiers. Note that this is only a quick intro, so check out the GS1 Digital Link specification to get complete information.
  The ability to include all this data in one barcode means that only one barcode needs to be printed on the package and it can be used for point of sale, traceability, anti-counterfeit and for customer engagement by sending a consumer who scans the code to an interactive website.
GS1 Digital Link could prove to be the biggest revolution in barcoding since the first code was scanned in a store 45 years ago.

When will this start?

It is going to take a while and we can expect to see both traditional UPC codes and the new QR codes used side by side until the infrastructure is in place to handle the new 2D barcodes.
 A survey carried out by the food marketing institute found that in the US nearly 40% of POS scanners are capable of reading 2D codes today and that will increase to about 55% by 2022.
The POS systems to handle the data are running somewhat behind, with an estimated 20% of systems being able to handle this data.
There is clearly a ways to go.
In the same survey, stakeholders saw the advantages of switching to data-rich solutions such as follows:
60% stated better inventory accuracy
40% stated better customer engagement
36% stated anti-counterfeit
35% stated improved recall control
33% stated expiration date control
* Yes, people could choose more than one.
Finally, 85% of stakeholders see 3-5 years to get a higher data density solution to the current UPC established.
So there is certainly a lot of interest in GS1 Digital Link. While I’ve discussed the use of QR codes in this podcast, other data carriers that could be used (and be very interesting) are NFC RFID tags and the Digimarc system that turns the complete package into the barcode. Digimarc will be the topic of a future podcast.
Should be interesting days ahead.
How can we help you meet your objectives for your labeling and barcode operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

Local save:http://www.labelingnews.com/wp-content/uploads/2019/08/LNPodcastImage-150x150.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/08/LNPodcastImage-150x150.jpg

Image exists, checking for same file size

Replacing images : - ON

Customer Engagement and More – GS1 Digital Link

Using barcodes on packages for customer engagement? This idea is certainly not new – here is a link to a Packaging World article on this very topic from 2011.

The article specifically mentioned that QR codes would provide the ability to download coupons, enter contests, play games, and other fun activities – all powered by those little barcodes.

This all seemed quite exciting, but QR codes got old quickly and the concept seemed to fade away.

Fast forward to today and there is renewed interest in using packaging to actively engage with customers.

Listen to our GS1 Digital Link Podcast

Traditional ways to communicate to customers such as TV and print advertising are not performing as well as In the past.  These are also a one-way form of communication, yelling a message at consumers – no wonder they don’t work as well as in the past. In addition, engagement on a brand’s social media pages is in decline as well. What is a marketer to do?

As a result of all this, brand owners have a renewed interest trying to set up a direct connection to their customers based on the product packaging – the package is potentially the ultimate marketing tool.
Enter smart packaging – a means to allow brands to connect directly with their customers. Generally, a smart package will allow the customer to scan a barcode (yes, usually a QR Code) and be connected to an interactive website.

So QR codes are back – a lot of brands are using them – some quite creatively

Currently, there isn’t a standard to use QR codes  (or any type of barcode) for customer engagement so brands are tending to encode them in different ways – often just a URL, sometimes other data.
Of course, the package’s UPC  barcode still needs to be there so most items would have to have multiple barcodes – rather messy and takes up more space on the package.
The product UPC codes scanned at the point of sale haven’t really changed in the 45 years since the concept was introduced.

Wouldn’t it be great if, rather than have multiple barcodes on a package, a single one could contain the UPC data, weblink for customer engagement? Maybe we can!

Last year GS1 our favorite standards organization came out with a new concept: GS1 Digital Link.

While the name might not be too exciting, Digital Link has the potential to revolutionize how barcoding is used, to add true customer engagement and to (yes really) provide item-level serialization and traceability.
For primary packaging (what we would buy in a store), GS1’s barcoding is built around the concept of the Global Trade Item Number – GTIN. This is what is encoded in the common UPC barcode that is scanned at the checkout.
The GTIN in the item barcode basically consists of a company prefix and an SKU or stock keeping unit number. The GTIN identifies a type of product – a 12oz can of Pepsi Cola or an 8 oz bag of salt n vinegar Lay’s chips for example. Every item sold at retail and many other products that use the GS1 system (such as pharmaceutical or medical products) has a GTIN.
It is important to note that a GTIN doesn’t identify an individual item – every 12oz can of Pepsi will have the same GTIN.
Also, no additional data can be encoded in the product barcode – only the 12 digit UPC in the US or 13 digit EAN code internationally. This is why additional barcodes must currently be added to a package in the event a brand owner wants to encode more data.
Traditionally, barcodes in the GS1 system have been used in the supply chain from manufacturer to point of sale. They lose their usefulness once the product has been sold. GS1 Digital Link promises to extend the reach of the GS1 system all the way from the manufacturer to consumer and to provide a means of interaction between the brand owner and the consumer.

So how does it work?

For the first time, GS1 is allowing a 2D QR barcode to be used as the barcode for point of sale.
Encoded within the barcode is a URI (unique resource identifier – an example of which is the familiar website URLs we use every day) and a number of other possible data fields that include:
GTIN
Lot number
Serial number
The expiration date and many more
Some examples:
Note, the examples use the domain id.gs1.org, but brand owners can use their own domains.
An interesting addition to the new specification is that the data fields can be identified by either using the familiar GS1 Application Identifiers (AI) or by text identifiers. Note that this is only a quick intro, so check out the GS1 Digital Link specification to get complete information.
  The ability to include all this data in one barcode means that only one barcode needs to be printed on the package and it can be used for point of sale, traceability, anti-counterfeit and for customer engagement by sending a consumer who scans the code to an interactive website.
GS1 Digital Link could prove to be the biggest revolution in barcoding since the first code was scanned in a store 45 years ago.

When will this start?

It is going to take a while and we can expect to see both traditional UPC codes and the new QR codes used side by side until the infrastructure is in place to handle the new 2D barcodes.
 A survey carried out by the food marketing institute found that in the US nearly 40% of POS scanners are capable of reading 2D codes today and that will increase to about 55% by 2022.
The POS systems to handle the data are running somewhat behind, with an estimated 20% of systems being able to handle this data.
There is clearly a ways to go.
In the same survey, stakeholders saw the advantages of switching to data-rich solutions such as follows:
60% stated better inventory accuracy
40% stated better customer engagement
36% stated anti-counterfeit
35% stated improved recall control
33% stated expiration date control
* Yes, people could choose more than one.
Finally, 85% of stakeholders see 3-5 years to get a higher data density solution to the current UPC established.
So there is certainly a lot of interest in GS1 Digital Link. While I’ve discussed the use of QR codes in this podcast, other data carriers that could be used (and be very interesting) are NFC RFID tags and the Digimarc system that turns the complete package into the barcode. Digimarc will be the topic of a future podcast.
Should be interesting days ahead.
How can we help you meet your objectives for your labeling and barcode operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

Local save:http://www.labelingnews.com/wp-content/uploads/2019/08/GS1DL-gtin.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/08/GS1DL-gtin.jpg

Image exists, checking for same file size

Replacing images : - ON

Customer Engagement and More – GS1 Digital Link

Using barcodes on packages for customer engagement? This idea is certainly not new – here is a link to a Packaging World article on this very topic from 2011.

The article specifically mentioned that QR codes would provide the ability to download coupons, enter contests, play games, and other fun activities – all powered by those little barcodes.

This all seemed quite exciting, but QR codes got old quickly and the concept seemed to fade away.

Fast forward to today and there is renewed interest in using packaging to actively engage with customers.

Customer Engagement and More – GS1 Digital Link

Listen to our GS1 Digital Link Podcast

Traditional ways to communicate to customers such as TV and print advertising are not performing as well as In the past.  These are also a one-way form of communication, yelling a message at consumers – no wonder they don’t work as well as in the past. In addition, engagement on a brand’s social media pages is in decline as well. What is a marketer to do?

As a result of all this, brand owners have a renewed interest trying to set up a direct connection to their customers based on the product packaging – the package is potentially the ultimate marketing tool.
Enter smart packaging – a means to allow brands to connect directly with their customers. Generally, a smart package will allow the customer to scan a barcode (yes, usually a QR Code) and be connected to an interactive website.

So QR codes are back – a lot of brands are using them – some quite creatively

Currently, there isn’t a standard to use QR codes  (or any type of barcode) for customer engagement so brands are tending to encode them in different ways – often just a URL, sometimes other data.
Of course, the package’s UPC  barcode still needs to be there so most items would have to have multiple barcodes – rather messy and takes up more space on the package.
The product UPC codes scanned at the point of sale haven’t really changed in the 45 years since the concept was introduced.

Wouldn’t it be great if, rather than have multiple barcodes on a package, a single one could contain the UPC data, weblink for customer engagement? Maybe we can!

Last year GS1 our favorite standards organization came out with a new concept: GS1 Digital Link.

While the name might not be too exciting, Digital Link has the potential to revolutionize how barcoding is used, to add true customer engagement and to (yes really) provide item-level serialization and traceability.
For primary packaging (what we would buy in a store), GS1’s barcoding is built around the concept of the Global Trade Item Number – GTIN. This is what is encoded in the common UPC barcode that is scanned at the checkout.
The GTIN in the item barcode basically consists of a company prefix and an SKU or stock keeping unit number. The GTIN identifies a type of product – a 12oz can of Pepsi Cola or an 8 oz bag of salt n vinegar Lay’s chips for example. Every item sold at retail and many other products that use the GS1 system (such as pharmaceutical or medical products) has a GTIN.
It is important to note that a GTIN doesn’t identify an individual item – every 12oz can of Pepsi will have the same GTIN.
Also, no additional data can be encoded in the product barcode – only the 12 digit UPC in the US or 13 digit EAN code internationally. This is why additional barcodes must currently be added to a package in the event a brand owner wants to encode more data.
Traditionally, barcodes in the GS1 system have been used in the supply chain from manufacturer to point of sale. They lose their usefulness once the product has been sold. GS1 Digital Link promises to extend the reach of the GS1 system all the way from the manufacturer to consumer and to provide a means of interaction between the brand owner and the consumer.

So how does it work?

For the first time, GS1 is allowing a 2D QR barcode to be used as the barcode for point of sale.
Encoded within the barcode is a URI (unique resource identifier – an example of which is the familiar website URLs we use every day) and a number of other possible data fields that include:
GTIN
Lot number
Serial number
The expiration date and many more
Some examples:
Note, the examples use the domain id.gs1.org, but brand owners can use their own domains.
An interesting addition to the new specification is that the data fields can be identified by either using the familiar GS1 Application Identifiers (AI) or by text identifiers. Note that this is only a quick intro, so check out the GS1 Digital Link specification to get complete information.
  The ability to include all this data in one barcode means that only one barcode needs to be printed on the package and it can be used for point of sale, traceability, anti-counterfeit and for customer engagement by sending a consumer who scans the code to an interactive website.
GS1 Digital Link could prove to be the biggest revolution in barcoding since the first code was scanned in a store 45 years ago.

When will this start?

It is going to take a while and we can expect to see both traditional UPC codes and the new QR codes used side by side until the infrastructure is in place to handle the new 2D barcodes.
 A survey carried out by the food marketing institute found that in the US nearly 40% of POS scanners are capable of reading 2D codes today and that will increase to about 55% by 2022.
The POS systems to handle the data are running somewhat behind, with an estimated 20% of systems being able to handle this data.
There is clearly a ways to go.
In the same survey, stakeholders saw the advantages of switching to data-rich solutions such as follows:
60% stated better inventory accuracy
40% stated better customer engagement
36% stated anti-counterfeit
35% stated improved recall control
33% stated expiration date control
* Yes, people could choose more than one.
Finally, 85% of stakeholders see 3-5 years to get a higher data density solution to the current UPC established.
So there is certainly a lot of interest in GS1 Digital Link. While I’ve discussed the use of QR codes in this podcast, other data carriers that could be used (and be very interesting) are NFC RFID tags and the Digimarc system that turns the complete package into the barcode. Digimarc will be the topic of a future podcast.
Should be interesting days ahead.
How can we help you meet your objectives for your labeling and barcode operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

Local save:http://www.labelingnews.com/wp-content/uploads/2019/08/GS1DL-sgtin.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/08/GS1DL-sgtin.jpg

Image exists, checking for same file size

Replacing images : - ON

Customer Engagement and More – GS1 Digital Link

Using barcodes on packages for customer engagement? This idea is certainly not new – here is a link to a Packaging World article on this very topic from 2011.

The article specifically mentioned that QR codes would provide the ability to download coupons, enter contests, play games, and other fun activities – all powered by those little barcodes.

This all seemed quite exciting, but QR codes got old quickly and the concept seemed to fade away.

Fast forward to today and there is renewed interest in using packaging to actively engage with customers.

Customer Engagement and More – GS1 Digital Link

Listen to our GS1 Digital Link Podcast

Traditional ways to communicate to customers such as TV and print advertising are not performing as well as In the past.  These are also a one-way form of communication, yelling a message at consumers – no wonder they don’t work as well as in the past. In addition, engagement on a brand’s social media pages is in decline as well. What is a marketer to do?

As a result of all this, brand owners have a renewed interest trying to set up a direct connection to their customers based on the product packaging – the package is potentially the ultimate marketing tool.
Enter smart packaging – a means to allow brands to connect directly with their customers. Generally, a smart package will allow the customer to scan a barcode (yes, usually a QR Code) and be connected to an interactive website.

So QR codes are back – a lot of brands are using them – some quite creatively

Currently, there isn’t a standard to use QR codes  (or any type of barcode) for customer engagement so brands are tending to encode them in different ways – often just a URL, sometimes other data.
Of course, the package’s UPC  barcode still needs to be there so most items would have to have multiple barcodes – rather messy and takes up more space on the package.
The product UPC codes scanned at the point of sale haven’t really changed in the 45 years since the concept was introduced.

Wouldn’t it be great if, rather than have multiple barcodes on a package, a single one could contain the UPC data, weblink for customer engagement? Maybe we can!

Last year GS1 our favorite standards organization came out with a new concept: GS1 Digital Link.

While the name might not be too exciting, Digital Link has the potential to revolutionize how barcoding is used, to add true customer engagement and to (yes really) provide item-level serialization and traceability.
For primary packaging (what we would buy in a store), GS1’s barcoding is built around the concept of the Global Trade Item Number – GTIN. This is what is encoded in the common UPC barcode that is scanned at the checkout.
The GTIN in the item barcode basically consists of a company prefix and an SKU or stock keeping unit number. The GTIN identifies a type of product – a 12oz can of Pepsi Cola or an 8 oz bag of salt n vinegar Lay’s chips for example. Every item sold at retail and many other products that use the GS1 system (such as pharmaceutical or medical products) has a GTIN.
It is important to note that a GTIN doesn’t identify an individual item – every 12oz can of Pepsi will have the same GTIN.
Also, no additional data can be encoded in the product barcode – only the 12 digit UPC in the US or 13 digit EAN code internationally. This is why additional barcodes must currently be added to a package in the event a brand owner wants to encode more data.
Traditionally, barcodes in the GS1 system have been used in the supply chain from manufacturer to point of sale. They lose their usefulness once the product has been sold. GS1 Digital Link promises to extend the reach of the GS1 system all the way from the manufacturer to consumer and to provide a means of interaction between the brand owner and the consumer.

So how does it work?

For the first time, GS1 is allowing a 2D QR barcode to be used as the barcode for point of sale.
Encoded within the barcode is a URI (unique resource identifier – an example of which is the familiar website URLs we use every day) and a number of other possible data fields that include:
GTIN
Lot number
Serial number
The expiration date and many more
Some examples:
Note, the examples use the domain id.gs1.org, but brand owners can use their own domains.
Customer Engagement and More – GS1 Digital Link
An interesting addition to the new specification is that the data fields can be identified by either using the familiar GS1 Application Identifiers (AI) or by text identifiers. Note that this is only a quick intro, so check out the GS1 Digital Link specification to get complete information.
  The ability to include all this data in one barcode means that only one barcode needs to be printed on the package and it can be used for point of sale, traceability, anti-counterfeit and for customer engagement by sending a consumer who scans the code to an interactive website.
GS1 Digital Link could prove to be the biggest revolution in barcoding since the first code was scanned in a store 45 years ago.

When will this start?

It is going to take a while and we can expect to see both traditional UPC codes and the new QR codes used side by side until the infrastructure is in place to handle the new 2D barcodes.
 A survey carried out by the food marketing institute found that in the US nearly 40% of POS scanners are capable of reading 2D codes today and that will increase to about 55% by 2022.
The POS systems to handle the data are running somewhat behind, with an estimated 20% of systems being able to handle this data.
There is clearly a ways to go.
In the same survey, stakeholders saw the advantages of switching to data-rich solutions such as follows:
60% stated better inventory accuracy
40% stated better customer engagement
36% stated anti-counterfeit
35% stated improved recall control
33% stated expiration date control
* Yes, people could choose more than one.
Finally, 85% of stakeholders see 3-5 years to get a higher data density solution to the current UPC established.
So there is certainly a lot of interest in GS1 Digital Link. While I’ve discussed the use of QR codes in this podcast, other data carriers that could be used (and be very interesting) are NFC RFID tags and the Digimarc system that turns the complete package into the barcode. Digimarc will be the topic of a future podcast.
Should be interesting days ahead.
How can we help you meet your objectives for your labeling and barcode operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

Local save:http://www.labelingnews.com/wp-content/uploads/2019/08/GS1DL-gtin-other-data.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/08/GS1DL-gtin-other-data.jpg

Image exists, checking for same file size

Replacing images : - ON

Customer Engagement and More – GS1 Digital Link

Using barcodes on packages for customer engagement? This idea is certainly not new – here is a link to a Packaging World article on this very topic from 2011.

The article specifically mentioned that QR codes would provide the ability to download coupons, enter contests, play games, and other fun activities – all powered by those little barcodes.

This all seemed quite exciting, but QR codes got old quickly and the concept seemed to fade away.

Fast forward to today and there is renewed interest in using packaging to actively engage with customers.

Customer Engagement and More – GS1 Digital Link

Listen to our GS1 Digital Link Podcast

Traditional ways to communicate to customers such as TV and print advertising are not performing as well as In the past.  These are also a one-way form of communication, yelling a message at consumers – no wonder they don’t work as well as in the past. In addition, engagement on a brand’s social media pages is in decline as well. What is a marketer to do?

As a result of all this, brand owners have a renewed interest trying to set up a direct connection to their customers based on the product packaging – the package is potentially the ultimate marketing tool.
Enter smart packaging – a means to allow brands to connect directly with their customers. Generally, a smart package will allow the customer to scan a barcode (yes, usually a QR Code) and be connected to an interactive website.

So QR codes are back – a lot of brands are using them – some quite creatively

Currently, there isn’t a standard to use QR codes  (or any type of barcode) for customer engagement so brands are tending to encode them in different ways – often just a URL, sometimes other data.
Of course, the package’s UPC  barcode still needs to be there so most items would have to have multiple barcodes – rather messy and takes up more space on the package.
The product UPC codes scanned at the point of sale haven’t really changed in the 45 years since the concept was introduced.

Wouldn’t it be great if, rather than have multiple barcodes on a package, a single one could contain the UPC data, weblink for customer engagement? Maybe we can!

Last year GS1 our favorite standards organization came out with a new concept: GS1 Digital Link.

While the name might not be too exciting, Digital Link has the potential to revolutionize how barcoding is used, to add true customer engagement and to (yes really) provide item-level serialization and traceability.
For primary packaging (what we would buy in a store), GS1’s barcoding is built around the concept of the Global Trade Item Number – GTIN. This is what is encoded in the common UPC barcode that is scanned at the checkout.
The GTIN in the item barcode basically consists of a company prefix and an SKU or stock keeping unit number. The GTIN identifies a type of product – a 12oz can of Pepsi Cola or an 8 oz bag of salt n vinegar Lay’s chips for example. Every item sold at retail and many other products that use the GS1 system (such as pharmaceutical or medical products) has a GTIN.
It is important to note that a GTIN doesn’t identify an individual item – every 12oz can of Pepsi will have the same GTIN.
Also, no additional data can be encoded in the product barcode – only the 12 digit UPC in the US or 13 digit EAN code internationally. This is why additional barcodes must currently be added to a package in the event a brand owner wants to encode more data.
Traditionally, barcodes in the GS1 system have been used in the supply chain from manufacturer to point of sale. They lose their usefulness once the product has been sold. GS1 Digital Link promises to extend the reach of the GS1 system all the way from the manufacturer to consumer and to provide a means of interaction between the brand owner and the consumer.

So how does it work?

For the first time, GS1 is allowing a 2D QR barcode to be used as the barcode for point of sale.
Encoded within the barcode is a URI (unique resource identifier – an example of which is the familiar website URLs we use every day) and a number of other possible data fields that include:
GTIN
Lot number
Serial number
The expiration date and many more
Some examples:
Note, the examples use the domain id.gs1.org, but brand owners can use their own domains.
Customer Engagement and More – GS1 Digital Link
Customer Engagement and More – GS1 Digital Link
An interesting addition to the new specification is that the data fields can be identified by either using the familiar GS1 Application Identifiers (AI) or by text identifiers. Note that this is only a quick intro, so check out the GS1 Digital Link specification to get complete information.
  The ability to include all this data in one barcode means that only one barcode needs to be printed on the package and it can be used for point of sale, traceability, anti-counterfeit and for customer engagement by sending a consumer who scans the code to an interactive website.
GS1 Digital Link could prove to be the biggest revolution in barcoding since the first code was scanned in a store 45 years ago.

When will this start?

It is going to take a while and we can expect to see both traditional UPC codes and the new QR codes used side by side until the infrastructure is in place to handle the new 2D barcodes.
 A survey carried out by the food marketing institute found that in the US nearly 40% of POS scanners are capable of reading 2D codes today and that will increase to about 55% by 2022.
The POS systems to handle the data are running somewhat behind, with an estimated 20% of systems being able to handle this data.
There is clearly a ways to go.
In the same survey, stakeholders saw the advantages of switching to data-rich solutions such as follows:
60% stated better inventory accuracy
40% stated better customer engagement
36% stated anti-counterfeit
35% stated improved recall control
33% stated expiration date control
* Yes, people could choose more than one.
Finally, 85% of stakeholders see 3-5 years to get a higher data density solution to the current UPC established.
So there is certainly a lot of interest in GS1 Digital Link. While I’ve discussed the use of QR codes in this podcast, other data carriers that could be used (and be very interesting) are NFC RFID tags and the Digimarc system that turns the complete package into the barcode. Digimarc will be the topic of a future podcast.
Should be interesting days ahead.
How can we help you meet your objectives for your labeling and barcode operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/08/customer-engagement-and-more-gs1-digital-link/ [syndication_item_hash] => 1e5148b5aacb103170db86cec5f4b5cf )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Customer Engagement and More – GS1 Digital Link

Array ( [post_title] => Customer Engagement and More – GS1 Digital Link [post_content] =>

Customer Engagement and More – GS1 Digital Link

Using barcodes on packages for customer engagement? This idea is certainly not new – here is a link to a Packaging World article on this very topic from 2011.

The article specifically mentioned that QR codes would provide the ability to download coupons, enter contests, play games, and other fun activities – all powered by those little barcodes.

This all seemed quite exciting, but QR codes got old quickly and the concept seemed to fade away.

Fast forward to today and there is renewed interest in using packaging to actively engage with customers.

Customer Engagement and More – GS1 Digital Link

Listen to our GS1 Digital Link Podcast

Traditional ways to communicate to customers such as TV and print advertising are not performing as well as In the past.  These are also a one-way form of communication, yelling a message at consumers – no wonder they don’t work as well as in the past. In addition, engagement on a brand’s social media pages is in decline as well. What is a marketer to do?

As a result of all this, brand owners have a renewed interest trying to set up a direct connection to their customers based on the product packaging – the package is potentially the ultimate marketing tool.
Enter smart packaging – a means to allow brands to connect directly with their customers. Generally, a smart package will allow the customer to scan a barcode (yes, usually a QR Code) and be connected to an interactive website.

So QR codes are back – a lot of brands are using them – some quite creatively

Currently, there isn’t a standard to use QR codes  (or any type of barcode) for customer engagement so brands are tending to encode them in different ways – often just a URL, sometimes other data.
Of course, the package’s UPC  barcode still needs to be there so most items would have to have multiple barcodes – rather messy and takes up more space on the package.
The product UPC codes scanned at the point of sale haven’t really changed in the 45 years since the concept was introduced.

Wouldn’t it be great if, rather than have multiple barcodes on a package, a single one could contain the UPC data, weblink for customer engagement? Maybe we can!

Last year GS1 our favorite standards organization came out with a new concept: GS1 Digital Link.

While the name might not be too exciting, Digital Link has the potential to revolutionize how barcoding is used, to add true customer engagement and to (yes really) provide item-level serialization and traceability.
For primary packaging (what we would buy in a store), GS1’s barcoding is built around the concept of the Global Trade Item Number – GTIN. This is what is encoded in the common UPC barcode that is scanned at the checkout.
The GTIN in the item barcode basically consists of a company prefix and an SKU or stock keeping unit number. The GTIN identifies a type of product – a 12oz can of Pepsi Cola or an 8 oz bag of salt n vinegar Lay’s chips for example. Every item sold at retail and many other products that use the GS1 system (such as pharmaceutical or medical products) has a GTIN.
It is important to note that a GTIN doesn’t identify an individual item – every 12oz can of Pepsi will have the same GTIN.
Also, no additional data can be encoded in the product barcode – only the 12 digit UPC in the US or 13 digit EAN code internationally. This is why additional barcodes must currently be added to a package in the event a brand owner wants to encode more data.
Traditionally, barcodes in the GS1 system have been used in the supply chain from manufacturer to point of sale. They lose their usefulness once the product has been sold. GS1 Digital Link promises to extend the reach of the GS1 system all the way from the manufacturer to consumer and to provide a means of interaction between the brand owner and the consumer.

So how does it work?

For the first time, GS1 is allowing a 2D QR barcode to be used as the barcode for point of sale.
Encoded within the barcode is a URI (unique resource identifier – an example of which is the familiar website URLs we use every day) and a number of other possible data fields that include:
GTIN
Lot number
Serial number
The expiration date and many more
Some examples:
Note, the examples use the domain id.gs1.org, but brand owners can use their own domains.
Customer Engagement and More – GS1 Digital Link
Customer Engagement and More – GS1 Digital Link
Customer Engagement and More – GS1 Digital Link
An interesting addition to the new specification is that the data fields can be identified by either using the familiar GS1 Application Identifiers (AI) or by text identifiers. Note that this is only a quick intro, so check out the GS1 Digital Link specification to get complete information.
  The ability to include all this data in one barcode means that only one barcode needs to be printed on the package and it can be used for point of sale, traceability, anti-counterfeit and for customer engagement by sending a consumer who scans the code to an interactive website.
GS1 Digital Link could prove to be the biggest revolution in barcoding since the first code was scanned in a store 45 years ago.

When will this start?

It is going to take a while and we can expect to see both traditional UPC codes and the new QR codes used side by side until the infrastructure is in place to handle the new 2D barcodes.
 A survey carried out by the food marketing institute found that in the US nearly 40% of POS scanners are capable of reading 2D codes today and that will increase to about 55% by 2022.
The POS systems to handle the data are running somewhat behind, with an estimated 20% of systems being able to handle this data.
There is clearly a ways to go.
In the same survey, stakeholders saw the advantages of switching to data-rich solutions such as follows:
60% stated better inventory accuracy
40% stated better customer engagement
36% stated anti-counterfeit
35% stated improved recall control
33% stated expiration date control
* Yes, people could choose more than one.
Finally, 85% of stakeholders see 3-5 years to get a higher data density solution to the current UPC established.
So there is certainly a lot of interest in GS1 Digital Link. While I’ve discussed the use of QR codes in this podcast, other data carriers that could be used (and be very interesting) are NFC RFID tags and the Digimarc system that turns the complete package into the barcode. Digimarc will be the topic of a future podcast.
Should be interesting days ahead.
How can we help you meet your objectives for your labeling and barcode operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!
[post_excerpt] => Using barcodes on packages for customer engagement? This idea is certainly not new – here is a link to a Packaging World article on this very topic from 2011. The article specifically mentioned that QR codes would provide the ability to download coupons, enter contests, play games, and other fun activities – all powered by […] [post_date_gmt] => 2019-08-05 18:10:41 [post_date] => 2019-08-05 18:10:41 [post_modified_gmt] => 2019-08-05 18:10:41 [post_modified] => 2019-08-05 18:10:41 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5952 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/08/customer-engagement-and-more-gs1-digital-link/ [syndication_item_hash] => 1e5148b5aacb103170db86cec5f4b5cf [faf_featured_image] => 0 [faf_process_image] => 0,0,0,0,0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

End of Parts & Service – SATO Printers

Array ( [post_title] => End of Parts & Service – SATO Printers [post_content] =>

As companies improve their products and introduce new models, earlier generations are discontinued and eventually can no longer be supported.

I recently received a reminder from SATO that some of their legacy models have reached the end of their service/support period.

Included are the following models:

SATO EOS

 

You can see the original SATO end of service notice here: SATO EOS Doc

Most users of these printers have already upgraded to current models, but if you happen to still be using any of these models, please note that by the end of August, service will end and spare parts will be limited until the end of the year, after which they can’t be ordered.

What Should You Do?

If you do use any of these discontinued printers, it is best to upgrade to a new  SATO CLNX printer. The new model has a lot of advantages and is designed to be a simple replacement for older printers. SATO also has a special trade-in program for the legacy printers that you can take advantage of. ID Technology can help you with every step of this process.

Want to Get Started?

Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with one of our labeling experts, right in your area.

[post_excerpt] => As companies improve their products and introduce new models, earlier generations are discontinued and eventually can no longer be supported. I recently received a reminder from SATO that some of their legacy models have reached the end of their service/support period. Included are the following models:   You can see the original SATO end of […] [post_date_gmt] => 2019-07-08 13:43:26 [post_date] => 2019-07-08 13:43:26 [post_modified_gmt] => 2019-07-08 13:43:26 [post_modified] => 2019-07-08 13:43:26 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5948 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/07/end-of-parts-service-sato-printers/ [syndication_item_hash] => ad8095d3f74bd5de50bcb5355c1f6d3e ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2019/07/SATO-end-support-1.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/07/SATO-end-support-1.jpg

Image exists, checking for same file size

Replacing images : SATO EOS - SATO EOS ON

As companies improve their products and introduce new models, earlier generations are discontinued and eventually can no longer be supported.

I recently received a reminder from SATO that some of their legacy models have reached the end of their service/support period.

Included are the following models:

SATO EOS

 

You can see the original SATO end of service notice here: SATO EOS Doc

Most users of these printers have already upgraded to current models, but if you happen to still be using any of these models, please note that by the end of August, service will end and spare parts will be limited until the end of the year, after which they can’t be ordered.

What Should You Do?

If you do use any of these discontinued printers, it is best to upgrade to a new  SATO CLNX printer. The new model has a lot of advantages and is designed to be a simple replacement for older printers. SATO also has a special trade-in program for the legacy printers that you can take advantage of. ID Technology can help you with every step of this process.

Want to Get Started?

Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with one of our labeling experts, right in your area.

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/07/end-of-parts-service-sato-printers/ [syndication_item_hash] => ad8095d3f74bd5de50bcb5355c1f6d3e )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :End of Parts & Service – SATO Printers

Array ( [post_title] => End of Parts & Service – SATO Printers [post_content] =>

As companies improve their products and introduce new models, earlier generations are discontinued and eventually can no longer be supported.

I recently received a reminder from SATO that some of their legacy models have reached the end of their service/support period.

Included are the following models:

End of Parts & Service – SATO Printers

 

You can see the original SATO end of service notice here: SATO EOS Doc

Most users of these printers have already upgraded to current models, but if you happen to still be using any of these models, please note that by the end of August, service will end and spare parts will be limited until the end of the year, after which they can’t be ordered.

What Should You Do?

If you do use any of these discontinued printers, it is best to upgrade to a new  SATO CLNX printer. The new model has a lot of advantages and is designed to be a simple replacement for older printers. SATO also has a special trade-in program for the legacy printers that you can take advantage of. ID Technology can help you with every step of this process.

Want to Get Started?

Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with one of our labeling experts, right in your area.

[post_excerpt] => As companies improve their products and introduce new models, earlier generations are discontinued and eventually can no longer be supported. I recently received a reminder from SATO that some of their legacy models have reached the end of their service/support period. Included are the following models:   You can see the original SATO end of […] [post_date_gmt] => 2019-07-08 13:43:26 [post_date] => 2019-07-08 13:43:26 [post_modified_gmt] => 2019-07-08 13:43:26 [post_modified] => 2019-07-08 13:43:26 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5948 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/07/end-of-parts-service-sato-printers/ [syndication_item_hash] => ad8095d3f74bd5de50bcb5355c1f6d3e [faf_featured_image] => 0 [faf_process_image] => 0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Podcast – Lasers and Sustainability

Array ( [post_title] => Podcast – Lasers and Sustainability [post_content] =>

The Labeling News PodcastOur most recent podcast covered two topics:

The Loop waste-free packaging concept and how laser coding can help brands meet their sustainability targets.

In this episode I take advantage of a visit to Macsa ID in Barcelona, to chat with Macsa’s CEO Jordi Pinot on the topic of sustainability in packaging and how laser coding can help companies meet their sustainability goals.

Before this, there is a quick update on the Loop circular packaging system. Kroger is now a Loop partner here in the US as well as Walgreens. I’m still somewhat skeptical about this, but it does seem to be making progress.

Loop Waste Free Packaging Concept

On the topic of lasers for coding and marking products, Macsa has a very complete line up of laser systems for just about every application – see more info here: https://www.idtechnology.com/products/coding-solutions/laser-coders/

Laser Coding Can Help Meet Sustainability Targets

In the podcast, we discuss how laser coding allows for permanent prints to be added to all kinds of products. Lasers use no inks or solvents, making them an environmentally friendly way to add date and traceability codes as well as barcodes to many types of packaging materials.

Listen to the podcast here: Labeling News Podcast Episode 5   or search for Labeling News at Apple Podcasts or Spotify.

 

[post_excerpt] => Our most recent podcast covered two topics: The Loop waste-free packaging concept and how laser coding can help brands meet their sustainability targets. In this episode I take advantage of a visit to Macsa ID in Barcelona, to chat with Macsa’s CEO Jordi Pinot on the topic of sustainability in packaging and how laser coding […] [post_date_gmt] => 2019-06-20 12:43:21 [post_date] => 2019-06-20 12:43:21 [post_modified_gmt] => 2019-06-20 12:43:21 [post_modified] => 2019-06-20 12:43:21 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5942 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/06/podcast-lasers-and-sustainability/ [syndication_item_hash] => 0b8ad6117407d36c3ba725c7ac734c57 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2019/04/PodcastThumbblog-150x150.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/04/PodcastThumbblog-150x150.jpg

Image exists, checking for same file size

Replacing images : The Labeling News Podcast - The Labeling News Podcast ON

The Labeling News PodcastOur most recent podcast covered two topics:

The Loop waste-free packaging concept and how laser coding can help brands meet their sustainability targets.

In this episode I take advantage of a visit to Macsa ID in Barcelona, to chat with Macsa’s CEO Jordi Pinot on the topic of sustainability in packaging and how laser coding can help companies meet their sustainability goals.

Before this, there is a quick update on the Loop circular packaging system. Kroger is now a Loop partner here in the US as well as Walgreens. I’m still somewhat skeptical about this, but it does seem to be making progress.

Loop Waste Free Packaging Concept

On the topic of lasers for coding and marking products, Macsa has a very complete line up of laser systems for just about every application – see more info here: https://www.idtechnology.com/products/coding-solutions/laser-coders/

Laser Coding Can Help Meet Sustainability Targets

In the podcast, we discuss how laser coding allows for permanent prints to be added to all kinds of products. Lasers use no inks or solvents, making them an environmentally friendly way to add date and traceability codes as well as barcodes to many types of packaging materials.

Listen to the podcast here: Labeling News Podcast Episode 5   or search for Labeling News at Apple Podcasts or Spotify.

 

Local save:http://www.labelingnews.com/wp-content/uploads/2019/06/Loop-Packaging-Concept.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/06/Loop-Packaging-Concept.jpg

Image exists, checking for same file size

Replacing images : - ON

Podcast – Lasers and SustainabilityOur most recent podcast covered two topics:

The Loop waste-free packaging concept and how laser coding can help brands meet their sustainability targets.

In this episode I take advantage of a visit to Macsa ID in Barcelona, to chat with Macsa’s CEO Jordi Pinot on the topic of sustainability in packaging and how laser coding can help companies meet their sustainability goals.

Before this, there is a quick update on the Loop circular packaging system. Kroger is now a Loop partner here in the US as well as Walgreens. I’m still somewhat skeptical about this, but it does seem to be making progress.

Loop Waste Free Packaging Concept

On the topic of lasers for coding and marking products, Macsa has a very complete line up of laser systems for just about every application – see more info here: https://www.idtechnology.com/products/coding-solutions/laser-coders/

Laser Coding Can Help Meet Sustainability Targets

In the podcast, we discuss how laser coding allows for permanent prints to be added to all kinds of products. Lasers use no inks or solvents, making them an environmentally friendly way to add date and traceability codes as well as barcodes to many types of packaging materials.

Listen to the podcast here: Labeling News Podcast Episode 5   or search for Labeling News at Apple Podcasts or Spotify.

 

Local save:http://www.labelingnews.com/wp-content/uploads/2019/06/lasers-sustainabilty.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/06/lasers-sustainabilty.jpg

Image exists, checking for same file size

Replacing images : - ON

Podcast – Lasers and SustainabilityOur most recent podcast covered two topics:

The Loop waste-free packaging concept and how laser coding can help brands meet their sustainability targets.

In this episode I take advantage of a visit to Macsa ID in Barcelona, to chat with Macsa’s CEO Jordi Pinot on the topic of sustainability in packaging and how laser coding can help companies meet their sustainability goals.

Before this, there is a quick update on the Loop circular packaging system. Kroger is now a Loop partner here in the US as well as Walgreens. I’m still somewhat skeptical about this, but it does seem to be making progress.

Podcast – Lasers and Sustainability

Loop Waste Free Packaging Concept

On the topic of lasers for coding and marking products, Macsa has a very complete line up of laser systems for just about every application – see more info here: https://www.idtechnology.com/products/coding-solutions/laser-coders/

Laser Coding Can Help Meet Sustainability Targets

In the podcast, we discuss how laser coding allows for permanent prints to be added to all kinds of products. Lasers use no inks or solvents, making them an environmentally friendly way to add date and traceability codes as well as barcodes to many types of packaging materials.

Listen to the podcast here: Labeling News Podcast Episode 5   or search for Labeling News at Apple Podcasts or Spotify.

 

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/06/podcast-lasers-and-sustainability/ [syndication_item_hash] => 0b8ad6117407d36c3ba725c7ac734c57 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Podcast – Lasers and Sustainability

Array ( [post_title] => Podcast – Lasers and Sustainability [post_content] =>

Podcast – Lasers and SustainabilityOur most recent podcast covered two topics:

The Loop waste-free packaging concept and how laser coding can help brands meet their sustainability targets.

In this episode I take advantage of a visit to Macsa ID in Barcelona, to chat with Macsa’s CEO Jordi Pinot on the topic of sustainability in packaging and how laser coding can help companies meet their sustainability goals.

Before this, there is a quick update on the Loop circular packaging system. Kroger is now a Loop partner here in the US as well as Walgreens. I’m still somewhat skeptical about this, but it does seem to be making progress.

Podcast – Lasers and Sustainability

Loop Waste Free Packaging Concept

On the topic of lasers for coding and marking products, Macsa has a very complete line up of laser systems for just about every application – see more info here: https://www.idtechnology.com/products/coding-solutions/laser-coders/

Podcast – Lasers and Sustainability

Laser Coding Can Help Meet Sustainability Targets

In the podcast, we discuss how laser coding allows for permanent prints to be added to all kinds of products. Lasers use no inks or solvents, making them an environmentally friendly way to add date and traceability codes as well as barcodes to many types of packaging materials.

Listen to the podcast here: Labeling News Podcast Episode 5   or search for Labeling News at Apple Podcasts or Spotify.

 

[post_excerpt] => Our most recent podcast covered two topics: The Loop waste-free packaging concept and how laser coding can help brands meet their sustainability targets. In this episode I take advantage of a visit to Macsa ID in Barcelona, to chat with Macsa’s CEO Jordi Pinot on the topic of sustainability in packaging and how laser coding […] [post_date_gmt] => 2019-06-20 12:43:21 [post_date] => 2019-06-20 12:43:21 [post_modified_gmt] => 2019-06-20 12:43:21 [post_modified] => 2019-06-20 12:43:21 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5942 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/06/podcast-lasers-and-sustainability/ [syndication_item_hash] => 0b8ad6117407d36c3ba725c7ac734c57 [faf_featured_image] => 0 [faf_process_image] => 0,0,0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Product Handling Considerations for Barcoding on Shipping Cases

Array ( [post_title] => Product Handling Considerations for Barcoding on Shipping Cases [post_content] =>

Using inkjet printers to add variable information to shipping cases, is increasing in popularity. Using this technique can dramatically reduce the number of pre-printed items that need to be managed and fit into company efforts to increase digitalization and move to a lean workflow.

Here at ID Technology, we have a lot of experience when it comes to installing inkjet systems for printing barcodes, text and graphics onto corrugated cases. We are a founding distributor of the FoxJet ProSeries system and have won the prestigious Regency Award for top FoxJet distributor for 14 consecutive years.

If there is one thing we’ve learned over this time, it’s that having good product handling is as important as having good printing equipment for getting the high-quality, compliant GS1 barcodes that customers demand. If the boxes are not presented consistently and accurately to the printheads, this will show in poor print quality and in particular will not allow high-quality barcodes to be printed.

To help educate users on best practices for product handling, our friends at FoxJet recently produced a detailed whitepaper on this topic that goes over many of the issues that are important to ensure great quality printing every time.

FoxJet ProSeries Printers

The whitepaper the transition from the case taper or sealer to the conveyor where the barcode printers are installed as being an area of crucial importance. Because space is often limited on packaging lines, the printheads often have to be installed very close to the exit of the case sealer. Some important factors are:

Carton Control – Proximity to the Printhead

It is important that after leaving the case sealer, the boxes are correctly presented the correct distance from the printheads. The drops of ink that are fired from the printheads can only travel a short distance while maintaining accuracy. If the box is too far away, print quality will decline and if so close it hits the printhead, damage might occur.

Be sure to control the boxes gently so that the boxes are undamaged as they pass through your packaging processes.

It’s best to use guide rails to accurately control the position of the box and even better use in conjunction with FoxJet’s retracting printhead brackets. This bracket uses a roller allow the printhead to be the correct distance from the box every time.

Product/Conveyor Speed

Ensure that boxes leaving your case sealer are traveling at a speed that is within the limits of your inkjet printer. Our FoxJet ProSeries printheads are able to print high-quality text, barcodes and images at up to 300ft per minute, which is enough for all but the fastest production lines.

Angel Hair

No, we are not talking pasta here! Some case sealing machines use hot melt adhesive to hold the flaps on the boxes closed. At times the adhesive applicators can leave a stringy residue behind that can get stuck to the printheads and block the tiny nozzles. Dust from the corrugated boxes can be bad too – be sure to regularly clean your packaging equipment and the printheads.

Vibrations

Good quality printing depends on the boxes being transferred smoothly past the printheads. Make sure your conveyor belt runs smoothly and that you are not dropping boxes onto the conveyor where the printheads are mounted. We’ve seen this happen and the results are not always pretty!

Best Practice of All

The best way to get the best labeling or coding for your shipping cases is to connect with your local ID Technology representative. With many years of experience, combined with the case packing, sealing and product handling of ProMach, we are able to help you determine the best solution for all your case coding or labeling needs.

How can ID Technology and ProMach help you meet your objectives for your packaging barcode and coding operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

[post_excerpt] => Using inkjet printers to add variable information to shipping cases, is increasing in popularity. Using this technique can dramatically reduce the number of pre-printed items that need to be managed and fit into company efforts to increase digitalization and move to a lean workflow. Here at ID Technology, we have a lot of experience when […] [post_date_gmt] => 2019-06-18 21:03:04 [post_date] => 2019-06-18 21:03:04 [post_modified_gmt] => 2019-06-18 21:03:04 [post_modified] => 2019-06-18 21:03:04 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5937 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/06/product-handling-considerations-for-barcoding-on-shipping-cases/ [syndication_item_hash] => 380c6e3d4f6ebf63ea44ce5e8d7bf988 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2019/06/warehouse-pallets.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/06/warehouse-pallets.jpg

Image exists, checking for same file size

Replacing images : - ON

Using inkjet printers to add variable information to shipping cases, is increasing in popularity. Using this technique can dramatically reduce the number of pre-printed items that need to be managed and fit into company efforts to increase digitalization and move to a lean workflow.

Here at ID Technology, we have a lot of experience when it comes to installing inkjet systems for printing barcodes, text and graphics onto corrugated cases. We are a founding distributor of the FoxJet ProSeries system and have won the prestigious Regency Award for top FoxJet distributor for 14 consecutive years.

If there is one thing we’ve learned over this time, it’s that having good product handling is as important as having good printing equipment for getting the high-quality, compliant GS1 barcodes that customers demand. If the boxes are not presented consistently and accurately to the printheads, this will show in poor print quality and in particular will not allow high-quality barcodes to be printed.

To help educate users on best practices for product handling, our friends at FoxJet recently produced a detailed whitepaper on this topic that goes over many of the issues that are important to ensure great quality printing every time.

FoxJet ProSeries Printers

The whitepaper the transition from the case taper or sealer to the conveyor where the barcode printers are installed as being an area of crucial importance. Because space is often limited on packaging lines, the printheads often have to be installed very close to the exit of the case sealer. Some important factors are:

Carton Control – Proximity to the Printhead

It is important that after leaving the case sealer, the boxes are correctly presented the correct distance from the printheads. The drops of ink that are fired from the printheads can only travel a short distance while maintaining accuracy. If the box is too far away, print quality will decline and if so close it hits the printhead, damage might occur.

Be sure to control the boxes gently so that the boxes are undamaged as they pass through your packaging processes.

It’s best to use guide rails to accurately control the position of the box and even better use in conjunction with FoxJet’s retracting printhead brackets. This bracket uses a roller allow the printhead to be the correct distance from the box every time.

Product/Conveyor Speed

Ensure that boxes leaving your case sealer are traveling at a speed that is within the limits of your inkjet printer. Our FoxJet ProSeries printheads are able to print high-quality text, barcodes and images at up to 300ft per minute, which is enough for all but the fastest production lines.

Angel Hair

No, we are not talking pasta here! Some case sealing machines use hot melt adhesive to hold the flaps on the boxes closed. At times the adhesive applicators can leave a stringy residue behind that can get stuck to the printheads and block the tiny nozzles. Dust from the corrugated boxes can be bad too – be sure to regularly clean your packaging equipment and the printheads.

Vibrations

Good quality printing depends on the boxes being transferred smoothly past the printheads. Make sure your conveyor belt runs smoothly and that you are not dropping boxes onto the conveyor where the printheads are mounted. We’ve seen this happen and the results are not always pretty!

Best Practice of All

The best way to get the best labeling or coding for your shipping cases is to connect with your local ID Technology representative. With many years of experience, combined with the case packing, sealing and product handling of ProMach, we are able to help you determine the best solution for all your case coding or labeling needs.

How can ID Technology and ProMach help you meet your objectives for your packaging barcode and coding operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

Local save:http://www.labelingnews.com/wp-content/uploads/2019/06/FJ-WP.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/06/FJ-WP.jpg

Image exists, checking for same file size

Replacing images : - ON

Product Handling Considerations for Barcoding on Shipping CasesUsing inkjet printers to add variable information to shipping cases, is increasing in popularity. Using this technique can dramatically reduce the number of pre-printed items that need to be managed and fit into company efforts to increase digitalization and move to a lean workflow.

Here at ID Technology, we have a lot of experience when it comes to installing inkjet systems for printing barcodes, text and graphics onto corrugated cases. We are a founding distributor of the FoxJet ProSeries system and have won the prestigious Regency Award for top FoxJet distributor for 14 consecutive years.

If there is one thing we’ve learned over this time, it’s that having good product handling is as important as having good printing equipment for getting the high-quality, compliant GS1 barcodes that customers demand. If the boxes are not presented consistently and accurately to the printheads, this will show in poor print quality and in particular will not allow high-quality barcodes to be printed.

To help educate users on best practices for product handling, our friends at FoxJet recently produced a detailed whitepaper on this topic that goes over many of the issues that are important to ensure great quality printing every time.

FoxJet ProSeries Printers

The whitepaper the transition from the case taper or sealer to the conveyor where the barcode printers are installed as being an area of crucial importance. Because space is often limited on packaging lines, the printheads often have to be installed very close to the exit of the case sealer. Some important factors are:

Carton Control – Proximity to the Printhead

It is important that after leaving the case sealer, the boxes are correctly presented the correct distance from the printheads. The drops of ink that are fired from the printheads can only travel a short distance while maintaining accuracy. If the box is too far away, print quality will decline and if so close it hits the printhead, damage might occur.

Be sure to control the boxes gently so that the boxes are undamaged as they pass through your packaging processes.

It’s best to use guide rails to accurately control the position of the box and even better use in conjunction with FoxJet’s retracting printhead brackets. This bracket uses a roller allow the printhead to be the correct distance from the box every time.

Product/Conveyor Speed

Ensure that boxes leaving your case sealer are traveling at a speed that is within the limits of your inkjet printer. Our FoxJet ProSeries printheads are able to print high-quality text, barcodes and images at up to 300ft per minute, which is enough for all but the fastest production lines.

Angel Hair

No, we are not talking pasta here! Some case sealing machines use hot melt adhesive to hold the flaps on the boxes closed. At times the adhesive applicators can leave a stringy residue behind that can get stuck to the printheads and block the tiny nozzles. Dust from the corrugated boxes can be bad too – be sure to regularly clean your packaging equipment and the printheads.

Vibrations

Good quality printing depends on the boxes being transferred smoothly past the printheads. Make sure your conveyor belt runs smoothly and that you are not dropping boxes onto the conveyor where the printheads are mounted. We’ve seen this happen and the results are not always pretty!

Best Practice of All

The best way to get the best labeling or coding for your shipping cases is to connect with your local ID Technology representative. With many years of experience, combined with the case packing, sealing and product handling of ProMach, we are able to help you determine the best solution for all your case coding or labeling needs.

How can ID Technology and ProMach help you meet your objectives for your packaging barcode and coding operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

Local save:http://www.labelingnews.com/wp-content/uploads/2019/06/proseries.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/06/proseries.jpg

Image exists, checking for same file size

Replacing images : - ON

Product Handling Considerations for Barcoding on Shipping CasesUsing inkjet printers to add variable information to shipping cases, is increasing in popularity. Using this technique can dramatically reduce the number of pre-printed items that need to be managed and fit into company efforts to increase digitalization and move to a lean workflow.

Here at ID Technology, we have a lot of experience when it comes to installing inkjet systems for printing barcodes, text and graphics onto corrugated cases. We are a founding distributor of the Product Handling Considerations for Barcoding on Shipping CasesFoxJet ProSeries system and have won the prestigious Regency Award for top FoxJet distributor for 14 consecutive years.

If there is one thing we’ve learned over this time, it’s that having good product handling is as important as having good printing equipment for getting the high-quality, compliant GS1 barcodes that customers demand. If the boxes are not presented consistently and accurately to the printheads, this will show in poor print quality and in particular will not allow high-quality barcodes to be printed.

To help educate users on best practices for product handling, our friends at FoxJet recently produced a detailed whitepaper on this topic that goes over many of the issues that are important to ensure great quality printing every time.

FoxJet ProSeries Printers

The whitepaper the transition from the case taper or sealer to the conveyor where the barcode printers are installed as being an area of crucial importance. Because space is often limited on packaging lines, the printheads often have to be installed very close to the exit of the case sealer. Some important factors are:

Carton Control – Proximity to the Printhead

It is important that after leaving the case sealer, the boxes are correctly presented the correct distance from the printheads. The drops of ink that are fired from the printheads can only travel a short distance while maintaining accuracy. If the box is too far away, print quality will decline and if so close it hits the printhead, damage might occur.

Be sure to control the boxes gently so that the boxes are undamaged as they pass through your packaging processes.

It’s best to use guide rails to accurately control the position of the box and even better use in conjunction with FoxJet’s retracting printhead brackets. This bracket uses a roller allow the printhead to be the correct distance from the box every time.

Product/Conveyor Speed

Ensure that boxes leaving your case sealer are traveling at a speed that is within the limits of your inkjet printer. Our FoxJet ProSeries printheads are able to print high-quality text, barcodes and images at up to 300ft per minute, which is enough for all but the fastest production lines.

Angel Hair

No, we are not talking pasta here! Some case sealing machines use hot melt adhesive to hold the flaps on the boxes closed. At times the adhesive applicators can leave a stringy residue behind that can get stuck to the printheads and block the tiny nozzles. Dust from the corrugated boxes can be bad too – be sure to regularly clean your packaging equipment and the printheads.

Vibrations

Good quality printing depends on the boxes being transferred smoothly past the printheads. Make sure your conveyor belt runs smoothly and that you are not dropping boxes onto the conveyor where the printheads are mounted. We’ve seen this happen and the results are not always pretty!

Best Practice of All

The best way to get the best labeling or coding for your shipping cases is to connect with your local ID Technology representative. With many years of experience, combined with the case packing, sealing and product handling of ProMach, we are able to help you determine the best solution for all your case coding or labeling needs.

How can ID Technology and ProMach help you meet your objectives for your packaging barcode and coding operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/06/product-handling-considerations-for-barcoding-on-shipping-cases/ [syndication_item_hash] => 380c6e3d4f6ebf63ea44ce5e8d7bf988 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Product Handling Considerations for Barcoding on Shipping Cases

Array ( [post_title] => Product Handling Considerations for Barcoding on Shipping Cases [post_content] =>

Product Handling Considerations for Barcoding on Shipping CasesUsing inkjet printers to add variable information to shipping cases, is increasing in popularity. Using this technique can dramatically reduce the number of pre-printed items that need to be managed and fit into company efforts to increase digitalization and move to a lean workflow.

Here at ID Technology, we have a lot of experience when it comes to installing inkjet systems for printing barcodes, text and graphics onto corrugated cases. We are a founding distributor of the Product Handling Considerations for Barcoding on Shipping CasesFoxJet ProSeries system and have won the prestigious Regency Award for top FoxJet distributor for 14 consecutive years.

If there is one thing we’ve learned over this time, it’s that having good product handling is as important as having good printing equipment for getting the high-quality, compliant GS1 barcodes that customers demand. If the boxes are not presented consistently and accurately to the printheads, this will show in poor print quality and in particular will not allow high-quality barcodes to be printed.

To help educate users on best practices for product handling, our friends at FoxJet recently produced a detailed whitepaper on this topic that goes over many of the issues that are important to ensure great quality printing every time.

Product Handling Considerations for Barcoding on Shipping Cases

FoxJet ProSeries Printers

The whitepaper the transition from the case taper or sealer to the conveyor where the barcode printers are installed as being an area of crucial importance. Because space is often limited on packaging lines, the printheads often have to be installed very close to the exit of the case sealer. Some important factors are:

Carton Control – Proximity to the Printhead

It is important that after leaving the case sealer, the boxes are correctly presented the correct distance from the printheads. The drops of ink that are fired from the printheads can only travel a short distance while maintaining accuracy. If the box is too far away, print quality will decline and if so close it hits the printhead, damage might occur.

Be sure to control the boxes gently so that the boxes are undamaged as they pass through your packaging processes.

It’s best to use guide rails to accurately control the position of the box and even better use in conjunction with FoxJet’s retracting printhead brackets. This bracket uses a roller allow the printhead to be the correct distance from the box every time.

Product/Conveyor Speed

Ensure that boxes leaving your case sealer are traveling at a speed that is within the limits of your inkjet printer. Our FoxJet ProSeries printheads are able to print high-quality text, barcodes and images at up to 300ft per minute, which is enough for all but the fastest production lines.

Angel Hair

No, we are not talking pasta here! Some case sealing machines use hot melt adhesive to hold the flaps on the boxes closed. At times the adhesive applicators can leave a stringy residue behind that can get stuck to the printheads and block the tiny nozzles. Dust from the corrugated boxes can be bad too – be sure to regularly clean your packaging equipment and the printheads.

Vibrations

Good quality printing depends on the boxes being transferred smoothly past the printheads. Make sure your conveyor belt runs smoothly and that you are not dropping boxes onto the conveyor where the printheads are mounted. We’ve seen this happen and the results are not always pretty!

Best Practice of All

The best way to get the best labeling or coding for your shipping cases is to connect with your local ID Technology representative. With many years of experience, combined with the case packing, sealing and product handling of ProMach, we are able to help you determine the best solution for all your case coding or labeling needs.

How can ID Technology and ProMach help you meet your objectives for your packaging barcode and coding operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

[post_excerpt] => Using inkjet printers to add variable information to shipping cases, is increasing in popularity. Using this technique can dramatically reduce the number of pre-printed items that need to be managed and fit into company efforts to increase digitalization and move to a lean workflow. Here at ID Technology, we have a lot of experience when […] [post_date_gmt] => 2019-06-18 21:03:04 [post_date] => 2019-06-18 21:03:04 [post_modified_gmt] => 2019-06-18 21:03:04 [post_modified] => 2019-06-18 21:03:04 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.labelingnews.com/?p=5937 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/06/product-handling-considerations-for-barcoding-on-shipping-cases/ [syndication_item_hash] => 380c6e3d4f6ebf63ea44ce5e8d7bf988 [faf_featured_image] => 0 [faf_process_image] => 0,0,0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 1625 ) [post_format] => Array ( ) ) )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedlink.class.php on line 302

Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedlink.class.php on line 302

FAF deciding on filters on post to be syndicated:

Cannabis Labels

Array ( [post_title] => Cannabis Labels [post_content] =>

 

In 1996 California became the first state to legalize medical cannabis. This sparked a trend that spread throughout most of the United States since. As more states are legalize the medical cannabis market has grown more then 310% globally within the past 4-5 years.

In 2012, Colorado and Washington became the first states to legalize cannabis for recreational use. Since then, other states have joined them, including Whitlam Groups home state of Michigan.

In 2019 the cannabis packaging market in the US was valued at $101.48 billion. By 2025 this market is expected to reach $297.51 billion. This is a 22.59% growth rate within a 6-year period.

As the medical and recreational cannabis markets grow rapidly it is necessary to have suitable packaging for your cannabis products. Due to various government regulations across the globe, the packaging of cannabis is of the upmost importance. Let’s look at some of the design and packaging trends within the cannabis market.

Green Packaging

One trend that we have noticed to be popular within the cannabis market is green packaging. Green packaging uses materials that are recyclable, biodegradable, and compostable.

Cannabis is promoted as on all-natural solutions so making sure the packaging is eco-friendly is important to promote an image of environmental consciousness. Some eco-friendly solutions include

Compliance Needs              

Making sure your packaging has shelf-appeal while complying with packaging laws is important when designing the right packaging solutions. While creative design is important for image appeal, complying with regulations and requirements are important for brand-trust.

Before designing your packaging product, it is important to check with your state regulations and other requirements for cannabis. It is important that before starting packaging production you share the regulations and requirements with your packaging manufacture.

Labeling requirements for cannabis products vary in each state, but there are general labeling requirements for all cannabis products. Products with more THC have a more pronounced testing and labeling requirements than products that are more marijuana-based.

One requirement for cannabis labels is that it must include the potency of marijuana and concentrates. This information can be displayed in two ways on a label. One way is to have the font be no smaller than 10-point font, bold, framed, and in a font that is at least two sizes bigger than the other label text. The second way is to have the font be no smaller than 10-point font, bold, framed, and highlighted with a bright noticeable color.

When displaying the percentage levels for cannabinoids on labels it should be shown by range and appear from lowest to highest concentration. All marijuana-infused products must also have a potency statement.

For mor information regarding laws and regulations on labeling and selling of marijuana in Michigan please visit this link: https://www.michigan.gov/lara/0,4601,7-154-89334_79571—,00.html

 Creative Design

 When designing cannabis packaging it is important to first know who your audience will be. The cannabis market is not a one-size-fits-all proposition though. Different demographics find different benefits from THC and CBD. Each consumer group is also split between using for health and wellness or for recreational purposes.

There is also a growing market for dog’s as well. Reports indicate that cannabis products for pets could reach a $1 billion industry by 2022.

It is important to create a design that will appeal to the demographic you want to target. If so you are targeting different demographics it is important to keep your design appealing to all. In order to keep your design sophisticated and appealing here are a few design characteristics to keep in mind:

Users should be able to distinguish between recreational and medicinal cannabis products. It is important to ensure that your design is appealing to consumers as well as having them be able to tell the difference between medicinal and recreational products by the design of the packaging.

Here are some design options that are associated with different demographic groups.

Luxury

A luxury design can be used for an upscale look. This can attract a more mature, discerning demographic. Some design aspects that we see with a luxury look include foil accents, subdued color palettes, simplified shapes, clean lines, and elegant typography.

Natural

This design trends show cases the natural aspect of cannabis products. This design can be used when targeting the more health-conscious demographic. Some ways you can create a natural design in your packaging and labels is by using earthly colors like greens and browns, and also using words/language that have a more natural feel such as “whole”, “raw”, and “organic.” For more information on other natural solutions read above on green packaging.

Minimalist

A minimalist design can give your brand a stylish, contemporary look that is subtle but still communicates the quality of your product. A Minimalist design can be portrayed as boring or plane but there are a few techniques that you can be creative with this type of design that can be very appealing. Making sure to only use 2 or 3 colors and using clean geometric shapes are known to be appealing and eye catching. This design can attract younger and new customers.

Health

Medical cannabis is legal in more states than recreational cannabis is which means there are more opportunity to tap into the medical cannabis market. Taking advantage of the medical aspect of your product by using medical or pharmaceutical symbols and colors can add legitimacy to your business and appeal to medical users. Highlighting the health benefits by adding statements like “pain relief,” or “anti-inflammatory” can also be appealing.

With Whitlam Group’s Marketing and In-House Graphics team we can help you design an outstanding label that appeals to the demographic you are trying to target for your cannabis products. Contact us today for more information and help to get started with your labeling needs.

The post Cannabis Labels appeared first on Whitlam Group.

[post_excerpt] =>

  In 1996 California became the first state to legalize medical cannabis. This sparked a trend that spread throughout most of the United States since. As more states are legalize the medical cannabis market has grown more then 310% globally …

The post Cannabis Labels appeared first on Whitlam Group.

[post_date_gmt] => 2020-05-05 12:30:12 [post_date] => 2020-05-05 12:30:12 [post_modified_gmt] => 2020-05-05 12:30:12 [post_modified] => 2020-05-05 12:30:12 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9256 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/cannabis-labels/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/cannabis-labels/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/cannabis-labels/ [syndication_item_hash] => d3c19dbc8a0649047ea714dde8fd7f4e ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 252 [1] => 14 ) [post_tag] => Array ( [0] => 1023 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:https://www.whitlam.com/wp-content/uploads/2020/05/cbd-cider.jpg

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/05/cbd-cider.jpg

Image exists, checking for same file size

Replacing images : - ON

 

In 1996 California became the first state to legalize medical cannabis. This sparked a trend that spread throughout most of the United States since. As more states are legalize the medical cannabis market has grown more then 310% globally within the past 4-5 years.

In 2012, Colorado and Washington became the first states to legalize cannabis for recreational use. Since then, other states have joined them, including Whitlam Groups home state of Michigan.

In 2019 the cannabis packaging market in the US was valued at $101.48 billion. By 2025 this market is expected to reach $297.51 billion. This is a 22.59% growth rate within a 6-year period.

As the medical and recreational cannabis markets grow rapidly it is necessary to have suitable packaging for your cannabis products. Due to various government regulations across the globe, the packaging of cannabis is of the upmost importance. Let’s look at some of the design and packaging trends within the cannabis market.

Green Packaging

One trend that we have noticed to be popular within the cannabis market is green packaging. Green packaging uses materials that are recyclable, biodegradable, and compostable.

Cannabis is promoted as on all-natural solutions so making sure the packaging is eco-friendly is important to promote an image of environmental consciousness. Some eco-friendly solutions include

Compliance Needs              

Making sure your packaging has shelf-appeal while complying with packaging laws is important when designing the right packaging solutions. While creative design is important for image appeal, complying with regulations and requirements are important for brand-trust.

Before designing your packaging product, it is important to check with your state regulations and other requirements for cannabis. It is important that before starting packaging production you share the regulations and requirements with your packaging manufacture.

Labeling requirements for cannabis products vary in each state, but there are general labeling requirements for all cannabis products. Products with more THC have a more pronounced testing and labeling requirements than products that are more marijuana-based.

One requirement for cannabis labels is that it must include the potency of marijuana and concentrates. This information can be displayed in two ways on a label. One way is to have the font be no smaller than 10-point font, bold, framed, and in a font that is at least two sizes bigger than the other label text. The second way is to have the font be no smaller than 10-point font, bold, framed, and highlighted with a bright noticeable color.

When displaying the percentage levels for cannabinoids on labels it should be shown by range and appear from lowest to highest concentration. All marijuana-infused products must also have a potency statement.

For mor information regarding laws and regulations on labeling and selling of marijuana in Michigan please visit this link: https://www.michigan.gov/lara/0,4601,7-154-89334_79571—,00.html

 Creative Design

 When designing cannabis packaging it is important to first know who your audience will be. The cannabis market is not a one-size-fits-all proposition though. Different demographics find different benefits from THC and CBD. Each consumer group is also split between using for health and wellness or for recreational purposes.

There is also a growing market for dog’s as well. Reports indicate that cannabis products for pets could reach a $1 billion industry by 2022.

It is important to create a design that will appeal to the demographic you want to target. If so you are targeting different demographics it is important to keep your design appealing to all. In order to keep your design sophisticated and appealing here are a few design characteristics to keep in mind:

Users should be able to distinguish between recreational and medicinal cannabis products. It is important to ensure that your design is appealing to consumers as well as having them be able to tell the difference between medicinal and recreational products by the design of the packaging.

Here are some design options that are associated with different demographic groups.

Luxury

A luxury design can be used for an upscale look. This can attract a more mature, discerning demographic. Some design aspects that we see with a luxury look include foil accents, subdued color palettes, simplified shapes, clean lines, and elegant typography.

Natural

This design trends show cases the natural aspect of cannabis products. This design can be used when targeting the more health-conscious demographic. Some ways you can create a natural design in your packaging and labels is by using earthly colors like greens and browns, and also using words/language that have a more natural feel such as “whole”, “raw”, and “organic.” For more information on other natural solutions read above on green packaging.

Minimalist

A minimalist design can give your brand a stylish, contemporary look that is subtle but still communicates the quality of your product. A Minimalist design can be portrayed as boring or plane but there are a few techniques that you can be creative with this type of design that can be very appealing. Making sure to only use 2 or 3 colors and using clean geometric shapes are known to be appealing and eye catching. This design can attract younger and new customers.

Health

Medical cannabis is legal in more states than recreational cannabis is which means there are more opportunity to tap into the medical cannabis market. Taking advantage of the medical aspect of your product by using medical or pharmaceutical symbols and colors can add legitimacy to your business and appeal to medical users. Highlighting the health benefits by adding statements like “pain relief,” or “anti-inflammatory” can also be appealing.

With Whitlam Group’s Marketing and In-House Graphics team we can help you design an outstanding label that appeals to the demographic you are trying to target for your cannabis products. Contact us today for more information and help to get started with your labeling needs.

The post Cannabis Labels appeared first on Whitlam Group.

Local save:https://www.whitlam.com/wp-content/uploads/2020/05/600mg-CBD-Super-Drops-Sapphire-Essentials-367x367-e1588625341969.jpg

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/05/600mg-CBD-Super-Drops-Sapphire-Essentials-367x367-e1588625341969.jpg

Image exists, checking for same file size

Replacing images : - ON

Cannabis Labels

 

In 1996 California became the first state to legalize medical cannabis. This sparked a trend that spread throughout most of the United States since. As more states are legalize the medical cannabis market has grown more then 310% globally within the past 4-5 years.

In 2012, Colorado and Washington became the first states to legalize cannabis for recreational use. Since then, other states have joined them, including Whitlam Groups home state of Michigan.

In 2019 the cannabis packaging market in the US was valued at $101.48 billion. By 2025 this market is expected to reach $297.51 billion. This is a 22.59% growth rate within a 6-year period.

As the medical and recreational cannabis markets grow rapidly it is necessary to have suitable packaging for your cannabis products. Due to various government regulations across the globe, the packaging of cannabis is of the upmost importance. Let’s look at some of the design and packaging trends within the cannabis market.

Green Packaging

One trend that we have noticed to be popular within the cannabis market is green packaging. Green packaging uses materials that are recyclable, biodegradable, and compostable.

Cannabis is promoted as on all-natural solutions so making sure the packaging is eco-friendly is important to promote an image of environmental consciousness. Some eco-friendly solutions include

Compliance Needs              

Making sure your packaging has shelf-appeal while complying with packaging laws is important when designing the right packaging solutions. While creative design is important for image appeal, complying with regulations and requirements are important for brand-trust.

Before designing your packaging product, it is important to check with your state regulations and other requirements for cannabis. It is important that before starting packaging production you share the regulations and requirements with your packaging manufacture.

Labeling requirements for cannabis products vary in each state, but there are general labeling requirements for all cannabis products. Products with more THC have a more pronounced testing and labeling requirements than products that are more marijuana-based.

One requirement for cannabis labels is that it must include the potency of marijuana and concentrates. This information can be displayed in two ways on a label. One way is to have the font be no smaller than 10-point font, bold, framed, and in a font that is at least two sizes bigger than the other label text. The second way is to have the font be no smaller than 10-point font, bold, framed, and highlighted with a bright noticeable color.

When displaying the percentage levels for cannabinoids on labels it should be shown by range and appear from lowest to highest concentration. All marijuana-infused products must also have a potency statement.

For mor information regarding laws and regulations on labeling and selling of marijuana in Michigan please visit this link: https://www.michigan.gov/lara/0,4601,7-154-89334_79571—,00.html

 Creative Design

 When designing cannabis packaging it is important to first know who your audience will be. The cannabis market is not a one-size-fits-all proposition though. Different demographics find different benefits from THC and CBD. Each consumer group is also split between using for health and wellness or for recreational purposes.

There is also a growing market for dog’s as well. Reports indicate that cannabis products for pets could reach a $1 billion industry by 2022.

It is important to create a design that will appeal to the demographic you want to target. If so you are targeting different demographics it is important to keep your design appealing to all. In order to keep your design sophisticated and appealing here are a few design characteristics to keep in mind:

Users should be able to distinguish between recreational and medicinal cannabis products. It is important to ensure that your design is appealing to consumers as well as having them be able to tell the difference between medicinal and recreational products by the design of the packaging.

Here are some design options that are associated with different demographic groups.

Luxury

A luxury design can be used for an upscale look. This can attract a more mature, discerning demographic. Some design aspects that we see with a luxury look include foil accents, subdued color palettes, simplified shapes, clean lines, and elegant typography.

Natural

This design trends show cases the natural aspect of cannabis products. This design can be used when targeting the more health-conscious demographic. Some ways you can create a natural design in your packaging and labels is by using earthly colors like greens and browns, and also using words/language that have a more natural feel such as “whole”, “raw”, and “organic.” For more information on other natural solutions read above on green packaging.

Minimalist

A minimalist design can give your brand a stylish, contemporary look that is subtle but still communicates the quality of your product. A Minimalist design can be portrayed as boring or plane but there are a few techniques that you can be creative with this type of design that can be very appealing. Making sure to only use 2 or 3 colors and using clean geometric shapes are known to be appealing and eye catching. This design can attract younger and new customers.

Health

Medical cannabis is legal in more states than recreational cannabis is which means there are more opportunity to tap into the medical cannabis market. Taking advantage of the medical aspect of your product by using medical or pharmaceutical symbols and colors can add legitimacy to your business and appeal to medical users. Highlighting the health benefits by adding statements like “pain relief,” or “anti-inflammatory” can also be appealing.

With Whitlam Group’s Marketing and In-House Graphics team we can help you design an outstanding label that appeals to the demographic you are trying to target for your cannabis products. Contact us today for more information and help to get started with your labeling needs.

The post Cannabis Labels appeared first on Whitlam Group.

Local save:https://www.whitlam.com/wp-content/uploads/2020/05/750mg-CBD-Softgels-Curcumin-Sapphire-Essentials-367x367-e1588625292395.png

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/05/750mg-CBD-Softgels-Curcumin-Sapphire-Essentials-367x367-e1588625292395.png

Image exists, checking for same file size

Replacing images : - ON

Cannabis Labels

 

In 1996 California became the first state to legalize medical cannabis. This sparked a trend that spread throughout most of the United States since. As more states are legalize the medical cannabis market has grown more then 310% globally within the past 4-5 years.

Cannabis Labels

In 2012, Colorado and Washington became the first states to legalize cannabis for recreational use. Since then, other states have joined them, including Whitlam Groups home state of Michigan.

In 2019 the cannabis packaging market in the US was valued at $101.48 billion. By 2025 this market is expected to reach $297.51 billion. This is a 22.59% growth rate within a 6-year period.

As the medical and recreational cannabis markets grow rapidly it is necessary to have suitable packaging for your cannabis products. Due to various government regulations across the globe, the packaging of cannabis is of the upmost importance. Let’s look at some of the design and packaging trends within the cannabis market.

Green Packaging

One trend that we have noticed to be popular within the cannabis market is green packaging. Green packaging uses materials that are recyclable, biodegradable, and compostable.

Cannabis is promoted as on all-natural solutions so making sure the packaging is eco-friendly is important to promote an image of environmental consciousness. Some eco-friendly solutions include

Compliance Needs              

Making sure your packaging has shelf-appeal while complying with packaging laws is important when designing the right packaging solutions. While creative design is important for image appeal, complying with regulations and requirements are important for brand-trust.

Before designing your packaging product, it is important to check with your state regulations and other requirements for cannabis. It is important that before starting packaging production you share the regulations and requirements with your packaging manufacture.

Labeling requirements for cannabis products vary in each state, but there are general labeling requirements for all cannabis products. Products with more THC have a more pronounced testing and labeling requirements than products that are more marijuana-based.

One requirement for cannabis labels is that it must include the potency of marijuana and concentrates. This information can be displayed in two ways on a label. One way is to have the font be no smaller than 10-point font, bold, framed, and in a font that is at least two sizes bigger than the other label text. The second way is to have the font be no smaller than 10-point font, bold, framed, and highlighted with a bright noticeable color.

When displaying the percentage levels for cannabinoids on labels it should be shown by range and appear from lowest to highest concentration. All marijuana-infused products must also have a potency statement.

For mor information regarding laws and regulations on labeling and selling of marijuana in Michigan please visit this link: https://www.michigan.gov/lara/0,4601,7-154-89334_79571—,00.html

 Creative Design

 When designing cannabis packaging it is important to first know who your audience will be. The cannabis market is not a one-size-fits-all proposition though. Different demographics find different benefits from THC and CBD. Each consumer group is also split between using for health and wellness or for recreational purposes.

There is also a growing market for dog’s as well. Reports indicate that cannabis products for pets could reach a $1 billion industry by 2022.

It is important to create a design that will appeal to the demographic you want to target. If so you are targeting different demographics it is important to keep your design appealing to all. In order to keep your design sophisticated and appealing here are a few design characteristics to keep in mind:

Users should be able to distinguish between recreational and medicinal cannabis products. It is important to ensure that your design is appealing to consumers as well as having them be able to tell the difference between medicinal and recreational products by the design of the packaging.

Here are some design options that are associated with different demographic groups.

Luxury

A luxury design can be used for an upscale look. This can attract a more mature, discerning demographic. Some design aspects that we see with a luxury look include foil accents, subdued color palettes, simplified shapes, clean lines, and elegant typography.

Natural

This design trends show cases the natural aspect of cannabis products. This design can be used when targeting the more health-conscious demographic. Some ways you can create a natural design in your packaging and labels is by using earthly colors like greens and browns, and also using words/language that have a more natural feel such as “whole”, “raw”, and “organic.” For more information on other natural solutions read above on green packaging.

Minimalist

A minimalist design can give your brand a stylish, contemporary look that is subtle but still communicates the quality of your product. A Minimalist design can be portrayed as boring or plane but there are a few techniques that you can be creative with this type of design that can be very appealing. Making sure to only use 2 or 3 colors and using clean geometric shapes are known to be appealing and eye catching. This design can attract younger and new customers.

Health

Medical cannabis is legal in more states than recreational cannabis is which means there are more opportunity to tap into the medical cannabis market. Taking advantage of the medical aspect of your product by using medical or pharmaceutical symbols and colors can add legitimacy to your business and appeal to medical users. Highlighting the health benefits by adding statements like “pain relief,” or “anti-inflammatory” can also be appealing.

With Whitlam Group’s Marketing and In-House Graphics team we can help you design an outstanding label that appeals to the demographic you are trying to target for your cannabis products. Contact us today for more information and help to get started with your labeling needs.

The post Cannabis Labels appeared first on Whitlam Group.

Local save:https://www.whitlam.com/wp-content/uploads/2020/05/gridiron-gummies-daytime-30count.png

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/05/gridiron-gummies-daytime-30count.png

Image exists, checking for same file size

Replacing images : - ON

Cannabis Labels

 

In 1996 California became the first state to legalize medical cannabis. This sparked a trend that spread throughout most of the United States since. As more states are legalize the medical cannabis market has grown more then 310% globally within the past 4-5 years.

Cannabis Labels

In 2012, Colorado and Washington became the first states to legalize cannabis for recreational use. Since then, other states have joined them, including Whitlam Groups home state of Michigan.

In 2019 the cannabis packaging market in the US was valued at $101.48 billion. By 2025 this market is expected to reach $297.51 billion. This is a 22.59% growth rate within a 6-year period.

As the medical and recreational cannabis markets grow rapidly it is necessary to have suitable packaging for your cannabis products. Due to various government regulations across the globe, the packaging of cannabis is of the upmost importance. Let’s look at some of the design and packaging trends within the cannabis market.

Green Packaging

One trend that we have noticed to be popular within the cannabis market is green packaging. Green packaging uses materials that are recyclable, biodegradable, and compostable.

Cannabis is promoted as on all-natural solutions so making sure the packaging is eco-friendly is important to promote an image of environmental consciousness. Some eco-friendly solutions include

Compliance Needs              

Making sure your packaging has shelf-appeal while complying with packaging laws is important when designing the right packaging solutions. While creative design is important for image appeal, complying with regulations and requirements are important for brand-trust.

Before designing your packaging product, it is important to check with your state regulations and other requirements for cannabis. It is important that before starting packaging production you share the regulations and requirements with your packaging manufacture.

Labeling requirements for cannabis products vary in each state, but there are general labeling requirements for all cannabis products. Products with more THC have a more pronounced testing and labeling requirements than products that are more marijuana-based.

One requirement for cannabis labels is that it must include the potency of marijuana and concentrates. This information can be displayed in two ways on a label. One way is to have the font be no smaller than 10-point font, bold, framed, and in a font that is at least two sizes bigger than the other label text. The second way is to have the font be no smaller than 10-point font, bold, framed, and highlighted with a bright noticeable color.

When displaying the percentage levels for cannabinoids on labels it should be shown by range and appear from lowest to highest concentration. All marijuana-infused products must also have a potency statement.

For mor information regarding laws and regulations on labeling and selling of marijuana in Michigan please visit this link: https://www.michigan.gov/lara/0,4601,7-154-89334_79571—,00.html

 Creative Design

 When designing cannabis packaging it is important to first know who your audience will be. The cannabis market is not a one-size-fits-all proposition though. Different demographics find different benefits from THC and CBD. Each consumer group is also split between using for health and wellness or for recreational purposes.

There is also a growing market for dog’s as well. Reports indicate that cannabis products for pets could reach a $1 billion industry by 2022.

It is important to create a design that will appeal to the demographic you want to target. If so you are targeting different demographics it is important to keep your design appealing to all. In order to keep your design sophisticated and appealing here are a few design characteristics to keep in mind:

Users should be able to distinguish between recreational and medicinal cannabis products. It is important to ensure that your design is appealing to consumers as well as having them be able to tell the difference between medicinal and recreational products by the design of the packaging.

Here are some design options that are associated with different demographic groups.

Luxury

A luxury design can be used for an upscale look. This can attract a more mature, discerning demographic. Some design aspects that we see with a luxury look include foil accents, subdued color palettes, simplified shapes, clean lines, and elegant typography.

Natural

This design trends show cases the natural aspect of cannabis products. This design can be used when targeting the more health-conscious demographic. Some ways you can create a natural design in your packaging and labels is by using earthly colors like greens and browns, and also using words/language that have a more natural feel such as “whole”, “raw”, and “organic.” For more information on other natural solutions read above on green packaging.

Minimalist

A minimalist design can give your brand a stylish, contemporary look that is subtle but still communicates the quality of your product. A Minimalist design can be portrayed as boring or plane but there are a few techniques that you can be creative with this type of design that can be very appealing. Making sure to only use 2 or 3 colors and using clean geometric shapes are known to be appealing and eye catching. This design can attract younger and new customers.

Health

Medical cannabis is legal in more states than recreational cannabis is which means there are more opportunity to tap into the medical cannabis market. Taking advantage of the medical aspect of your product by using medical or pharmaceutical symbols and colors can add legitimacy to your business and appeal to medical users. Highlighting the health benefits by adding statements like “pain relief,” or “anti-inflammatory” can also be appealing.

With Whitlam Group’s Marketing and In-House Graphics team we can help you design an outstanding label that appeals to the demographic you are trying to target for your cannabis products. Contact us today for more information and help to get started with your labeling needs.

The post Cannabis Labels appeared first on Whitlam Group.

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/cannabis-labels/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/cannabis-labels/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/cannabis-labels/ [syndication_item_hash] => d3c19dbc8a0649047ea714dde8fd7f4e )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Cannabis Labels

Array ( [post_title] => Cannabis Labels [post_content] =>

Cannabis Labels

 

In 1996 California became the first state to legalize medical cannabis. This sparked a trend that spread throughout most of the United States since. As more states are legalize the medical cannabis market has grown more then 310% globally within the past 4-5 years.

Cannabis Labels

In 2012, Colorado and Washington became the first states to legalize cannabis for recreational use. Since then, other states have joined them, including Whitlam Groups home state of Michigan.

In 2019 the cannabis packaging market in the US was valued at $101.48 billion. By 2025 this market is expected to reach $297.51 billion. This is a 22.59% growth rate within a 6-year period.

As the medical and recreational cannabis markets grow rapidly it is necessary to have suitable packaging for your cannabis products. Due to various government regulations across the globe, the packaging of cannabis is of the upmost importance. Let’s look at some of the design and packaging trends within the cannabis market.

Green Packaging

One trend that we have noticed to be popular within the cannabis market is green packaging. Green packaging uses materials that are recyclable, biodegradable, and compostable.

Cannabis is promoted as on all-natural solutions so making sure the packaging is eco-friendly is important to promote an image of environmental consciousness. Some eco-friendly solutions include

Compliance Needs              

Making sure your packaging has shelf-appeal while complying with packaging laws is important when designing the right packaging solutions. While creative design is important for image appeal, complying with regulations and requirements are important for brand-trust.

Before designing your packaging product, it is important to check with your state regulations and other requirements for cannabis. It is important that before starting packaging production you share the regulations and requirements with your packaging manufacture.

Labeling requirements for cannabis products vary in each state, but there are general labeling requirements for all cannabis products. Products with more THC have a more pronounced testing and labeling requirements than products that are more marijuana-based.

One requirement for cannabis labels is that it must include the potency of marijuana and concentrates. This information can be displayed in two ways on a label. One way is to have the font be no smaller than 10-point font, bold, framed, and in a font that is at least two sizes bigger than the other label text. The second way is to have the font be no smaller than 10-point font, bold, framed, and highlighted with a bright noticeable color.

When displaying the percentage levels for cannabinoids on labels it should be shown by range and appear from lowest to highest concentration. All marijuana-infused products must also have a potency statement.

For mor information regarding laws and regulations on labeling and selling of marijuana in Michigan please visit this link: https://www.michigan.gov/lara/0,4601,7-154-89334_79571—,00.html

 Creative Design

 When designing cannabis packaging it is important to first know who your audience will be. The cannabis market is not a one-size-fits-all proposition though. Different demographics find different benefits from THC and CBD. Each consumer group is also split between using for health and wellness or for recreational purposes.

There is also a growing market for dog’s as well. Reports indicate that cannabis products for pets could reach a $1 billion industry by 2022.

It is important to create a design that will appeal to the demographic you want to target. If so you are targeting different demographics it is important to keep your design appealing to all. In order to keep your design sophisticated and appealing here are a few design characteristics to keep in mind:

Users should be able to distinguish between recreational and medicinal cannabis products. It is important to ensure that your design is appealing to consumers as well as having them be able to tell the difference between medicinal and recreational products by the design of the packaging.

Here are some design options that are associated with different demographic groups.

Luxury

A luxury design can be used for an upscale look. This can attract a more mature, discerning demographic. Some design aspects that we see with a luxury look include foil accents, subdued color palettes, simplified shapes, clean lines, and elegant typography.

Natural

This design trends show cases the natural aspect of cannabis products. This design can be used when targeting the more health-conscious demographic. Some ways you can create a natural design in your packaging and labels is by using earthly colors like greens and browns, and also using words/language that have a more natural feel such as “whole”, “raw”, and “organic.” For more information on other natural solutions read above on green packaging.

Minimalist Cannabis Labels

A minimalist design can give your brand a stylish, contemporary look that is subtle but still communicates the quality of your product. A Minimalist design can be portrayed as boring or plane but there are a few techniques that you can be creative with this type of design that can be very appealing. Making sure to only use 2 or 3 colors and using clean geometric shapes are known to be appealing and eye catching. This design can attract younger and new customers.

Health

Medical cannabis is legal in more states than recreational cannabis is which means there are more opportunity to tap into the medical cannabis market. Taking advantage of the medical aspect of your product by using medical or pharmaceutical symbols and colors can add legitimacy to your business and appeal to medical users. Highlighting the health benefits by adding statements like “pain relief,” or “anti-inflammatory” can also be appealing.

With Whitlam Group’s Marketing and In-House Graphics team we can help you design an outstanding label that appeals to the demographic you are trying to target for your cannabis products. Contact us today for more information and help to get started with your labeling needs.

The post Cannabis Labels appeared first on Whitlam Group.

[post_excerpt] =>

  In 1996 California became the first state to legalize medical cannabis. This sparked a trend that spread throughout most of the United States since. As more states are legalize the medical cannabis market has grown more then 310% globally …

The post Cannabis Labels appeared first on Whitlam Group.

[post_date_gmt] => 2020-05-05 12:30:12 [post_date] => 2020-05-05 12:30:12 [post_modified_gmt] => 2020-05-05 12:30:12 [post_modified] => 2020-05-05 12:30:12 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9256 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/cannabis-labels/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/cannabis-labels/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/cannabis-labels/ [syndication_item_hash] => d3c19dbc8a0649047ea714dde8fd7f4e [faf_featured_image] => 0 [faf_process_image] => 0,0,0,0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 252 [1] => 14 ) [post_tag] => Array ( [0] => 1023 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Engineered Solutions

Array ( [post_title] => Engineered Solutions [post_content] =>

Whitlam group is an industry leader in complete engineered solutions for complex requirements. With over 50 years of experience in the Automotive industry we have build relationships with many engineers and understand the complexity of OEM requirements.

Our custom engineered solutions simplify industry making and manufacturing process, making them leaner and reducing costs. Whitlam’s goal is to make the tough stuff easy and we are here to help you solve your high-performance labeling challenges with our engineered solutions.

Engineered Solutions

Custom Die-Cut Converting

Our team at Whitlam specializes in design and custom conversions to create a product that meets your needs. Our R&D team and highly skilled engineers can help find the best solution for your application. One solution to replace mechanical fasteners during the application process is by using custom die-cut converting tapes. Some of Whitlam’s converted product solutions include:

Harsh Environment Labels

Harsh environment labels have their own specific requirements custom to each customer. With a wide variety of materials and adhesives, Whitlam can custom engineer each solution to provide long-lasting performance under the harshest of conditions. Some harsh environment conditions include those related to temperature, abrasion, humidity, chemical and UV exposure. Whitlam’s labeling solutions include:

Product Identification and Part Marking

Product Identification is critical for Brand Owners, Design Engineers, Legal Departments, End Users, and many others. Gain control of your supply chain and let Whitlam custom design a solution for your products that need to be individually marked for Product Identification, Part Marking, and Tracking purposes throughout the supply chain.

Functional Components 

Functional die-cut component solutions are custom engineered to your specifications in order to improve assembly operations and reduce contamination, damage and scrap all while generating cost savings. Some Functional Component products options include:

 

Whitlam Group can help you find the right label for your specific application that meet your specific requirements. Contact us today for more information!

The post Engineered Solutions appeared first on Whitlam Group.

[post_excerpt] =>

Whitlam group is an industry leader in complete engineered solutions for complex requirements. With over 50 years of experience in the Automotive industry we have build relationships with many engineers and understand the complexity of OEM requirements. Our custom engineered …

The post Engineered Solutions appeared first on Whitlam Group.

[post_date_gmt] => 2020-03-11 18:32:54 [post_date] => 2020-03-11 18:32:54 [post_modified_gmt] => 2020-03-11 18:32:54 [post_modified] => 2020-03-11 18:32:54 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9228 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/engineered-solutions/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/engineered-solutions/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/engineered-solutions/ [syndication_item_hash] => a51348d72cfbb2e57c2b02c6f0ac1b17 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:https://www.whitlam.com/wp-content/uploads/2020/03/Harsh_enviorment_index_pg.png

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/03/Harsh_enviorment_index_pg.png

Image exists, checking for same file size

Replacing images : - ON

Whitlam group is an industry leader in complete engineered solutions for complex requirements. With over 50 years of experience in the Automotive industry we have build relationships with many engineers and understand the complexity of OEM requirements.

Our custom engineered solutions simplify industry making and manufacturing process, making them leaner and reducing costs. Whitlam’s goal is to make the tough stuff easy and we are here to help you solve your high-performance labeling challenges with our engineered solutions.

Engineered Solutions

Custom Die-Cut Converting

Our team at Whitlam specializes in design and custom conversions to create a product that meets your needs. Our R&D team and highly skilled engineers can help find the best solution for your application. One solution to replace mechanical fasteners during the application process is by using custom die-cut converting tapes. Some of Whitlam’s converted product solutions include:

Harsh Environment Labels

Harsh environment labels have their own specific requirements custom to each customer. With a wide variety of materials and adhesives, Whitlam can custom engineer each solution to provide long-lasting performance under the harshest of conditions. Some harsh environment conditions include those related to temperature, abrasion, humidity, chemical and UV exposure. Whitlam’s labeling solutions include:

Product Identification and Part Marking

Product Identification is critical for Brand Owners, Design Engineers, Legal Departments, End Users, and many others. Gain control of your supply chain and let Whitlam custom design a solution for your products that need to be individually marked for Product Identification, Part Marking, and Tracking purposes throughout the supply chain.

Functional Components 

Functional die-cut component solutions are custom engineered to your specifications in order to improve assembly operations and reduce contamination, damage and scrap all while generating cost savings. Some Functional Component products options include:

 

Whitlam Group can help you find the right label for your specific application that meet your specific requirements. Contact us today for more information!

The post Engineered Solutions appeared first on Whitlam Group.

Local save:https://www.whitlam.com/wp-content/uploads/2020/03/31_13904.jpg

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/03/31_13904.jpg

Image exists, checking for same file size

Replacing images : - ON

Engineered Solutions

Whitlam group is an industry leader in complete engineered solutions for complex requirements. With over 50 years of experience in the Automotive industry we have build relationships with many engineers and understand the complexity of OEM requirements.

Our custom engineered solutions simplify industry making and manufacturing process, making them leaner and reducing costs. Whitlam’s goal is to make the tough stuff easy and we are here to help you solve your high-performance labeling challenges with our engineered solutions.

Engineered Solutions

Custom Die-Cut Converting

Our team at Whitlam specializes in design and custom conversions to create a product that meets your needs. Our R&D team and highly skilled engineers can help find the best solution for your application. One solution to replace mechanical fasteners during the application process is by using custom die-cut converting tapes. Some of Whitlam’s converted product solutions include:

Harsh Environment Labels

Harsh environment labels have their own specific requirements custom to each customer. With a wide variety of materials and adhesives, Whitlam can custom engineer each solution to provide long-lasting performance under the harshest of conditions. Some harsh environment conditions include those related to temperature, abrasion, humidity, chemical and UV exposure. Whitlam’s labeling solutions include:

Product Identification and Part Marking

Product Identification is critical for Brand Owners, Design Engineers, Legal Departments, End Users, and many others. Gain control of your supply chain and let Whitlam custom design a solution for your products that need to be individually marked for Product Identification, Part Marking, and Tracking purposes throughout the supply chain.

Functional Components 

Functional die-cut component solutions are custom engineered to your specifications in order to improve assembly operations and reduce contamination, damage and scrap all while generating cost savings. Some Functional Component products options include:

 

Whitlam Group can help you find the right label for your specific application that meet your specific requirements. Contact us today for more information!

The post Engineered Solutions appeared first on Whitlam Group.

Local save:https://www.whitlam.com/wp-content/uploads/2020/03/Underhood_Image2.jpg

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/03/Underhood_Image2.jpg

Image exists, checking for same file size

Replacing images : - ON

Engineered Solutions

Whitlam group is an industry leader in complete engineered solutions for complex requirements. With over 50 years of experience in the Automotive industry we have build relationships with many engineers and understand the complexity of OEM requirements.

Our custom engineered solutions simplify industry making and manufacturing process, making them leaner and reducing costs. Whitlam’s goal is to make the tough stuff easy and we are here to help you solve your high-performance labeling challenges with our engineered solutions.

Engineered Solutions

Custom Die-Cut Converting Engineered Solutions

Our team at Whitlam specializes in design and custom conversions to create a product that meets your needs. Our R&D team and highly skilled engineers can help find the best solution for your application. One solution to replace mechanical fasteners during the application process is by using custom die-cut converting tapes. Some of Whitlam’s converted product solutions include:

Harsh Environment Labels

Harsh environment labels have their own specific requirements custom to each customer. With a wide variety of materials and adhesives, Whitlam can custom engineer each solution to provide long-lasting performance under the harshest of conditions. Some harsh environment conditions include those related to temperature, abrasion, humidity, chemical and UV exposure. Whitlam’s labeling solutions include:

Product Identification and Part Marking

Product Identification is critical for Brand Owners, Design Engineers, Legal Departments, End Users, and many others. Gain control of your supply chain and let Whitlam custom design a solution for your products that need to be individually marked for Product Identification, Part Marking, and Tracking purposes throughout the supply chain.

Functional Components 

Functional die-cut component solutions are custom engineered to your specifications in order to improve assembly operations and reduce contamination, damage and scrap all while generating cost savings. Some Functional Component products options include:

 

Whitlam Group can help you find the right label for your specific application that meet your specific requirements. Contact us today for more information!

The post Engineered Solutions appeared first on Whitlam Group.

Local save:https://www.whitlam.com/wp-content/uploads/2020/03/AlldiecutsFastPhoto.jpg

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/03/AlldiecutsFastPhoto.jpg

Image exists, checking for same file size

Replacing images : - ON

Engineered Solutions

Whitlam group is an industry leader in complete engineered solutions for complex requirements. With over 50 years of experience in the Automotive industry we have build relationships with many engineers and understand the complexity of OEM requirements.

Our custom engineered solutions simplify industry making and manufacturing process, making them leaner and reducing costs. Whitlam’s goal is to make the tough stuff easy and we are here to help you solve your high-performance labeling challenges with our engineered solutions.

Engineered Solutions

Custom Die-Cut Converting Engineered Solutions

Our team at Whitlam specializes in design and custom conversions to create a product that meets your needs. Our R&D team and highly skilled engineers can help find the best solution for your application. One solution to replace mechanical fasteners during the application process is by using custom die-cut converting tapes. Some of Whitlam’s converted product solutions include:

Harsh Environment Labels Engineered Solutions

Harsh environment labels have their own specific requirements custom to each customer. With a wide variety of materials and adhesives, Whitlam can custom engineer each solution to provide long-lasting performance under the harshest of conditions. Some harsh environment conditions include those related to temperature, abrasion, humidity, chemical and UV exposure. Whitlam’s labeling solutions include:

Product Identification and Part Marking

Product Identification is critical for Brand Owners, Design Engineers, Legal Departments, End Users, and many others. Gain control of your supply chain and let Whitlam custom design a solution for your products that need to be individually marked for Product Identification, Part Marking, and Tracking purposes throughout the supply chain.

Functional Components 

Functional die-cut component solutions are custom engineered to your specifications in order to improve assembly operations and reduce contamination, damage and scrap all while generating cost savings. Some Functional Component products options include:

 

Whitlam Group can help you find the right label for your specific application that meet your specific requirements. Contact us today for more information!

The post Engineered Solutions appeared first on Whitlam Group.

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/engineered-solutions/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/engineered-solutions/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/engineered-solutions/ [syndication_item_hash] => a51348d72cfbb2e57c2b02c6f0ac1b17 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Engineered Solutions

Array ( [post_title] => Engineered Solutions [post_content] =>

Engineered Solutions

Whitlam group is an industry leader in complete engineered solutions for complex requirements. With over 50 years of experience in the Automotive industry we have build relationships with many engineers and understand the complexity of OEM requirements.

Our custom engineered solutions simplify industry making and manufacturing process, making them leaner and reducing costs. Whitlam’s goal is to make the tough stuff easy and we are here to help you solve your high-performance labeling challenges with our engineered solutions.

Engineered Solutions

Custom Die-Cut Converting Engineered Solutions

Our team at Whitlam specializes in design and custom conversions to create a product that meets your needs. Our R&D team and highly skilled engineers can help find the best solution for your application. One solution to replace mechanical fasteners during the application process is by using custom die-cut converting tapes. Some of Whitlam’s converted product solutions include:

Harsh Environment Labels Engineered Solutions

Harsh environment labels have their own specific requirements custom to each customer. With a wide variety of materials and adhesives, Whitlam can custom engineer each solution to provide long-lasting performance under the harshest of conditions. Some harsh environment conditions include those related to temperature, abrasion, humidity, chemical and UV exposure. Whitlam’s labeling solutions include:

Product Identification and Part Marking

Product Identification is critical for Brand Owners, Design Engineers, Legal Departments, End Users, and many others. Gain control of your supply chain and let Whitlam custom design a solution for your products that need to be individually marked for Product Identification, Part Marking, and Tracking purposes throughout the supply chain.

Functional Components 

Functional die-cut component solutions are custom engineered to your specifications in order to improve assembly operations and reduce contamination, damage and scrap all while generating cost savings. Some Functional Component products options include:Engineered Solutions

 

Whitlam Group can help you find the right label for your specific application that meet your specific requirements. Contact us today for more information!

The post Engineered Solutions appeared first on Whitlam Group.

[post_excerpt] =>

Whitlam group is an industry leader in complete engineered solutions for complex requirements. With over 50 years of experience in the Automotive industry we have build relationships with many engineers and understand the complexity of OEM requirements. Our custom engineered …

The post Engineered Solutions appeared first on Whitlam Group.

[post_date_gmt] => 2020-03-11 18:32:54 [post_date] => 2020-03-11 18:32:54 [post_modified_gmt] => 2020-03-11 18:32:54 [post_modified] => 2020-03-11 18:32:54 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9228 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/engineered-solutions/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/engineered-solutions/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/engineered-solutions/ [syndication_item_hash] => a51348d72cfbb2e57c2b02c6f0ac1b17 [faf_featured_image] => 0 [faf_process_image] => 0,0,0,0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Whitlam Group’s Capabilities

Array ( [post_title] => Whitlam Group’s Capabilities [post_content] =>

Whitlam’s printing capabilities include Digital Printing, Flexographic Printing, and Converting. However, Whitlam offers more than just print and converting solutions.

Pre-Press/Graphic Art

Whitlam’s in-house graphic design team has a combined 40 years of experience in the pre-press and graphic design industry. They are highly skilled and educated to assist anyone with their design needs. Here are some of the artwork solutions we offer:

In-House Lab

Whitlam Group’s In-House Quality Lab continues to acquire state-of-the-art equipment to ensure conformance to your requirements. We have the capabilities to inspect incoming materials and perform tests on converted labels. Here are some solutions our test lab can offer:

Materials

Whitlam maintains a wide range of materials on hand but also can offer a variety of additional materials. We offer different types of adhesives and thicknesses as well. Some of the most popular materials we offer include:

Finishing, Packaging & Warehousing

Whitlam has the capability to inspect, finish, package, & warehouse your products while executing your specific needs. Our inspections are done visually and on state-of-the-art equipment. Our finishing capabilities include sheeting labels, fan folding, stringing and supplying roll form labels on different size cores.

Our warehouse capabilities include strategically packaged products to ensure quality, security and fast delivery all at a low cost. We can even customize your packaging to meet specific requirements to help streamline your process. 

If you want more information about how Whitlam Capabilities can help assist you with your project needs please contact us today at solutions@whitlam.com

 

The post Whitlam Group’s Capabilities appeared first on Whitlam Group.

[post_excerpt] =>

Whitlam’s printing capabilities include Digital Printing, Flexographic Printing, and Converting. However, Whitlam offers more than just print and converting solutions. Pre-Press/Graphic Art Whitlam’s in-house graphic design team has a combined 40 years of experience in the pre-press and graphic design …

The post Whitlam Group’s Capabilities appeared first on Whitlam Group.

[post_date_gmt] => 2020-03-04 13:51:55 [post_date] => 2020-03-04 13:51:55 [post_modified_gmt] => 2020-03-04 13:51:55 [post_modified] => 2020-03-04 13:51:55 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9217 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/whitlam-groups-capabilities/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/whitlam-groups-capabilities/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/whitlam-groups-capabilities/ [syndication_item_hash] => 415e58e99c96f4552a6575d7beca232d ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:https://www.whitlam.com/wp-content/uploads/2020/03/In_house_lab_index_banner.png

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/03/In_house_lab_index_banner.png

Image exists, checking for same file size

Replacing images : - ON

Whitlam’s printing capabilities include Digital Printing, Flexographic Printing, and Converting. However, Whitlam offers more than just print and converting solutions.

Pre-Press/Graphic Art

Whitlam’s in-house graphic design team has a combined 40 years of experience in the pre-press and graphic design industry. They are highly skilled and educated to assist anyone with their design needs. Here are some of the artwork solutions we offer:

In-House Lab

Whitlam Group’s In-House Quality Lab continues to acquire state-of-the-art equipment to ensure conformance to your requirements. We have the capabilities to inspect incoming materials and perform tests on converted labels. Here are some solutions our test lab can offer:

Materials

Whitlam maintains a wide range of materials on hand but also can offer a variety of additional materials. We offer different types of adhesives and thicknesses as well. Some of the most popular materials we offer include:

Finishing, Packaging & Warehousing

Whitlam has the capability to inspect, finish, package, & warehouse your products while executing your specific needs. Our inspections are done visually and on state-of-the-art equipment. Our finishing capabilities include sheeting labels, fan folding, stringing and supplying roll form labels on different size cores.

Our warehouse capabilities include strategically packaged products to ensure quality, security and fast delivery all at a low cost. We can even customize your packaging to meet specific requirements to help streamline your process. 

If you want more information about how Whitlam Capabilities can help assist you with your project needs please contact us today at solutions@whitlam.com

 

The post Whitlam Group’s Capabilities appeared first on Whitlam Group.

Local save:https://www.whitlam.com/wp-content/uploads/2020/03/Lab-e1583329525807.png

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/03/Lab-e1583329525807.png

Image exists, checking for same file size

Replacing images : - ON

Whitlam Group’s Capabilities

Whitlam’s printing capabilities include Digital Printing, Flexographic Printing, and Converting. However, Whitlam offers more than just print and converting solutions.

Pre-Press/Graphic Art

Whitlam’s in-house graphic design team has a combined 40 years of experience in the pre-press and graphic design industry. They are highly skilled and educated to assist anyone with their design needs. Here are some of the artwork solutions we offer:

In-House Lab

Whitlam Group’s In-House Quality Lab continues to acquire state-of-the-art equipment to ensure conformance to your requirements. We have the capabilities to inspect incoming materials and perform tests on converted labels. Here are some solutions our test lab can offer:

Materials

Whitlam maintains a wide range of materials on hand but also can offer a variety of additional materials. We offer different types of adhesives and thicknesses as well. Some of the most popular materials we offer include:

Finishing, Packaging & Warehousing

Whitlam has the capability to inspect, finish, package, & warehouse your products while executing your specific needs. Our inspections are done visually and on state-of-the-art equipment. Our finishing capabilities include sheeting labels, fan folding, stringing and supplying roll form labels on different size cores.

Our warehouse capabilities include strategically packaged products to ensure quality, security and fast delivery all at a low cost. We can even customize your packaging to meet specific requirements to help streamline your process. 

If you want more information about how Whitlam Capabilities can help assist you with your project needs please contact us today at solutions@whitlam.com

 

The post Whitlam Group’s Capabilities appeared first on Whitlam Group.

Local save:https://www.whitlam.com/wp-content/uploads/2020/03/Picture1.png

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/03/Picture1.png

Image exists, checking for same file size

Replacing images : - ON

Whitlam Group’s Capabilities

Whitlam’s printing capabilities include Digital Printing, Flexographic Printing, and Converting. However, Whitlam offers more than just print and converting solutions.

Pre-Press/Graphic Art

Whitlam’s in-house graphic design team has a combined 40 years of experience in the pre-press and graphic design industry. They are highly skilled and educated to assist anyone with their design needs. Here are some of the artwork solutions we offer:

In-House Lab

Whitlam Group’s In-House Quality Lab continues to acquire state-of-the-art equipment to ensure conformance to your requirements. We have the capabilities to inspect incoming materials and perform tests on converted labels. Here are some solutions our test lab can offer:

Materials

Whitlam maintains a wide range of materials on hand but also can offer a variety of additional materials. We offer different types of adhesives and thicknesses as well. Some of the most popular materials we offer include:

Finishing, Packaging & Warehousing

Whitlam has the capability to inspect, finish, package, & warehouse your products while executing your specific needs. Our inspections are done visually and on state-of-the-art equipment. Our finishing capabilities include sheeting labels, fan folding, stringing and supplying roll form labels on different size cores.

Our warehouse capabilities include strategically packaged products to ensure quality, security and fast delivery all at a low cost. We can even customize your packaging to meet specific requirements to help streamline your process. 

If you want more information about how Whitlam Capabilities can help assist you with your project needs please contact us today at solutions@whitlam.com

 

The post Whitlam Group’s Capabilities appeared first on Whitlam Group.

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/whitlam-groups-capabilities/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/whitlam-groups-capabilities/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/whitlam-groups-capabilities/ [syndication_item_hash] => 415e58e99c96f4552a6575d7beca232d )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Whitlam Group’s Capabilities

Array ( [post_title] => Whitlam Group’s Capabilities [post_content] =>

Whitlam Group’s Capabilities

Whitlam’s printing capabilities include Digital Printing, Flexographic Printing, and Converting. However, Whitlam offers more than just print and converting solutions.

Pre-Press/Graphic Art

Whitlam’s in-house graphic design team has a combined 40 years of experience in the pre-press and graphic design industry. They are highly skilled and educated to assist anyone with their design needs. Here are some of the artwork solutions we offer:

In-House Lab

Whitlam Group’s In-House Quality Lab continues to acquire state-of-the-art equipment to ensure conformance to your requirements. We have the capabilities to inspect incoming materials and perform tests on converted labels. Here are some solutions our test lab can offer:

Materials

Whitlam maintains a wide range of materials on hand but also can offer a variety of additional materials. We offer different types of adhesives and thicknesses as well. Some of the most popular materials we offer include:

Finishing, Packaging & Warehousing

Whitlam has the capability to inspect, finish, package, & warehouse your products while executing your specific needs. Our inspections are done visually and on state-of-the-art equipment. Our finishing capabilities include sheeting labels, fan folding, stringing and supplying roll form labels on different size cores.

Our warehouse capabilities include strategically packaged products to ensure quality, security and fast delivery all at a low cost. We can even customize your packaging to meet specific requirements to help streamline your process. 

If you want more information about how Whitlam Capabilities can help assist you with your project needs please contact us today at solutions@whitlam.com

 

The post Whitlam Group’s Capabilities appeared first on Whitlam Group.

[post_excerpt] =>

Whitlam’s printing capabilities include Digital Printing, Flexographic Printing, and Converting. However, Whitlam offers more than just print and converting solutions. Pre-Press/Graphic Art Whitlam’s in-house graphic design team has a combined 40 years of experience in the pre-press and graphic design …

The post Whitlam Group’s Capabilities appeared first on Whitlam Group.

[post_date_gmt] => 2020-03-04 13:51:55 [post_date] => 2020-03-04 13:51:55 [post_modified_gmt] => 2020-03-04 13:51:55 [post_modified] => 2020-03-04 13:51:55 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9217 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/whitlam-groups-capabilities/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/whitlam-groups-capabilities/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/whitlam-groups-capabilities/ [syndication_item_hash] => 415e58e99c96f4552a6575d7beca232d [faf_featured_image] => 0 [faf_process_image] => 0,0,0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Welcome to Whitlam Group Robert Seals

Array ( [post_title] => Welcome to Whitlam Group Robert Seals [post_content] =>

Whitlam Group would like to introduce our newest Account Executive, Robert Seals.

Robert graduated from Michigan State University with a Bachelor of Arts degree in Building Construction Management and a Masters of Arts degree in Organizational Management from The University of Phoenix.

Before Robert joined Whitlam Group, he was a National Account Manager in Consumer Products where he specialized in providing packaging recommendations for the grocery, convenience store and wholesale industry.  Robert was responsible for securing new accounts and growing existing business, along with making packaging recommendation on national branded and store branded offerings.

Robert strengths include new business development, project management, and developing and maintaining solid customer relationships. In his spare time, Robert enjoys reading, running, and working on old vehicles. Robert also enjoys traveling and spending time with his wife, daughters, extended family and close friends.

We are excited to have Robert on the team and look forward to utilizing his experience and skill set to bring value to our current and future customers!

The post Welcome to Whitlam Group Robert Seals appeared first on Whitlam Group.

[post_excerpt] =>

Whitlam Group would like to introduce our newest Account Executive, Robert Seals. Robert graduated from Michigan State University with a Bachelor of Arts degree in Building Construction Management and a Masters of Arts degree in Organizational Management from The University …

The post Welcome to Whitlam Group Robert Seals appeared first on Whitlam Group.

[post_date_gmt] => 2020-02-27 14:13:49 [post_date] => 2020-02-27 14:13:49 [post_modified_gmt] => 2020-02-27 14:13:49 [post_modified] => 2020-02-27 14:13:49 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9209 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/welcome-to-whitlam-group-robert-seals/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/welcome-to-whitlam-group-robert-seals/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/welcome-to-whitlam-group-robert-seals/ [syndication_item_hash] => e7e20cf261ebd8f978621dd44193da34 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:https://www.whitlam.com/wp-content/uploads/2020/02/Robert-Seals.jpg

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/02/Robert-Seals.jpg

Image exists, checking for same file size

Replacing images : - ON

Whitlam Group would like to introduce our newest Account Executive, Robert Seals.

Robert graduated from Michigan State University with a Bachelor of Arts degree in Building Construction Management and a Masters of Arts degree in Organizational Management from The University of Phoenix.

Before Robert joined Whitlam Group, he was a National Account Manager in Consumer Products where he specialized in providing packaging recommendations for the grocery, convenience store and wholesale industry.  Robert was responsible for securing new accounts and growing existing business, along with making packaging recommendation on national branded and store branded offerings.

Robert strengths include new business development, project management, and developing and maintaining solid customer relationships. In his spare time, Robert enjoys reading, running, and working on old vehicles. Robert also enjoys traveling and spending time with his wife, daughters, extended family and close friends.

We are excited to have Robert on the team and look forward to utilizing his experience and skill set to bring value to our current and future customers!

The post Welcome to Whitlam Group Robert Seals appeared first on Whitlam Group.

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/welcome-to-whitlam-group-robert-seals/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/welcome-to-whitlam-group-robert-seals/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/welcome-to-whitlam-group-robert-seals/ [syndication_item_hash] => e7e20cf261ebd8f978621dd44193da34 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Welcome to Whitlam Group Robert Seals

Array ( [post_title] => Welcome to Whitlam Group Robert Seals [post_content] =>

Welcome to Whitlam Group Robert Seals

Whitlam Group would like to introduce our newest Account Executive, Robert Seals.

Robert graduated from Michigan State University with a Bachelor of Arts degree in Building Construction Management and a Masters of Arts degree in Organizational Management from The University of Phoenix.

Before Robert joined Whitlam Group, he was a National Account Manager in Consumer Products where he specialized in providing packaging recommendations for the grocery, convenience store and wholesale industry.  Robert was responsible for securing new accounts and growing existing business, along with making packaging recommendation on national branded and store branded offerings.

Robert strengths include new business development, project management, and developing and maintaining solid customer relationships. In his spare time, Robert enjoys reading, running, and working on old vehicles. Robert also enjoys traveling and spending time with his wife, daughters, extended family and close friends.

We are excited to have Robert on the team and look forward to utilizing his experience and skill set to bring value to our current and future customers!

The post Welcome to Whitlam Group Robert Seals appeared first on Whitlam Group.

[post_excerpt] =>

Whitlam Group would like to introduce our newest Account Executive, Robert Seals. Robert graduated from Michigan State University with a Bachelor of Arts degree in Building Construction Management and a Masters of Arts degree in Organizational Management from The University …

The post Welcome to Whitlam Group Robert Seals appeared first on Whitlam Group.

[post_date_gmt] => 2020-02-27 14:13:49 [post_date] => 2020-02-27 14:13:49 [post_modified_gmt] => 2020-02-27 14:13:49 [post_modified] => 2020-02-27 14:13:49 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9209 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/welcome-to-whitlam-group-robert-seals/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/welcome-to-whitlam-group-robert-seals/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/welcome-to-whitlam-group-robert-seals/ [syndication_item_hash] => e7e20cf261ebd8f978621dd44193da34 [faf_featured_image] => 0 [faf_process_image] => 0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Environmental Standards

Array ( [post_title] => Environmental Standards [post_content] =>

Green Day isn’t just a band it’s every day here at Whitlam Group. Whitlam’s Environmental Policy Statement is “Protect the Environment”. We understand how important it is to make clean choices that will protect our environment for everyone’s future. Here are some of the ways that Whitlam has gone green to Protect the Environment.

We protect the environment through:

Recycled Materials:

Our environmental programs include:

The post Environmental Standards appeared first on Whitlam Group.

[post_excerpt] =>

Green Day isn’t just a band it’s every day here at Whitlam Group. Whitlam’s Environmental Policy Statement is “Protect the Environment”. We understand how important it is to make clean choices that will protect our environment for everyone’s future. Here …

The post Environmental Standards appeared first on Whitlam Group.

[post_date_gmt] => 2020-02-19 19:19:09 [post_date] => 2020-02-19 19:19:09 [post_modified_gmt] => 2020-02-19 19:19:09 [post_modified] => 2020-02-19 19:19:09 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9200 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/environmental-standards/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/environmental-standards/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/environmental-standards/ [syndication_item_hash] => 3264c548e0ebdec855eaeeb948aa2e53 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:https://www.whitlam.com/wp-content/uploads/2020/02/earth2.jpg

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/02/earth2.jpg

Image exists, checking for same file size

Replacing images : - ON

Green Day isn’t just a band it’s every day here at Whitlam Group. Whitlam’s Environmental Policy Statement is “Protect the Environment”. We understand how important it is to make clean choices that will protect our environment for everyone’s future. Here are some of the ways that Whitlam has gone green to Protect the Environment.

We protect the environment through:

Recycled Materials:

Our environmental programs include:

The post Environmental Standards appeared first on Whitlam Group.

Local save:https://www.whitlam.com/wp-content/uploads/2020/02/Environmental-Recycling.jpg

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/02/Environmental-Recycling.jpg

Image exists, checking for same file size

Replacing images : - ON

Environmental Standards

Green Day isn’t just a band it’s every day here at Whitlam Group. Whitlam’s Environmental Policy Statement is “Protect the Environment”. We understand how important it is to make clean choices that will protect our environment for everyone’s future. Here are some of the ways that Whitlam has gone green to Protect the Environment.

We protect the environment through:

Recycled Materials:

Our environmental programs include:

The post Environmental Standards appeared first on Whitlam Group.

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/environmental-standards/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/environmental-standards/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/environmental-standards/ [syndication_item_hash] => 3264c548e0ebdec855eaeeb948aa2e53 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Environmental Standards

Array ( [post_title] => Environmental Standards [post_content] =>

Environmental Standards

Green Day isn’t just a band it’s every day here at Whitlam Group. Whitlam’s Environmental Policy Statement is “Protect the Environment”. We understand how important it is to make clean choices that will protect our environment for everyone’s future. Here are some of the ways that Whitlam has gone green to Protect the Environment.

We protect the environment through:

Recycled Materials:

Environmental Standards

Our environmental programs include:

The post Environmental Standards appeared first on Whitlam Group.

[post_excerpt] =>

Green Day isn’t just a band it’s every day here at Whitlam Group. Whitlam’s Environmental Policy Statement is “Protect the Environment”. We understand how important it is to make clean choices that will protect our environment for everyone’s future. Here …

The post Environmental Standards appeared first on Whitlam Group.

[post_date_gmt] => 2020-02-19 19:19:09 [post_date] => 2020-02-19 19:19:09 [post_modified_gmt] => 2020-02-19 19:19:09 [post_modified] => 2020-02-19 19:19:09 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9200 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/environmental-standards/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/environmental-standards/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/environmental-standards/ [syndication_item_hash] => 3264c548e0ebdec855eaeeb948aa2e53 [faf_featured_image] => 0 [faf_process_image] => 0,0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Electronic Applications

Array ( [post_title] => Electronic Applications [post_content] =>

At Whitlam Group our goal is to make the tough stuff easy. With our R&D team, and highly skilled engineers we can find the right product/application to meet your product requirements.

Whitlam is IATF 16949 ISO14001 Registered, CSA Certified and an UL (Underwriters Laboratories) Authorized Label Supplier.

Electronic technology is improving and becoming more sophisticated every day. In the Automotive Industry automobiles are adapting to include more complex designs and new interactions that electronic technology has brought to the market. It is more common now then ever that the driver information systems in vehicles are digitalize. This includes instrument cluster and driver heads up displays. Smart sensing functions, like collision sensors, parking sensors, and even window dimming sensors have even been more common in vehicle designs. Soon with the growth of the Electric Vehicles, and the development of Autonomous Vehicles there will be even more electronic technology involved in the Automotive Industry.

With technology getting more sophisticated and industries trying to adapt to new electronic technology it is important to have a supplier who understand where the market is going. Whitlam Group has over 50 years of experience in the automotive industry and has watched automobiles adapt throughout the years with new technology and more advanced designs. We see where the market is heading and understand the importance of OEM requirements. Let us help you find the right application to fit your needs.

Not only does Whitlam serve the automotive and electronic markets, we also serve other markets such as medical, industrial, and durable. Whitlam is focused on innovation and we can help you develop your product to make it have a more modern or sleek feel by replacing fasteners with bonding tapes.

Whitlam group can offer a variety of different bonding tapes that are durable, high-performance and have a strong adhesion with resistance to high-temperatures, chemicals, and liquids. This is in addition to being a 3M certified convertor.

Some examples of products that are within our capabilities include:

A variety material with different density, thickness and composition can be used to create these custom die-cut parts to meet your requirements of your products application.

Make Whitlam your source for all your bonding needs! Contact us today for more information.

The post Electronic Applications appeared first on Whitlam Group.

[post_excerpt] =>

At Whitlam Group our goal is to make the tough stuff easy. With our R&D team, and highly skilled engineers we can find the right product/application to meet your product requirements. Whitlam is IATF 16949 ISO14001 Registered, CSA Certified and …

The post Electronic Applications appeared first on Whitlam Group.

[post_date_gmt] => 2020-02-12 15:00:12 [post_date] => 2020-02-12 15:00:12 [post_modified_gmt] => 2020-02-12 15:00:12 [post_modified] => 2020-02-12 15:00:12 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9175 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/electronic-applications/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/electronic-applications/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/electronic-applications/ [syndication_item_hash] => c421e03a53b7ae80a59605032a656170 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:https://www.whitlam.com/wp-content/uploads/2020/02/Getty-ID-829191978.jpg

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/02/Getty-ID-829191978.jpg

Image exists, checking for same file size

Replacing images : - ON

At Whitlam Group our goal is to make the tough stuff easy. With our R&D team, and highly skilled engineers we can find the right product/application to meet your product requirements.

Whitlam is IATF 16949 ISO14001 Registered, CSA Certified and an UL (Underwriters Laboratories) Authorized Label Supplier.

Electronic technology is improving and becoming more sophisticated every day. In the Automotive Industry automobiles are adapting to include more complex designs and new interactions that electronic technology has brought to the market. It is more common now then ever that the driver information systems in vehicles are digitalize. This includes instrument cluster and driver heads up displays. Smart sensing functions, like collision sensors, parking sensors, and even window dimming sensors have even been more common in vehicle designs. Soon with the growth of the Electric Vehicles, and the development of Autonomous Vehicles there will be even more electronic technology involved in the Automotive Industry.

With technology getting more sophisticated and industries trying to adapt to new electronic technology it is important to have a supplier who understand where the market is going. Whitlam Group has over 50 years of experience in the automotive industry and has watched automobiles adapt throughout the years with new technology and more advanced designs. We see where the market is heading and understand the importance of OEM requirements. Let us help you find the right application to fit your needs.

Not only does Whitlam serve the automotive and electronic markets, we also serve other markets such as medical, industrial, and durable. Whitlam is focused on innovation and we can help you develop your product to make it have a more modern or sleek feel by replacing fasteners with bonding tapes.

Whitlam group can offer a variety of different bonding tapes that are durable, high-performance and have a strong adhesion with resistance to high-temperatures, chemicals, and liquids. This is in addition to being a 3M certified convertor.

Some examples of products that are within our capabilities include:

A variety material with different density, thickness and composition can be used to create these custom die-cut parts to meet your requirements of your products application.

Make Whitlam your source for all your bonding needs! Contact us today for more information.

The post Electronic Applications appeared first on Whitlam Group.

Local save:https://www.whitlam.com/wp-content/uploads/2020/02/VHB-application-070.jpg

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/02/VHB-application-070.jpg

Image exists, checking for same file size

Replacing images : - ON

Electronic Applications

At Whitlam Group our goal is to make the tough stuff easy. With our R&D team, and highly skilled engineers we can find the right product/application to meet your product requirements.

Whitlam is IATF 16949 ISO14001 Registered, CSA Certified and an UL (Underwriters Laboratories) Authorized Label Supplier.

Electronic technology is improving and becoming more sophisticated every day. In the Automotive Industry automobiles are adapting to include more complex designs and new interactions that electronic technology has brought to the market. It is more common now then ever that the driver information systems in vehicles are digitalize. This includes instrument cluster and driver heads up displays. Smart sensing functions, like collision sensors, parking sensors, and even window dimming sensors have even been more common in vehicle designs. Soon with the growth of the Electric Vehicles, and the development of Autonomous Vehicles there will be even more electronic technology involved in the Automotive Industry.

With technology getting more sophisticated and industries trying to adapt to new electronic technology it is important to have a supplier who understand where the market is going. Whitlam Group has over 50 years of experience in the automotive industry and has watched automobiles adapt throughout the years with new technology and more advanced designs. We see where the market is heading and understand the importance of OEM requirements. Let us help you find the right application to fit your needs.

Not only does Whitlam serve the automotive and electronic markets, we also serve other markets such as medical, industrial, and durable. Whitlam is focused on innovation and we can help you develop your product to make it have a more modern or sleek feel by replacing fasteners with bonding tapes.

Whitlam group can offer a variety of different bonding tapes that are durable, high-performance and have a strong adhesion with resistance to high-temperatures, chemicals, and liquids. This is in addition to being a 3M certified convertor.

Some examples of products that are within our capabilities include:

A variety material with different density, thickness and composition can be used to create these custom die-cut parts to meet your requirements of your products application.

Make Whitlam your source for all your bonding needs! Contact us today for more information.

The post Electronic Applications appeared first on Whitlam Group.

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/electronic-applications/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/electronic-applications/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/electronic-applications/ [syndication_item_hash] => c421e03a53b7ae80a59605032a656170 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Electronic Applications

Array ( [post_title] => Electronic Applications [post_content] =>

Electronic Applications

At Whitlam Group our goal is to make the tough stuff easy. With our R&D team, and highly skilled engineers we can find the right product/application to meet your product requirements.

Whitlam is IATF 16949 ISO14001 Registered, CSA Certified and an UL (Underwriters Laboratories) Authorized Label Supplier.

Electronic technology is improving and becoming more sophisticated every day. In the Automotive Industry automobiles are adapting to include more complex designs and new interactions that electronic technology has brought to the market. It is more common now then ever that the driver information systems in vehicles are digitalize. This includes instrument cluster and driver heads up displays. Smart sensing functions, like collision sensors, parking sensors, and even window dimming sensors have even been more common in vehicle designs. Soon with the growth of the Electric Vehicles, and the development of Autonomous Vehicles there will be even more electronic technology involved in the Automotive Industry.

With technology getting more sophisticated and industries trying to adapt to new electronic technology it is important to have a supplier who understand where the market is going. Whitlam Group has over 50 years of experience in the automotive industry and has watched automobiles adapt throughout the years with new technology and more advanced designs. We see where the market is heading and understand the importance of OEM requirements. Let us help you find the right application to fit your needs.Electronic Applications

Not only does Whitlam serve the automotive and electronic markets, we also serve other markets such as medical, industrial, and durable. Whitlam is focused on innovation and we can help you develop your product to make it have a more modern or sleek feel by replacing fasteners with bonding tapes.

Whitlam group can offer a variety of different bonding tapes that are durable, high-performance and have a strong adhesion with resistance to high-temperatures, chemicals, and liquids. This is in addition to being a 3M certified convertor.

Some examples of products that are within our capabilities include:

A variety material with different density, thickness and composition can be used to create these custom die-cut parts to meet your requirements of your products application.

Make Whitlam your source for all your bonding needs! Contact us today for more information.

The post Electronic Applications appeared first on Whitlam Group.

[post_excerpt] =>

At Whitlam Group our goal is to make the tough stuff easy. With our R&D team, and highly skilled engineers we can find the right product/application to meet your product requirements. Whitlam is IATF 16949 ISO14001 Registered, CSA Certified and …

The post Electronic Applications appeared first on Whitlam Group.

[post_date_gmt] => 2020-02-12 15:00:12 [post_date] => 2020-02-12 15:00:12 [post_modified_gmt] => 2020-02-12 15:00:12 [post_modified] => 2020-02-12 15:00:12 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9175 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/electronic-applications/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/electronic-applications/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/electronic-applications/ [syndication_item_hash] => c421e03a53b7ae80a59605032a656170 [faf_featured_image] => 0 [faf_process_image] => 0,0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Weatherability

Array ( [post_title] => Weatherability [post_content] =>

Weatherability is the ability of a label to withstand the effects of outdoor weathering, sunlight, heat, cold, humidity, rain, snow, and time.

Some of the components, along with the weather, that effect the life of a label include the type of ink used, the base material and the top coating of the label, and what substate the material will adhere to.

Why Weatherability Matters

The weather can cause a label to peel off easy or by itself, lose color, become illegible, scratch, or fade completely. The problem is that these labels may have important information on them that is essential or important so therefore these labels need to last as long as the products they are on.

It is important for labels to remain legible for product information such as lot numbers, barcodes, instructions, safety warnings, and warranties.

Solutions

There is no one-fits all answer when it comes to weatherability because each situation and weather type is different for every label.

It is important to understand the different types of weather environments your label will be in and make sure to test your label and review the results before choosing the best solutions.

Different types of common weathering tests that are done are:

The final results will give you an evaluation on adhesion, legibility, color retention abrasion resistance and other properties. 

Why Whitlam

Whitlam has over 50 years of experience in the Automotive Industry we understand regulations and requirements of labels. With our In-House Lab we have the capabilities to test labels against some of these types of weather conditions. We have solutions that will help your label withstand the effects of outdoor weathering, sunlight, heat, cold, humidity, rain, and time.

Whitlam can offer solutions that are tougher, better and longer lasting. For more information contact Whitlam today!

The post Weatherability appeared first on Whitlam Group.

[post_excerpt] =>

Weatherability is the ability of a label to withstand the effects of outdoor weathering, sunlight, heat, cold, humidity, rain, snow, and time. Some of the components, along with the weather, that effect the life of a label include the type …

The post Weatherability appeared first on Whitlam Group.

[post_date_gmt] => 2020-01-29 13:45:07 [post_date] => 2020-01-29 13:45:07 [post_modified_gmt] => 2020-01-29 13:45:07 [post_modified] => 2020-01-29 13:45:07 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9138 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/weatherability/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/weatherability/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/weatherability/ [syndication_item_hash] => 00c4edc236507eb6b91fcc4ed950db88 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:https://www.whitlam.com/wp-content/uploads/2020/01/weatherability-01.jpg

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/01/weatherability-01.jpg

Image exists, checking for same file size

Replacing images : - ON

Weatherability is the ability of a label to withstand the effects of outdoor weathering, sunlight, heat, cold, humidity, rain, snow, and time.

Some of the components, along with the weather, that effect the life of a label include the type of ink used, the base material and the top coating of the label, and what substate the material will adhere to.

Why Weatherability Matters

The weather can cause a label to peel off easy or by itself, lose color, become illegible, scratch, or fade completely. The problem is that these labels may have important information on them that is essential or important so therefore these labels need to last as long as the products they are on.

It is important for labels to remain legible for product information such as lot numbers, barcodes, instructions, safety warnings, and warranties.

Solutions

There is no one-fits all answer when it comes to weatherability because each situation and weather type is different for every label.

It is important to understand the different types of weather environments your label will be in and make sure to test your label and review the results before choosing the best solutions.

Different types of common weathering tests that are done are:

The final results will give you an evaluation on adhesion, legibility, color retention abrasion resistance and other properties. 

Why Whitlam

Whitlam has over 50 years of experience in the Automotive Industry we understand regulations and requirements of labels. With our In-House Lab we have the capabilities to test labels against some of these types of weather conditions. We have solutions that will help your label withstand the effects of outdoor weathering, sunlight, heat, cold, humidity, rain, and time.

Whitlam can offer solutions that are tougher, better and longer lasting. For more information contact Whitlam today!

The post Weatherability appeared first on Whitlam Group.

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/weatherability/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/weatherability/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/weatherability/ [syndication_item_hash] => 00c4edc236507eb6b91fcc4ed950db88 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Weatherability

Array ( [post_title] => Weatherability [post_content] =>

Weatherability

Weatherability is the ability of a label to withstand the effects of outdoor weathering, sunlight, heat, cold, humidity, rain, snow, and time.

Some of the components, along with the weather, that effect the life of a label include the type of ink used, the base material and the top coating of the label, and what substate the material will adhere to.

Why Weatherability Matters

The weather can cause a label to peel off easy or by itself, lose color, become illegible, scratch, or fade completely. The problem is that these labels may have important information on them that is essential or important so therefore these labels need to last as long as the products they are on.

It is important for labels to remain legible for product information such as lot numbers, barcodes, instructions, safety warnings, and warranties.

Solutions

There is no one-fits all answer when it comes to weatherability because each situation and weather type is different for every label.

It is important to understand the different types of weather environments your label will be in and make sure to test your label and review the results before choosing the best solutions.

Different types of common weathering tests that are done are:

The final results will give you an evaluation on adhesion, legibility, color retention abrasion resistance and other properties. 

Why Whitlam

Whitlam has over 50 years of experience in the Automotive Industry we understand regulations and requirements of labels. With our In-House Lab we have the capabilities to test labels against some of these types of weather conditions. We have solutions that will help your label withstand the effects of outdoor weathering, sunlight, heat, cold, humidity, rain, and time.

Whitlam can offer solutions that are tougher, better and longer lasting. For more information contact Whitlam today!

The post Weatherability appeared first on Whitlam Group.

[post_excerpt] =>

Weatherability is the ability of a label to withstand the effects of outdoor weathering, sunlight, heat, cold, humidity, rain, snow, and time. Some of the components, along with the weather, that effect the life of a label include the type …

The post Weatherability appeared first on Whitlam Group.

[post_date_gmt] => 2020-01-29 13:45:07 [post_date] => 2020-01-29 13:45:07 [post_modified_gmt] => 2020-01-29 13:45:07 [post_modified] => 2020-01-29 13:45:07 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9138 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/weatherability/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/weatherability/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/weatherability/ [syndication_item_hash] => 00c4edc236507eb6b91fcc4ed950db88 [faf_featured_image] => 0 [faf_process_image] => 0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Interior Automotive Solutions

Array ( [post_title] => Interior Automotive Solutions [post_content] =>

Automotive Interior

Whitlam Group has been an industry leader in the automotive market for over 50 years. We understand how closely Automotive labels are evaluated to ensure compliance with OEM mandated regulations and performance requirements. Our Automotive labels are the best in the industry and can be customized to fit your company’s needs. We know where the industry has been and where it is going.

Whitlam Group can offer solutions for attaching interior automotive parts such as:

Materials used for binding these attachments include characteristics such as:

In our experience working with Automotive OEM’s, Tier and after market suppliers we know how important quality is.

Whitlam’s quality objectives:

Our Continual improvement philosophy is committed to improving the quality of our products, services, cost and productivity. The process of continual improvement is achieved by maintaining an atmosphere for knowledge, innovation, training and team effort throughout our organization.

Whitlam is compliant with OEM mandated regulations and performance requirements. We are IATF 16949:2016 and ISO 14001:2015 certified.

If you would like more information about Whitlam’s Interior Automotive Label Solutions contact us today!

 

The post Interior Automotive Solutions appeared first on Whitlam Group.

[post_excerpt] =>

Whitlam Group has been an industry leader in the automotive market for over 50 years. We understand how closely Automotive labels are evaluated to ensure compliance with OEM mandated regulations and performance requirements. Our Automotive labels are the best in …

The post Interior Automotive Solutions appeared first on Whitlam Group.

[post_date_gmt] => 2020-01-22 18:16:26 [post_date] => 2020-01-22 18:16:26 [post_modified_gmt] => 2020-01-22 18:16:26 [post_modified] => 2020-01-22 18:16:26 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9127 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/interior-automotive-solutions/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/interior-automotive-solutions/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/interior-automotive-solutions/ [syndication_item_hash] => dd8e9b4199c742682f5216884c95a461 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 252 ) [post_tag] => Array ( [0] => 4054 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:https://www.whitlam.com/wp-content/uploads/2020/01/Interior.jpg

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/01/Interior.jpg

Image exists, checking for same file size

Replacing images : Automotive Interior - Automotive Interior ON

Automotive Interior

Whitlam Group has been an industry leader in the automotive market for over 50 years. We understand how closely Automotive labels are evaluated to ensure compliance with OEM mandated regulations and performance requirements. Our Automotive labels are the best in the industry and can be customized to fit your company’s needs. We know where the industry has been and where it is going.

Whitlam Group can offer solutions for attaching interior automotive parts such as:

Materials used for binding these attachments include characteristics such as:

In our experience working with Automotive OEM’s, Tier and after market suppliers we know how important quality is.

Whitlam’s quality objectives:

Our Continual improvement philosophy is committed to improving the quality of our products, services, cost and productivity. The process of continual improvement is achieved by maintaining an atmosphere for knowledge, innovation, training and team effort throughout our organization.

Whitlam is compliant with OEM mandated regulations and performance requirements. We are IATF 16949:2016 and ISO 14001:2015 certified.

If you would like more information about Whitlam’s Interior Automotive Label Solutions contact us today!

 

The post Interior Automotive Solutions appeared first on Whitlam Group.

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/interior-automotive-solutions/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/interior-automotive-solutions/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/interior-automotive-solutions/ [syndication_item_hash] => dd8e9b4199c742682f5216884c95a461 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Interior Automotive Solutions

Array ( [post_title] => Interior Automotive Solutions [post_content] =>

Interior Automotive Solutions

Whitlam Group has been an industry leader in the automotive market for over 50 years. We understand how closely Automotive labels are evaluated to ensure compliance with OEM mandated regulations and performance requirements. Our Automotive labels are the best in the industry and can be customized to fit your company’s needs. We know where the industry has been and where it is going.

Whitlam Group can offer solutions for attaching interior automotive parts such as:

Materials used for binding these attachments include characteristics such as:

In our experience working with Automotive OEM’s, Tier and after market suppliers we know how important quality is.

Whitlam’s quality objectives:

Our Continual improvement philosophy is committed to improving the quality of our products, services, cost and productivity. The process of continual improvement is achieved by maintaining an atmosphere for knowledge, innovation, training and team effort throughout our organization.

Whitlam is compliant with OEM mandated regulations and performance requirements. We are IATF 16949:2016 and ISO 14001:2015 certified.

If you would like more information about Whitlam’s Interior Automotive Label Solutions contact us today!

 

The post Interior Automotive Solutions appeared first on Whitlam Group.

[post_excerpt] =>

Whitlam Group has been an industry leader in the automotive market for over 50 years. We understand how closely Automotive labels are evaluated to ensure compliance with OEM mandated regulations and performance requirements. Our Automotive labels are the best in …

The post Interior Automotive Solutions appeared first on Whitlam Group.

[post_date_gmt] => 2020-01-22 18:16:26 [post_date] => 2020-01-22 18:16:26 [post_modified_gmt] => 2020-01-22 18:16:26 [post_modified] => 2020-01-22 18:16:26 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9127 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/interior-automotive-solutions/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/interior-automotive-solutions/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/interior-automotive-solutions/ [syndication_item_hash] => dd8e9b4199c742682f5216884c95a461 [faf_featured_image] => 0 [faf_process_image] => 0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 252 ) [post_tag] => Array ( [0] => 4054 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Whitlam Core Values 

Array ( [post_title] => Whitlam Core Values  [post_content] =>

Whitlam was founded in 1957. Since that time Whitlam has gone by a fundamental principle that we call our Core Values. Our Core Values define who we are and what we stand for.

One of Whitlam’s core values is to be kind and respectful. To us this means celebrating our similarities AND our differences. We show kindness by exhibit friendliness to everyone who walks through our door or who we meet. We have respect for each other, suppliers, customers and business partners. When someone has a difference of opinion, we listen to them and are open to what they have to say. Whitlam exhibits patience and a kind attitude. We show empathy by putting ourselves in other peoples shows.

Secondly, Whitlam exhibits honesty and integrity by taking pride in our work. Here at Whitlam we aren’t afraid of failure because we learn from our mistakes. At Whitlam we do what we say we will do, and we follow through. If someone asks us a question that we don’t know we aren’t afraid to do research or ask someone else for help until we know the answer.

Thirdly we try our best to go above and beyond. This includes:

Teamwork is our fourth core value. We encourage teamwork and demonstrate a willingness to help others. We lift each other up and work together to find the best solutions.  We make sure to communicate often and clearly. We are helpful to everyone, especially for those that are new. Often, we celebrate one another and our achievements.

As many of us like to say:

“It takes a Village”

All these core values show through in our last core value which is customer focus. Customer focus is one of our most important values because our customers are very important to us and we put our customers first. Whitlam display’s a true commitment to excellence. We create strong partnership with our customers and strive to be a good active listener that are open to new ideas and changes. With our open-mindedness we make sure we understand the needs of others. Our customers can see our core values shine through because not only do we treat each other with kindness, respect, honesty and integrity but we make sure we follow through and treat our customers the same. Whitlam is a family and our customers are part of our family.

With Whitlam’s core values we make sure that we add value wherever we go, and with whomever we meet. Using our technical knowledge and experience we make the tough stuff easy. If you would like more information about Whitlam please contact us today!

The post Whitlam Core Values  appeared first on Whitlam Group.

[post_excerpt] =>

Whitlam was founded in 1957. Since that time Whitlam has gone by a fundamental principle that we call our Core Values. Our Core Values define who we are and what we stand for. One of Whitlam’s core values is to …

The post Whitlam Core Values  appeared first on Whitlam Group.

[post_date_gmt] => 2020-01-15 13:43:51 [post_date] => 2020-01-15 13:43:51 [post_modified_gmt] => 2020-01-15 13:43:51 [post_modified] => 2020-01-15 13:43:51 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9116 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/whitlam-core-values/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/whitlam-core-values/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/whitlam-core-values/ [syndication_item_hash] => 4a2d56b870260382c74eeea4f5696f7f ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 3335 [1] => 10054 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:https://www.whitlam.com/wp-content/uploads/2019/12/CoreValueMain1.png

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2019/12/CoreValueMain1.png

Image exists, checking for same file size

Replacing images : - ON

Whitlam was founded in 1957. Since that time Whitlam has gone by a fundamental principle that we call our Core Values. Our Core Values define who we are and what we stand for.

One of Whitlam’s core values is to be kind and respectful. To us this means celebrating our similarities AND our differences. We show kindness by exhibit friendliness to everyone who walks through our door or who we meet. We have respect for each other, suppliers, customers and business partners. When someone has a difference of opinion, we listen to them and are open to what they have to say. Whitlam exhibits patience and a kind attitude. We show empathy by putting ourselves in other peoples shows.

Secondly, Whitlam exhibits honesty and integrity by taking pride in our work. Here at Whitlam we aren’t afraid of failure because we learn from our mistakes. At Whitlam we do what we say we will do, and we follow through. If someone asks us a question that we don’t know we aren’t afraid to do research or ask someone else for help until we know the answer.

Thirdly we try our best to go above and beyond. This includes:

Teamwork is our fourth core value. We encourage teamwork and demonstrate a willingness to help others. We lift each other up and work together to find the best solutions.  We make sure to communicate often and clearly. We are helpful to everyone, especially for those that are new. Often, we celebrate one another and our achievements.

As many of us like to say:

“It takes a Village”

All these core values show through in our last core value which is customer focus. Customer focus is one of our most important values because our customers are very important to us and we put our customers first. Whitlam display’s a true commitment to excellence. We create strong partnership with our customers and strive to be a good active listener that are open to new ideas and changes. With our open-mindedness we make sure we understand the needs of others. Our customers can see our core values shine through because not only do we treat each other with kindness, respect, honesty and integrity but we make sure we follow through and treat our customers the same. Whitlam is a family and our customers are part of our family.

With Whitlam’s core values we make sure that we add value wherever we go, and with whomever we meet. Using our technical knowledge and experience we make the tough stuff easy. If you would like more information about Whitlam please contact us today!

The post Whitlam Core Values  appeared first on Whitlam Group.

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/whitlam-core-values/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/whitlam-core-values/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/whitlam-core-values/ [syndication_item_hash] => 4a2d56b870260382c74eeea4f5696f7f )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Whitlam Core Values 

Array ( [post_title] => Whitlam Core Values  [post_content] =>

Whitlam Core Values 

Whitlam was founded in 1957. Since that time Whitlam has gone by a fundamental principle that we call our Core Values. Our Core Values define who we are and what we stand for.

One of Whitlam’s core values is to be kind and respectful. To us this means celebrating our similarities AND our differences. We show kindness by exhibit friendliness to everyone who walks through our door or who we meet. We have respect for each other, suppliers, customers and business partners. When someone has a difference of opinion, we listen to them and are open to what they have to say. Whitlam exhibits patience and a kind attitude. We show empathy by putting ourselves in other peoples shows.

Secondly, Whitlam exhibits honesty and integrity by taking pride in our work. Here at Whitlam we aren’t afraid of failure because we learn from our mistakes. At Whitlam we do what we say we will do, and we follow through. If someone asks us a question that we don’t know we aren’t afraid to do research or ask someone else for help until we know the answer.

Thirdly we try our best to go above and beyond. This includes:

Teamwork is our fourth core value. We encourage teamwork and demonstrate a willingness to help others. We lift each other up and work together to find the best solutions.  We make sure to communicate often and clearly. We are helpful to everyone, especially for those that are new. Often, we celebrate one another and our achievements.

As many of us like to say:

“It takes a Village”

All these core values show through in our last core value which is customer focus. Customer focus is one of our most important values because our customers are very important to us and we put our customers first. Whitlam display’s a true commitment to excellence. We create strong partnership with our customers and strive to be a good active listener that are open to new ideas and changes. With our open-mindedness we make sure we understand the needs of others. Our customers can see our core values shine through because not only do we treat each other with kindness, respect, honesty and integrity but we make sure we follow through and treat our customers the same. Whitlam is a family and our customers are part of our family.

With Whitlam’s core values we make sure that we add value wherever we go, and with whomever we meet. Using our technical knowledge and experience we make the tough stuff easy. If you would like more information about Whitlam please contact us today!

The post Whitlam Core Values  appeared first on Whitlam Group.

[post_excerpt] =>

Whitlam was founded in 1957. Since that time Whitlam has gone by a fundamental principle that we call our Core Values. Our Core Values define who we are and what we stand for. One of Whitlam’s core values is to …

The post Whitlam Core Values  appeared first on Whitlam Group.

[post_date_gmt] => 2020-01-15 13:43:51 [post_date] => 2020-01-15 13:43:51 [post_modified_gmt] => 2020-01-15 13:43:51 [post_modified] => 2020-01-15 13:43:51 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9116 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/whitlam-core-values/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/whitlam-core-values/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/whitlam-core-values/ [syndication_item_hash] => 4a2d56b870260382c74eeea4f5696f7f [faf_featured_image] => 0 [faf_process_image] => 0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 3335 [1] => 10054 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Solutions for Galvanic Corrosion

Array ( [post_title] => Solutions for Galvanic Corrosion [post_content] =>

When two dissimilar metals are brought into electrical contact, Galvanic Corrosion occurs. The electrical contact of these two metals changes their individual corrosion rates. One of the dissimilar metals corrodes faster than it normally would by itself, while the other dissimilar metal corrodes slower than it would by itself. 

There are different weathering environments that can cause galvanic corrosion such as water, heat, humidity and more.

Other factures besides weathering environments can also play into the effects that cause galvanic corrosion such as the way they are assembled, what metals are involved, and more.

A great example of Galvanic Corrosion is the Statue of Liberty. In the 1980s during a regular maintenance check revealed that corrosion had accrued between the copper outer skin and the wrought iron support structure.

Galvanic Corrosion can also occur with dissimilar metals on a vehicle. When you have a spare tire that is located under a vehicle, the spare tire is mounted in a heat resistant shield. That shield is then mounted to the frame under a vehicle. The heat resistant shield and frame of the vehicle are two different metals. The mount where these two are mounted together can develop galvanic corrosion. There are solutions to prevent galvanic corrosion from occurring.

Whitlam engineering team has developed various solutions to help eliminate galvanic corrosion. With our In-House lab and R&D team we can test products and come up with the best solution for your products need. At Whitlam our goal is to make the tough stuff easy.

Let us help you, contact us today for more information.

The post Solutions for Galvanic Corrosion appeared first on Whitlam Group.

[post_excerpt] =>

When two dissimilar metals are brought into electrical contact, Galvanic Corrosion occurs. The electrical contact of these two metals changes their individual corrosion rates. One of the dissimilar metals corrodes faster than it normally would by itself, while the other …

The post Solutions for Galvanic Corrosion appeared first on Whitlam Group.

[post_date_gmt] => 2020-01-08 13:04:42 [post_date] => 2020-01-08 13:04:42 [post_modified_gmt] => 2020-01-08 13:04:42 [post_modified] => 2020-01-08 13:04:42 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9106 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/solutions-for-galvanic-corrosion/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/solutions-for-galvanic-corrosion/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/solutions-for-galvanic-corrosion/ [syndication_item_hash] => 08bf30489c50f68ae6a9b6a28fffaf3d ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:https://www.whitlam.com/wp-content/uploads/2020/01/Galvanic-Corrosion-1024x373.jpg

Image process :: Saving local image

grab remote location : https://www.whitlam.com/wp-content/uploads/2020/01/Galvanic-Corrosion-1024x373.jpg

Image exists, checking for same file size

Replacing images : - ON

When two dissimilar metals are brought into electrical contact, Galvanic Corrosion occurs. The electrical contact of these two metals changes their individual corrosion rates. One of the dissimilar metals corrodes faster than it normally would by itself, while the other dissimilar metal corrodes slower than it would by itself. 

There are different weathering environments that can cause galvanic corrosion such as water, heat, humidity and more.

Other factures besides weathering environments can also play into the effects that cause galvanic corrosion such as the way they are assembled, what metals are involved, and more.

A great example of Galvanic Corrosion is the Statue of Liberty. In the 1980s during a regular maintenance check revealed that corrosion had accrued between the copper outer skin and the wrought iron support structure.

Galvanic Corrosion can also occur with dissimilar metals on a vehicle. When you have a spare tire that is located under a vehicle, the spare tire is mounted in a heat resistant shield. That shield is then mounted to the frame under a vehicle. The heat resistant shield and frame of the vehicle are two different metals. The mount where these two are mounted together can develop galvanic corrosion. There are solutions to prevent galvanic corrosion from occurring.

Whitlam engineering team has developed various solutions to help eliminate galvanic corrosion. With our In-House lab and R&D team we can test products and come up with the best solution for your products need. At Whitlam our goal is to make the tough stuff easy.

Let us help you, contact us today for more information.

The post Solutions for Galvanic Corrosion appeared first on Whitlam Group.

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/solutions-for-galvanic-corrosion/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/solutions-for-galvanic-corrosion/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/solutions-for-galvanic-corrosion/ [syndication_item_hash] => 08bf30489c50f68ae6a9b6a28fffaf3d )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Solutions for Galvanic Corrosion

Array ( [post_title] => Solutions for Galvanic Corrosion [post_content] =>

Solutions for Galvanic CorrosionWhen two dissimilar metals are brought into electrical contact, Galvanic Corrosion occurs. The electrical contact of these two metals changes their individual corrosion rates. One of the dissimilar metals corrodes faster than it normally would by itself, while the other dissimilar metal corrodes slower than it would by itself. 

There are different weathering environments that can cause galvanic corrosion such as water, heat, humidity and more.

Other factures besides weathering environments can also play into the effects that cause galvanic corrosion such as the way they are assembled, what metals are involved, and more.

A great example of Galvanic Corrosion is the Statue of Liberty. In the 1980s during a regular maintenance check revealed that corrosion had accrued between the copper outer skin and the wrought iron support structure.

Galvanic Corrosion can also occur with dissimilar metals on a vehicle. When you have a spare tire that is located under a vehicle, the spare tire is mounted in a heat resistant shield. That shield is then mounted to the frame under a vehicle. The heat resistant shield and frame of the vehicle are two different metals. The mount where these two are mounted together can develop galvanic corrosion. There are solutions to prevent galvanic corrosion from occurring.

Whitlam engineering team has developed various solutions to help eliminate galvanic corrosion. With our In-House lab and R&D team we can test products and come up with the best solution for your products need. At Whitlam our goal is to make the tough stuff easy.

Let us help you, contact us today for more information.

The post Solutions for Galvanic Corrosion appeared first on Whitlam Group.

[post_excerpt] =>

When two dissimilar metals are brought into electrical contact, Galvanic Corrosion occurs. The electrical contact of these two metals changes their individual corrosion rates. One of the dissimilar metals corrodes faster than it normally would by itself, while the other …

The post Solutions for Galvanic Corrosion appeared first on Whitlam Group.

[post_date_gmt] => 2020-01-08 13:04:42 [post_date] => 2020-01-08 13:04:42 [post_modified_gmt] => 2020-01-08 13:04:42 [post_modified] => 2020-01-08 13:04:42 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => https://www.whitlam.com/?p=9106 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Blog – Whitlam Group [syndication_source_uri] => https://www.whitlam.com [syndication_source_id] => http://www.whitlam.com/blog/feed/ [rss:comments] => https://www.whitlam.com/2020/solutions-for-galvanic-corrosion/#respond [wfw:commentRSS] => https://www.whitlam.com/2020/solutions-for-galvanic-corrosion/feed/ [syndication_feed] => http://www.whitlam.com/blog/feed/ [syndication_feed_id] => 46 [syndication_permalink] => https://www.whitlam.com/2020/solutions-for-galvanic-corrosion/ [syndication_item_hash] => 08bf30489c50f68ae6a9b6a28fffaf3d [faf_featured_image] => 0 [faf_process_image] => 0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedlink.class.php on line 302

Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedlink.class.php on line 302

Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Cross-industry and cross-application alliance for Single Pair Ethernet technology

Array ( [post_title] => Cross-industry and cross-application alliance for Single Pair Ethernet technology [post_content] =>

Cross-industry and cross-application alliance for Single Pair Ethernet technology

The technology partnership between Phoenix Contact, Weidmüller, Reichle & De-Massari (R&M), Fluke Networks, and Telegärtner for the Single Pair Ethernet (SPE) has progressed to create the SPE System Alliance. Find out more about this collaboration.

The newly formed SPE System Alliance consists of leading technology companies from various industries and fields of application who have come together to bundle their respective SPE expertise and ensure the target-oriented exchange of this knowledge. The partners in this group are pursuing the goal of driving the development of SPE further forward for the Industrial Internet of Things (IIoT) and may branch out to other areas as well. 

The System Alliance has most recently been joined by Datwyler, Kyland, Microchip Technology, Rosenberger, SICK, O-Ring, Draka/Prysmian Group, and University 4 Industry. 

Synergies in the SPE System Alliance
The network aims to collaborate on the technological challenges faced when implementing SPE in IIoT applications. The goal of the companies is to accelerate their own development of expertise in SPE technology and to allow it to be implemented faster and more reliably in their products.

Through this orientation toward a cross-industry and cross-application exchange platform, companies from all future SPE ecosystems are coming together. The focus is not, however, on individual aspects such as connection technology. Instead, the focus is on questions and challenges that continue to exist with many market participants in connection with SPE. Rule exchange formats and collaborative project activities provide the freedom for close cooperation. The members are already working together in the first sub-communities, in the fields of connection technology, standardisation, SPE use-case reports, and even for cable solutions, among others.

Commenting on the alliance, Torsten Janwelcke, President Business Area Device Connectors at Phoenix Contact, said: “SPE is one of the mega trends in industrial data processing for end-to-end IP-based networking from the sensor to the cloud. The Single Pair Ethernet technology therefore not only includes all infrastructure components of industrial network technology, such as connectors, cables, PHYs, sensors, switches and other devices, but will find its application in many different areas. This is exactly where the SPE System Alliance comes in. The exchange of members takes place across industries and applications and is not limited to one aspect, such as connection technology. All participating companies can contribute their expertise in the various working groups and thus also benefit from the exchange. The contribution of Phoenix Contact in the Alliance refers in particular to the part of connection technology and switches. Here, we contribute, among other things, findings on the newly developed M8 SPE connector, which is highly relevant for the connection of sensors and thus for the implementation of IIoT and SPE.”

Thanks to its broad lineup, the SPE System Alliance already covers a large range of applications and fields of application: For example, within the automotive industry Ethernet systems are increasingly being employed within vehicles. Meanwhile, for the passive industrial cabling field of connectivity SPE can provide consistent IP communication from the field level right through to the corporate level, and therefore from the sensor through to the cloud. 

Further, in sensor technology, in addition to their use in classic automation technology, sensors are increasingly being integrated as intelligent data suppliers into IIoT applications via Ethernet networks. Due to the miniaturisation of the connection technology that has become possible with SPE, smaller sensors can also be connected to Ethernet networks. Combining SPE with the power supply over the data line means that additional plug connections to the voltage supply are no longer needed. Moreover, the use of SPE as the standard interface allows device manufacturers to provide an optimised range of devices with fewer versions.

The SPE System Alliance is an open platform for companies that want to further advance SPE technology on the market. Details and options for contacting the System Alliance are available on the website www.singlepairethernet.com

> [post_excerpt] =>

The technology partnership between Phoenix Contact, Weidmüller, Reichle & De-Massari (R&M), Fluke Networks, and Telegärtner for the Single Pair Ethernet (SPE) has progressed to create the SPE System Alliance. Find out more about this collaboration. [post_date_gmt] => 2020-05-27 09:27:29 [post_date] => 2020-05-27 09:27:29 [post_modified_gmt] => 2020-05-27 09:27:29 [post_modified] => 2020-05-27 09:27:29 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178673 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186686 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178673/Cross-industry-and-cross-application-alliance--for-Single-Pair-Ethernet-technology.aspx [syndication_item_hash] => e33982109f736a790d6ad2433a4c4b61 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186686 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178673/Cross-industry-and-cross-application-alliance--for-Single-Pair-Ethernet-technology.aspx [syndication_item_hash] => e33982109f736a790d6ad2433a4c4b61 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=186686 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=186686 image/jpeg

Decide filter: Returning post, everything seems orderly :Cross-industry and cross-application alliance for Single Pair Ethernet technology

Array ( [post_title] => Cross-industry and cross-application alliance for Single Pair Ethernet technology [post_content] =>

Cross-industry and cross-application alliance for Single Pair Ethernet technology

The technology partnership between Phoenix Contact, Weidmüller, Reichle & De-Massari (R&M), Fluke Networks, and Telegärtner for the Single Pair Ethernet (SPE) has progressed to create the SPE System Alliance. Find out more about this collaboration.

The newly formed SPE System Alliance consists of leading technology companies from various industries and fields of application who have come together to bundle their respective SPE expertise and ensure the target-oriented exchange of this knowledge. The partners in this group are pursuing the goal of driving the development of SPE further forward for the Industrial Internet of Things (IIoT) and may branch out to other areas as well. 

The System Alliance has most recently been joined by Datwyler, Kyland, Microchip Technology, Rosenberger, SICK, O-Ring, Draka/Prysmian Group, and University 4 Industry. 

Synergies in the SPE System Alliance
The network aims to collaborate on the technological challenges faced when implementing SPE in IIoT applications. The goal of the companies is to accelerate their own development of expertise in SPE technology and to allow it to be implemented faster and more reliably in their products.

Through this orientation toward a cross-industry and cross-application exchange platform, companies from all future SPE ecosystems are coming together. The focus is not, however, on individual aspects such as connection technology. Instead, the focus is on questions and challenges that continue to exist with many market participants in connection with SPE. Rule exchange formats and collaborative project activities provide the freedom for close cooperation. The members are already working together in the first sub-communities, in the fields of connection technology, standardisation, SPE use-case reports, and even for cable solutions, among others.

Commenting on the alliance, Torsten Janwelcke, President Business Area Device Connectors at Phoenix Contact, said: “SPE is one of the mega trends in industrial data processing for end-to-end IP-based networking from the sensor to the cloud. The Single Pair Ethernet technology therefore not only includes all infrastructure components of industrial network technology, such as connectors, cables, PHYs, sensors, switches and other devices, but will find its application in many different areas. This is exactly where the SPE System Alliance comes in. The exchange of members takes place across industries and applications and is not limited to one aspect, such as connection technology. All participating companies can contribute their expertise in the various working groups and thus also benefit from the exchange. The contribution of Phoenix Contact in the Alliance refers in particular to the part of connection technology and switches. Here, we contribute, among other things, findings on the newly developed M8 SPE connector, which is highly relevant for the connection of sensors and thus for the implementation of IIoT and SPE.”

Thanks to its broad lineup, the SPE System Alliance already covers a large range of applications and fields of application: For example, within the automotive industry Ethernet systems are increasingly being employed within vehicles. Meanwhile, for the passive industrial cabling field of connectivity SPE can provide consistent IP communication from the field level right through to the corporate level, and therefore from the sensor through to the cloud. 

Further, in sensor technology, in addition to their use in classic automation technology, sensors are increasingly being integrated as intelligent data suppliers into IIoT applications via Ethernet networks. Due to the miniaturisation of the connection technology that has become possible with SPE, smaller sensors can also be connected to Ethernet networks. Combining SPE with the power supply over the data line means that additional plug connections to the voltage supply are no longer needed. Moreover, the use of SPE as the standard interface allows device manufacturers to provide an optimised range of devices with fewer versions.

The SPE System Alliance is an open platform for companies that want to further advance SPE technology on the market. Details and options for contacting the System Alliance are available on the website www.singlepairethernet.com

> [post_excerpt] =>

The technology partnership between Phoenix Contact, Weidmüller, Reichle & De-Massari (R&M), Fluke Networks, and Telegärtner for the Single Pair Ethernet (SPE) has progressed to create the SPE System Alliance. Find out more about this collaboration. [post_date_gmt] => 2020-05-27 09:27:29 [post_date] => 2020-05-27 09:27:29 [post_modified_gmt] => 2020-05-27 09:27:29 [post_modified] => 2020-05-27 09:27:29 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178673 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186686 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178673/Cross-industry-and-cross-application-alliance--for-Single-Pair-Ethernet-technology.aspx [syndication_item_hash] => e33982109f736a790d6ad2433a4c4b61 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

HART: Evolution in action

Array ( [post_title] => HART: Evolution in action [post_content] =>

HART: Evolution in action

Wally Pratt, director of HART technology at FieldComm Group, brings us up to date with developments of the HART Communication Protocol.

According to ARC research, as of 2018, the HART installed base represents over 60% of all field devices and over 90% of installed smart field devices – nearly 50 million units.  One of the key reasons that HART continues to dominate today is a constant focus on enhancing the technology in response to evolving market requirements.  

FieldComm Group’s HART technology working group will release Revision 7.7 of the standard this summer and this will include both clarifications and corrections along with enhancements to further optimise the protocol and add targeted useful features.

Major improvements to HART-IP are included in this release. Since its inception HART-IP has supported both field devices and I/O Systems (Remote I/O and WirelessHART Gateways). HART-IP enabled products have been shipping since 2009.   
With the emergence of initiatives like IIoT, Industry 4.0, and the NAMUR open architecture, interest in high-speed Ethernet to the plant floor is increasing.  Ethernet-APL, a 2-wire, 10Mbs, intrinsically safe physical layer is in development with products expected to be available in the next 18 months. Naturally, Ethernet-APL has driven growing interest in HART-IP enabled field devices. But like any ethernet protocol, security must be present and reliable. Notable among the enhancements included in Revision 7.7 are improvements to HART-IP security.

Security improvements
HART-IP has always mandated manufacturers support/supply security in their products. However, the minimum acceptable security suite was not specified. With revision 7.7, requirements for specific, minimum security suites are now specified. There are three legs to security specified – communication security, audit logs and syslogging.

Communication security requires new devices support the industry standard Internet Protocol (IP) Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS) suites. Since TLS and DTLS both have many options and choices, their application to HART-IP are tailored and clarified in HART-IP requirements. In addition, HART Commands have been added to simplify security deployment. 

Additional diagnostics and forensic requirements are also included. Devices are required to capture ‘Audit Logs’ that summarise communications activities. There are general security status and records for each client session (up to 128). Client session records include: client identification, connection start/stop times, whether the device configuration was changed in that session, etc. Audit Logs are useful in determining (for example) who and when an inadvertent change to the device was made.

HART-IP devices also must support ‘syslogging’. Syslogs are an industry standard means of publishing device events (to a network's Security Information and Event Management (SIEM) system. All HART-IP devices must support network time (using either NTP or PTP). Consequently, all syslog messages from all network devices are time synchronised, enabling forensics on network-wide behaviour and activities.

Combining communication security, audit logs and syslogging results in robust security for HART-IP enabled products.

Developer kit
As low-cost, 2-wire, Ethernet enabled solutions for field instrumentation near market availability, FieldComm Group is releasing a developer kit to enable field instrument manufacturers to learn about migrating from 4-20mA + HART to HART-IP. Based on the popular Raspberry PI (3B+) system, and using GitHub repositories, the HART-IP developer kit provides a path for process instrumentation manufacturers to prototype and demonstrate high speed HART-IP instruments with minimal engineering effort.  

Initially configured to work with power-over-ethernet POE solutions, the developer kit features a replaceable Ethernet module that will be upgraded to support 2-wire Ethernet-APL as components become available later this year.

Quality assurance
Finally, for developers, new releases of the HART and WirelessHART Tests systems are available. Two important new features are included in these releases: easier to use burst message testing and elimination of the need for commercial gateways when testing WirelessHART devices.  For users, this means improved operation of registered HART and WIrelessHART instruments.

In summary, FieldComm Group’s HART technology working group, along with FieldComm Group engineering staff continue to develop and enhance HART specifications, developer tools, and product registration tests that assure a positive return on end user investment in HART technology for the foreseeable future.

> [post_excerpt] =>

Wally Pratt, director of HART technology at FieldComm Group, brings us up to date with developments of the HART Communication Protocol. [post_date_gmt] => 2020-05-27 09:10:18 [post_date] => 2020-05-27 09:10:18 [post_modified_gmt] => 2020-05-27 09:10:18 [post_modified] => 2020-05-27 09:10:18 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178672 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186685 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178672/HART--Evolution-in-action.aspx [syndication_item_hash] => 554c8447663b1ac9483279f1812ceb25 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186685 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178672/HART--Evolution-in-action.aspx [syndication_item_hash] => 554c8447663b1ac9483279f1812ceb25 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=186685 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=186685 image/jpeg

Decide filter: Returning post, everything seems orderly :HART: Evolution in action

Array ( [post_title] => HART: Evolution in action [post_content] =>

HART: Evolution in action

Wally Pratt, director of HART technology at FieldComm Group, brings us up to date with developments of the HART Communication Protocol.

According to ARC research, as of 2018, the HART installed base represents over 60% of all field devices and over 90% of installed smart field devices – nearly 50 million units.  One of the key reasons that HART continues to dominate today is a constant focus on enhancing the technology in response to evolving market requirements.  

FieldComm Group’s HART technology working group will release Revision 7.7 of the standard this summer and this will include both clarifications and corrections along with enhancements to further optimise the protocol and add targeted useful features.

Major improvements to HART-IP are included in this release. Since its inception HART-IP has supported both field devices and I/O Systems (Remote I/O and WirelessHART Gateways). HART-IP enabled products have been shipping since 2009.   
With the emergence of initiatives like IIoT, Industry 4.0, and the NAMUR open architecture, interest in high-speed Ethernet to the plant floor is increasing.  Ethernet-APL, a 2-wire, 10Mbs, intrinsically safe physical layer is in development with products expected to be available in the next 18 months. Naturally, Ethernet-APL has driven growing interest in HART-IP enabled field devices. But like any ethernet protocol, security must be present and reliable. Notable among the enhancements included in Revision 7.7 are improvements to HART-IP security.

Security improvements
HART-IP has always mandated manufacturers support/supply security in their products. However, the minimum acceptable security suite was not specified. With revision 7.7, requirements for specific, minimum security suites are now specified. There are three legs to security specified – communication security, audit logs and syslogging.

Communication security requires new devices support the industry standard Internet Protocol (IP) Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS) suites. Since TLS and DTLS both have many options and choices, their application to HART-IP are tailored and clarified in HART-IP requirements. In addition, HART Commands have been added to simplify security deployment. 

Additional diagnostics and forensic requirements are also included. Devices are required to capture ‘Audit Logs’ that summarise communications activities. There are general security status and records for each client session (up to 128). Client session records include: client identification, connection start/stop times, whether the device configuration was changed in that session, etc. Audit Logs are useful in determining (for example) who and when an inadvertent change to the device was made.

HART-IP devices also must support ‘syslogging’. Syslogs are an industry standard means of publishing device events (to a network's Security Information and Event Management (SIEM) system. All HART-IP devices must support network time (using either NTP or PTP). Consequently, all syslog messages from all network devices are time synchronised, enabling forensics on network-wide behaviour and activities.

Combining communication security, audit logs and syslogging results in robust security for HART-IP enabled products.

Developer kit
As low-cost, 2-wire, Ethernet enabled solutions for field instrumentation near market availability, FieldComm Group is releasing a developer kit to enable field instrument manufacturers to learn about migrating from 4-20mA + HART to HART-IP. Based on the popular Raspberry PI (3B+) system, and using GitHub repositories, the HART-IP developer kit provides a path for process instrumentation manufacturers to prototype and demonstrate high speed HART-IP instruments with minimal engineering effort.  

Initially configured to work with power-over-ethernet POE solutions, the developer kit features a replaceable Ethernet module that will be upgraded to support 2-wire Ethernet-APL as components become available later this year.

Quality assurance
Finally, for developers, new releases of the HART and WirelessHART Tests systems are available. Two important new features are included in these releases: easier to use burst message testing and elimination of the need for commercial gateways when testing WirelessHART devices.  For users, this means improved operation of registered HART and WIrelessHART instruments.

In summary, FieldComm Group’s HART technology working group, along with FieldComm Group engineering staff continue to develop and enhance HART specifications, developer tools, and product registration tests that assure a positive return on end user investment in HART technology for the foreseeable future.

> [post_excerpt] =>

Wally Pratt, director of HART technology at FieldComm Group, brings us up to date with developments of the HART Communication Protocol. [post_date_gmt] => 2020-05-27 09:10:18 [post_date] => 2020-05-27 09:10:18 [post_modified_gmt] => 2020-05-27 09:10:18 [post_modified] => 2020-05-27 09:10:18 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178672 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186685 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178672/HART--Evolution-in-action.aspx [syndication_item_hash] => 554c8447663b1ac9483279f1812ceb25 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Manufacturers are leading the UK’s green recovery

Array ( [post_title] => Manufacturers are leading the UK’s green recovery [post_content] =>

Manufacturers are leading the UK’s green recovery

During the COVID-19 crisis, manufacturers have proven they can work in new, more sustainable ways. As industry looks to rebuild and grow after the lockdown, there is an opportunity to refocus on sustainability goals and work with Government to deliver a green recovery, according to a report from Make UK.

Research, undertaken by Make UK and energy company E.ON prior to the lockdown showed that sustainability and profitability go hand in hand: manufacturers who put sustainability at the heart of their businesses have seen real benefits from doing so in the last 12 months with 40% reporting increased profit margins and 30% increased competitiveness as a result. 

The report, ‘Towards a net-zero carbon UK manufacturing sector,’ takes the temperature of sustainability and energy efficiency progress in manufacturing and shows that 90% of manufacturers are aware of the 2050 net-zero target while almost half see this as a business opportunity which they are grasping as the roadmap to sustainable growth once the world opens up again.

Before COVID-19 and the global impacts hit, 30% said they have made real inroads into energy efficiency investments in the last 12 months, with the majority of the changes in relation to building improvement, equipment and manufacturing processes. Improving the energy efficiency of buildings was the second most impactful of technical measure for 11% of companies and was seen as a relatively simple step to take in the net-zero journey. Other simple measures which did not require major investments included buying energy from renewable sources, switching to LED lighting and control or replacing outdated equipment such as fans and pump systems.

Businesses revealed that one of the biggest barriers to moving further forward with major energy efficiencies is the cost of technology, further hampered by the fact that accessing available UK Government funding and grants is often difficult. Companies also said that better fiscal incentives to enable investments in energy saving technology would provide a further boost to activity in this area.  Despite this research being undertaken shortly before the COVID-19 crisis began, our recommendations remain even more valid and relevant in this context.

The study looked in detail at specific actions UK manufacturers have taken to respond to the net-zero target, with simpler measures some of the most popular across the sector. In the last 12 months, 40% of respondents have renegotiated their energy contracts and 65% were able to get a better deal. 

Businesses have invested to reduce energy consumption in manufacturing processes (54%) with a further 20% looking at this going forward, while others opted to generate part or all of their energy onsite (17%). Investment in more efficient equipment was seen as a quick fix with 71% of companies taking this action. Making this change in equipment was seen as the most impactful measure overall as almost a third (27%) of companies said the installation of energy saving technology had boosted their business. 

The majority of manufacturers (75%) understood the benefits of digitisation and over half (57%)  have already installed smart meters while  78%  collect their energy usage data. A further 13% plan to do so.  Monitoring power with Industrial Internet of Things (IIoT) sensors analyses each phase of the production process, indicates actual energy performance highlights consumption pain while taking actions to optimise costs, energy consumption and actual CO2 footprint. Businesses are now recognising this as one of the most important drivers to improvement and are putting in resource accordingly.

Companies told us they are also working closely with staff with two thirds (65%) of manufacturers already having introduced behavioural change activities to convince their employees to improve energy efficiency. Interestingly, shop floor level engagement is on the increase with half of shop-floor staff across companies of all sizes actively involved in energy management strategies. Office staff are the least bought in (43%) indicating a lack of awareness of the basic simple habit changes that could significantly reduce energy usage.
The main driver for implementing energy efficiency measures remains cost reduction, but improving company ethos is now seen as important as part of overall business strategy. Some 80% of board directors and senior management are engaged in energy efficiency, up from 50% in our sustainability survey last year.

CLICK HERE TO READ THE FULL REPORT

> [post_excerpt] =>

During the COVID-19 crisis, manufacturers have proven they can work in new, more sustainable ways. As industry looks to rebuild and grow after the lockdown, there is an opportunity to refocus on sustainability goals and work with Government to deliver a green recovery, according to a report from Make UK. [post_date_gmt] => 2020-05-27 09:04:41 [post_date] => 2020-05-27 09:04:41 [post_modified_gmt] => 2020-05-27 09:04:41 [post_modified] => 2020-05-27 09:04:41 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178671 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186684 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178671/Manufacturers-are-leading-the-UK-s-green-recovery.aspx [syndication_item_hash] => fc9910d4fe690dd4f052248aa98718b4 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186684 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178671/Manufacturers-are-leading-the-UK-s-green-recovery.aspx [syndication_item_hash] => fc9910d4fe690dd4f052248aa98718b4 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=186684 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=186684 image/jpeg

Decide filter: Returning post, everything seems orderly :Manufacturers are leading the UK’s green recovery

Array ( [post_title] => Manufacturers are leading the UK’s green recovery [post_content] =>

Manufacturers are leading the UK’s green recovery

During the COVID-19 crisis, manufacturers have proven they can work in new, more sustainable ways. As industry looks to rebuild and grow after the lockdown, there is an opportunity to refocus on sustainability goals and work with Government to deliver a green recovery, according to a report from Make UK.

Research, undertaken by Make UK and energy company E.ON prior to the lockdown showed that sustainability and profitability go hand in hand: manufacturers who put sustainability at the heart of their businesses have seen real benefits from doing so in the last 12 months with 40% reporting increased profit margins and 30% increased competitiveness as a result. 

The report, ‘Towards a net-zero carbon UK manufacturing sector,’ takes the temperature of sustainability and energy efficiency progress in manufacturing and shows that 90% of manufacturers are aware of the 2050 net-zero target while almost half see this as a business opportunity which they are grasping as the roadmap to sustainable growth once the world opens up again.

Before COVID-19 and the global impacts hit, 30% said they have made real inroads into energy efficiency investments in the last 12 months, with the majority of the changes in relation to building improvement, equipment and manufacturing processes. Improving the energy efficiency of buildings was the second most impactful of technical measure for 11% of companies and was seen as a relatively simple step to take in the net-zero journey. Other simple measures which did not require major investments included buying energy from renewable sources, switching to LED lighting and control or replacing outdated equipment such as fans and pump systems.

Businesses revealed that one of the biggest barriers to moving further forward with major energy efficiencies is the cost of technology, further hampered by the fact that accessing available UK Government funding and grants is often difficult. Companies also said that better fiscal incentives to enable investments in energy saving technology would provide a further boost to activity in this area.  Despite this research being undertaken shortly before the COVID-19 crisis began, our recommendations remain even more valid and relevant in this context.

The study looked in detail at specific actions UK manufacturers have taken to respond to the net-zero target, with simpler measures some of the most popular across the sector. In the last 12 months, 40% of respondents have renegotiated their energy contracts and 65% were able to get a better deal. 

Businesses have invested to reduce energy consumption in manufacturing processes (54%) with a further 20% looking at this going forward, while others opted to generate part or all of their energy onsite (17%). Investment in more efficient equipment was seen as a quick fix with 71% of companies taking this action. Making this change in equipment was seen as the most impactful measure overall as almost a third (27%) of companies said the installation of energy saving technology had boosted their business. 

The majority of manufacturers (75%) understood the benefits of digitisation and over half (57%)  have already installed smart meters while  78%  collect their energy usage data. A further 13% plan to do so.  Monitoring power with Industrial Internet of Things (IIoT) sensors analyses each phase of the production process, indicates actual energy performance highlights consumption pain while taking actions to optimise costs, energy consumption and actual CO2 footprint. Businesses are now recognising this as one of the most important drivers to improvement and are putting in resource accordingly.

Companies told us they are also working closely with staff with two thirds (65%) of manufacturers already having introduced behavioural change activities to convince their employees to improve energy efficiency. Interestingly, shop floor level engagement is on the increase with half of shop-floor staff across companies of all sizes actively involved in energy management strategies. Office staff are the least bought in (43%) indicating a lack of awareness of the basic simple habit changes that could significantly reduce energy usage.
The main driver for implementing energy efficiency measures remains cost reduction, but improving company ethos is now seen as important as part of overall business strategy. Some 80% of board directors and senior management are engaged in energy efficiency, up from 50% in our sustainability survey last year.

CLICK HERE TO READ THE FULL REPORT

> [post_excerpt] =>

During the COVID-19 crisis, manufacturers have proven they can work in new, more sustainable ways. As industry looks to rebuild and grow after the lockdown, there is an opportunity to refocus on sustainability goals and work with Government to deliver a green recovery, according to a report from Make UK. [post_date_gmt] => 2020-05-27 09:04:41 [post_date] => 2020-05-27 09:04:41 [post_modified_gmt] => 2020-05-27 09:04:41 [post_modified] => 2020-05-27 09:04:41 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178671 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186684 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178671/Manufacturers-are-leading-the-UK-s-green-recovery.aspx [syndication_item_hash] => fc9910d4fe690dd4f052248aa98718b4 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Smart sensors are key to revolutionising predictive maintenance in motor driven systems

Array ( [post_title] => Smart sensors are key to revolutionising predictive maintenance in motor driven systems [post_content] =>

Smart sensors are key to revolutionising predictive maintenance in motor driven systems

A new predictive maintenance focussed report from Interact Analysis (IA) highlights the potential for a new relationship between component manufacturers, OEM machine builders, and end users.

The report forecasts a boom in the sector, propelled by the emergence of smart sensors which are able to monitor crucial parts of a motor-driven system that are not covered by legacy maintenance devices and methods. Advanced smart sensors will allow delivery of viable cloud-based predictive maintenance service packages using a software as a service (SaaS) business model. 

The report shows that the market for predictive maintenance in 2019 was $117.5 million, largely made up from legacy predictive maintenance products such as portable monitoring devices. Many of these devices will maintain strong growth in the coming decade but will be used in tandem with new technologies such as smart sensors, the latter fuelling an expected boom in market value of predictive maintenance technology, up to almost $1 billion in 2024. 

Smart sensors, which typically monitor sound, temperature, and vibration, may not provide the depth of data offered by some legacy devices, but do have advantages. Whereas most legacy
devices are attached to motors, IA predicts that only 53% of smart sensors will be attached to motors by 2024. The rest will be attached to other machine components which are also subject to the wear and tear of daily use. This means that the application of predictive maintenance will be far more widespread in the factories of the future. 

Commenting on the report findings, Blake Griffin, lead analyst on predictive maintenance at Interact Analysis, said: “Smart sensor technology coupled with IIoT capabilities give component manufacturers and OEM machine builders the scope to offer end users an anticipatory service package. For most providers of predictive maintenance, the logical business model will be software as a service. A side benefit of SaaS is that it ties all technologies together under a single solution – thereby eliminating concerns regarding data ownership. Additionally, advancements in embedded machine learning will improve the ability for predictive maintenance to be installed in new or non-standard applications that are less well understood, further fuelling growth.”

> [post_excerpt] =>

A new predictive maintenance focussed report from Interact Analysis (IA) highlights the potential for a new relationship between component manufacturers, OEM machine builders, and end users. [post_date_gmt] => 2020-05-26 17:21:31 [post_date] => 2020-05-26 17:21:31 [post_modified_gmt] => 2020-05-26 17:21:31 [post_modified] => 2020-05-26 17:21:31 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178668 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186679 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178668/Smart-sensors-are-key-to-revolutionising-predictive-maintenance-in-motor-driven-systems.aspx [syndication_item_hash] => 41ebc48f39b0ec992cafd9c496034cfc ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186679 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178668/Smart-sensors-are-key-to-revolutionising-predictive-maintenance-in-motor-driven-systems.aspx [syndication_item_hash] => 41ebc48f39b0ec992cafd9c496034cfc )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=186679 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=186679 image/jpeg

Decide filter: Returning post, everything seems orderly :Smart sensors are key to revolutionising predictive maintenance in motor driven systems

Array ( [post_title] => Smart sensors are key to revolutionising predictive maintenance in motor driven systems [post_content] =>

Smart sensors are key to revolutionising predictive maintenance in motor driven systems

A new predictive maintenance focussed report from Interact Analysis (IA) highlights the potential for a new relationship between component manufacturers, OEM machine builders, and end users.

The report forecasts a boom in the sector, propelled by the emergence of smart sensors which are able to monitor crucial parts of a motor-driven system that are not covered by legacy maintenance devices and methods. Advanced smart sensors will allow delivery of viable cloud-based predictive maintenance service packages using a software as a service (SaaS) business model. 

The report shows that the market for predictive maintenance in 2019 was $117.5 million, largely made up from legacy predictive maintenance products such as portable monitoring devices. Many of these devices will maintain strong growth in the coming decade but will be used in tandem with new technologies such as smart sensors, the latter fuelling an expected boom in market value of predictive maintenance technology, up to almost $1 billion in 2024. 

Smart sensors, which typically monitor sound, temperature, and vibration, may not provide the depth of data offered by some legacy devices, but do have advantages. Whereas most legacy
devices are attached to motors, IA predicts that only 53% of smart sensors will be attached to motors by 2024. The rest will be attached to other machine components which are also subject to the wear and tear of daily use. This means that the application of predictive maintenance will be far more widespread in the factories of the future. 

Commenting on the report findings, Blake Griffin, lead analyst on predictive maintenance at Interact Analysis, said: “Smart sensor technology coupled with IIoT capabilities give component manufacturers and OEM machine builders the scope to offer end users an anticipatory service package. For most providers of predictive maintenance, the logical business model will be software as a service. A side benefit of SaaS is that it ties all technologies together under a single solution – thereby eliminating concerns regarding data ownership. Additionally, advancements in embedded machine learning will improve the ability for predictive maintenance to be installed in new or non-standard applications that are less well understood, further fuelling growth.”

> [post_excerpt] =>

A new predictive maintenance focussed report from Interact Analysis (IA) highlights the potential for a new relationship between component manufacturers, OEM machine builders, and end users. [post_date_gmt] => 2020-05-26 17:21:31 [post_date] => 2020-05-26 17:21:31 [post_modified_gmt] => 2020-05-26 17:21:31 [post_modified] => 2020-05-26 17:21:31 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178668 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186679 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178668/Smart-sensors-are-key-to-revolutionising-predictive-maintenance-in-motor-driven-systems.aspx [syndication_item_hash] => 41ebc48f39b0ec992cafd9c496034cfc [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

New cobot with easy handling features

Array ( [post_title] => New cobot with easy handling features [post_content] =>

New cobot with easy handling features

A new collaborative robot from Mitsubishi Electric has been developed to work alongside human operators without the need for guards or safety fences, while meeting new requirements for adequate distancing of workers in manufacturing sites.

The MELFA ASSISTA cobot meets the needs of both standard industrial and environmentally sensitive applications – for example, it can be supplied with certified NSF H1 grease (National Sanitation Foundation guidelines) for applications such as the food and beverage sector. 

It can perform complex and delicate assembly tasks, precise work holding or repetitive pick and place operations with high levels of consistency and reliability. Application examples include working alongside human operators in automotive assembly tasks or performing packaging operations on production lines. 

Set-up of the cobot is via direct teach functionality where the user holds the arm and moves it to each required position; the position is then saved by pressing a button on the keypad built into the cobot arm. This complements the visual programming software used for more complex operations ¬– the RT Visualbox package allows for both drag and drop motion functions and individual adjustments to each movement. This means that costs for additional robot programming can be saved, as operators can alter set ups without specialised robot expertise. 

The MELFA ASSISTA cobot has repeat accuracy of ±0.03mm by a rated payload of 5kg and reach radius of 910mm. It enables increased product quality, which correspondingly reduces the time overhead required for quality control. 

Another benefit of the cobot is its ability to switch between collaborative mode – where it operates at the slower speeds typical of a cobot – and a higher speed mode for use in a more industrial ‘cooperative production’ environment. This ensures maximum application flexibility, and delivers the best possible return on investment. 

The new cobot meets all relevant safety requirements as defined under ISO 10218-1 and ISO / TS 15066. Fault diagnostics and operational state are also shown by a 6 colour LED ring mounted around the robot’s forearm which is always visible.

> [post_excerpt] =>

A new collaborative robot from Mitsubishi Electric has been developed to work alongside human operators without the need for guards or safety fences, while meeting new requirements for adequate distancing of workers in manufacturing sites. [post_date_gmt] => 2020-05-26 17:17:20 [post_date] => 2020-05-26 17:17:20 [post_modified_gmt] => 2020-05-26 17:17:20 [post_modified] => 2020-05-26 17:17:20 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178667 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186678 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178667/New-cobot-with-easy-handling-features.aspx [syndication_item_hash] => 9e379b9a387d97f15b388cbf4f39a03a ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186678 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178667/New-cobot-with-easy-handling-features.aspx [syndication_item_hash] => 9e379b9a387d97f15b388cbf4f39a03a )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=186678 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=186678 image/jpeg

Decide filter: Returning post, everything seems orderly :New cobot with easy handling features

Array ( [post_title] => New cobot with easy handling features [post_content] =>

New cobot with easy handling features

A new collaborative robot from Mitsubishi Electric has been developed to work alongside human operators without the need for guards or safety fences, while meeting new requirements for adequate distancing of workers in manufacturing sites.

The MELFA ASSISTA cobot meets the needs of both standard industrial and environmentally sensitive applications – for example, it can be supplied with certified NSF H1 grease (National Sanitation Foundation guidelines) for applications such as the food and beverage sector. 

It can perform complex and delicate assembly tasks, precise work holding or repetitive pick and place operations with high levels of consistency and reliability. Application examples include working alongside human operators in automotive assembly tasks or performing packaging operations on production lines. 

Set-up of the cobot is via direct teach functionality where the user holds the arm and moves it to each required position; the position is then saved by pressing a button on the keypad built into the cobot arm. This complements the visual programming software used for more complex operations ¬– the RT Visualbox package allows for both drag and drop motion functions and individual adjustments to each movement. This means that costs for additional robot programming can be saved, as operators can alter set ups without specialised robot expertise. 

The MELFA ASSISTA cobot has repeat accuracy of ±0.03mm by a rated payload of 5kg and reach radius of 910mm. It enables increased product quality, which correspondingly reduces the time overhead required for quality control. 

Another benefit of the cobot is its ability to switch between collaborative mode – where it operates at the slower speeds typical of a cobot – and a higher speed mode for use in a more industrial ‘cooperative production’ environment. This ensures maximum application flexibility, and delivers the best possible return on investment. 

The new cobot meets all relevant safety requirements as defined under ISO 10218-1 and ISO / TS 15066. Fault diagnostics and operational state are also shown by a 6 colour LED ring mounted around the robot’s forearm which is always visible.

> [post_excerpt] =>

A new collaborative robot from Mitsubishi Electric has been developed to work alongside human operators without the need for guards or safety fences, while meeting new requirements for adequate distancing of workers in manufacturing sites. [post_date_gmt] => 2020-05-26 17:17:20 [post_date] => 2020-05-26 17:17:20 [post_modified_gmt] => 2020-05-26 17:17:20 [post_modified] => 2020-05-26 17:17:20 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178667 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186678 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178667/New-cobot-with-easy-handling-features.aspx [syndication_item_hash] => 9e379b9a387d97f15b388cbf4f39a03a [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Discovering the full potential of servo drives

Array ( [post_title] => Discovering the full potential of servo drives [post_content] =>

Discovering the full potential of servo drives

A new developer kit from Festo enables system designers and machine builders to familiarise themselves with the functions and application possibilities of the company’s CMMT servo drives.

The Festo CMMT developer kit allows users to explore the ease of installation, networking capabilities and simple commissioning software which is available to help specify the configuration of the best servo drive for an application.

Festo’s CMMT range of servo drives includes the high power CMMT-AS and the miniature CMMT-ST, which needs less than half the installation space. The developer kit provides users with a risk-free application development tool that enables them to try out CMMT servo drive capabilities and evaluate the connectivity available through Festo’s Automation Suite at their own pace. It also enables easy replication across the range functionally at a very low initial outlay.

The developer-kit contains the CMMT-ST extra low voltage servo drive controller; an EMMS-ST-42 servo motor; 1.5m encoder cable and 1.5m motor cable. 

The CMMT-ST servo drive controller aims to make connectivity simple. Users choose between EtherCAT, PROFINET, EtherNet/IP and Modbus protocols to integrate the CMMT servo drive seamlessly into the system environment of their chosen PLC. Necessary plug-ins and function blocks are provided – at no additional cost – for integration into host systems such as Festo, Siemens, Beckhoff, Rockwell and Omron environments.

> [post_excerpt] =>

A new developer kit from Festo enables system designers and machine builders to familiarise themselves with the functions and application possibilities of the company’s CMMT servo drives. [post_date_gmt] => 2020-05-26 17:09:06 [post_date] => 2020-05-26 17:09:06 [post_modified_gmt] => 2020-05-26 17:09:06 [post_modified] => 2020-05-26 17:09:06 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178666 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186677 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178666/Discovering-the-full-potential-of-servo-drives.aspx [syndication_item_hash] => 236cc4100490585019071a15927d9b21 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186677 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178666/Discovering-the-full-potential-of-servo-drives.aspx [syndication_item_hash] => 236cc4100490585019071a15927d9b21 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=186677 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=186677 image/jpeg

Decide filter: Returning post, everything seems orderly :Discovering the full potential of servo drives

Array ( [post_title] => Discovering the full potential of servo drives [post_content] =>

Discovering the full potential of servo drives

A new developer kit from Festo enables system designers and machine builders to familiarise themselves with the functions and application possibilities of the company’s CMMT servo drives.

The Festo CMMT developer kit allows users to explore the ease of installation, networking capabilities and simple commissioning software which is available to help specify the configuration of the best servo drive for an application.

Festo’s CMMT range of servo drives includes the high power CMMT-AS and the miniature CMMT-ST, which needs less than half the installation space. The developer kit provides users with a risk-free application development tool that enables them to try out CMMT servo drive capabilities and evaluate the connectivity available through Festo’s Automation Suite at their own pace. It also enables easy replication across the range functionally at a very low initial outlay.

The developer-kit contains the CMMT-ST extra low voltage servo drive controller; an EMMS-ST-42 servo motor; 1.5m encoder cable and 1.5m motor cable. 

The CMMT-ST servo drive controller aims to make connectivity simple. Users choose between EtherCAT, PROFINET, EtherNet/IP and Modbus protocols to integrate the CMMT servo drive seamlessly into the system environment of their chosen PLC. Necessary plug-ins and function blocks are provided – at no additional cost – for integration into host systems such as Festo, Siemens, Beckhoff, Rockwell and Omron environments.

> [post_excerpt] =>

A new developer kit from Festo enables system designers and machine builders to familiarise themselves with the functions and application possibilities of the company’s CMMT servo drives. [post_date_gmt] => 2020-05-26 17:09:06 [post_date] => 2020-05-26 17:09:06 [post_modified_gmt] => 2020-05-26 17:09:06 [post_modified] => 2020-05-26 17:09:06 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178666 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186677 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178666/Discovering-the-full-potential-of-servo-drives.aspx [syndication_item_hash] => 236cc4100490585019071a15927d9b21 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Connecting Siemens controllers with software applications

Array ( [post_title] => Connecting Siemens controllers with software applications [post_content] =>

Connecting Siemens controllers with software applications

Softing Industrial’s edgeConnector Siemens connects Siemens controllers with software applications. It supports the reference architectures for Industrial IoT by Microsoft Azure and Amazon AWS, as well as independent edge solutions.

edgeConnector Siemens is said to enable access to SIMATIC S7-1200 and S7-1500 data including optimised data blocks. Client applications have access to data via the interoperability standard OPC UA. The product can be configured locally via a built-in web interface, or remotely via a REST interface. 

It seamlessly integrates with Azure IoT Edge and AWS IoT Greengrass and is made available via online repositories such as Docker Hub. 

Process and machine data are made available for IoT applications without the need to make any changes to controller or automation network configuration. Advanced security features, such as the management of access right for individual client applications, increase the security of the entire solution. 

> [post_excerpt] =>

Softing Industrial’s edgeConnector Siemens connects Siemens controllers with software applications. It supports the reference architectures for Industrial IoT by Microsoft Azure and Amazon AWS, as well as independent edge solutions. [post_date_gmt] => 2020-05-26 17:01:16 [post_date] => 2020-05-26 17:01:16 [post_modified_gmt] => 2020-05-26 17:01:16 [post_modified] => 2020-05-26 17:01:16 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178665 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186676 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178665/Connecting-Siemens-controllers-with-software-applications.aspx [syndication_item_hash] => f9e2a0eac2f0d05f6789f48d6960f99a ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186676 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178665/Connecting-Siemens-controllers-with-software-applications.aspx [syndication_item_hash] => f9e2a0eac2f0d05f6789f48d6960f99a )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=186676 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=186676 image/jpeg

Decide filter: Returning post, everything seems orderly :Connecting Siemens controllers with software applications

Array ( [post_title] => Connecting Siemens controllers with software applications [post_content] =>

Connecting Siemens controllers with software applications

Softing Industrial’s edgeConnector Siemens connects Siemens controllers with software applications. It supports the reference architectures for Industrial IoT by Microsoft Azure and Amazon AWS, as well as independent edge solutions.

edgeConnector Siemens is said to enable access to SIMATIC S7-1200 and S7-1500 data including optimised data blocks. Client applications have access to data via the interoperability standard OPC UA. The product can be configured locally via a built-in web interface, or remotely via a REST interface. 

It seamlessly integrates with Azure IoT Edge and AWS IoT Greengrass and is made available via online repositories such as Docker Hub. 

Process and machine data are made available for IoT applications without the need to make any changes to controller or automation network configuration. Advanced security features, such as the management of access right for individual client applications, increase the security of the entire solution. 

> [post_excerpt] =>

Softing Industrial’s edgeConnector Siemens connects Siemens controllers with software applications. It supports the reference architectures for Industrial IoT by Microsoft Azure and Amazon AWS, as well as independent edge solutions. [post_date_gmt] => 2020-05-26 17:01:16 [post_date] => 2020-05-26 17:01:16 [post_modified_gmt] => 2020-05-26 17:01:16 [post_modified] => 2020-05-26 17:01:16 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178665 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186676 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178665/Connecting-Siemens-controllers-with-software-applications.aspx [syndication_item_hash] => f9e2a0eac2f0d05f6789f48d6960f99a [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Emerson to invest in flow measurement innovation Centre

Array ( [post_title] => Emerson to invest in flow measurement innovation Centre [post_content] =>

Emerson to invest in flow measurement innovation Centre

Emerson is investing over $100 million to expand its manufacturing space and launch a new innovation centre in the US which will be focused on research, new product development and industry training for its flow measurement products.

Commenting on the investment, David N. Farr, chairman and chief executive officer of Emerson, said: “This US investment significantly expands our ability to serve as industry leaders, helping customers in essential industries optimise their operations with the latest technologies.”

The new innovation centre will drive innovation and new product development to enable customers in the life sciences, food and beverage, chemical, power and energy industries to realise performance improvements in production, reliability, safety and sustainability.

The expansion will include a new laboratory and manufacturing facility to design and develop products, technologies and software that measure and control the flow of material in a manufacturing process –core components of Emerson’s Plantweb digital ecosystem, a scalable portfolio of technologies, software and services that are said to help digitally transform operations and achieve top quartile performance.

> [post_excerpt] =>

Emerson is investing over $100 million to expand its manufacturing space and launch a new innovation centre in the US which will be focused on research, new product development and industry training for its flow measurement products. [post_date_gmt] => 2020-05-22 11:49:32 [post_date] => 2020-05-22 11:49:32 [post_modified_gmt] => 2020-05-22 11:49:32 [post_modified] => 2020-05-22 11:49:32 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178634 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186644 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178634/Emerson-to-invest-in-flow-measurement-innovation-Centre.aspx [syndication_item_hash] => a49e62ecca20c8fd3177093ee628991a ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186644 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178634/Emerson-to-invest-in-flow-measurement-innovation-Centre.aspx [syndication_item_hash] => a49e62ecca20c8fd3177093ee628991a )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=186644 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=186644 image/jpeg

Decide filter: Returning post, everything seems orderly :Emerson to invest in flow measurement innovation Centre

Array ( [post_title] => Emerson to invest in flow measurement innovation Centre [post_content] =>

Emerson to invest in flow measurement innovation Centre

Emerson is investing over $100 million to expand its manufacturing space and launch a new innovation centre in the US which will be focused on research, new product development and industry training for its flow measurement products.

Commenting on the investment, David N. Farr, chairman and chief executive officer of Emerson, said: “This US investment significantly expands our ability to serve as industry leaders, helping customers in essential industries optimise their operations with the latest technologies.”

The new innovation centre will drive innovation and new product development to enable customers in the life sciences, food and beverage, chemical, power and energy industries to realise performance improvements in production, reliability, safety and sustainability.

The expansion will include a new laboratory and manufacturing facility to design and develop products, technologies and software that measure and control the flow of material in a manufacturing process –core components of Emerson’s Plantweb digital ecosystem, a scalable portfolio of technologies, software and services that are said to help digitally transform operations and achieve top quartile performance.

> [post_excerpt] =>

Emerson is investing over $100 million to expand its manufacturing space and launch a new innovation centre in the US which will be focused on research, new product development and industry training for its flow measurement products. [post_date_gmt] => 2020-05-22 11:49:32 [post_date] => 2020-05-22 11:49:32 [post_modified_gmt] => 2020-05-22 11:49:32 [post_modified] => 2020-05-22 11:49:32 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178634 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186644 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178634/Emerson-to-invest-in-flow-measurement-innovation-Centre.aspx [syndication_item_hash] => a49e62ecca20c8fd3177093ee628991a [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Joining forces to deliver IoT modules for smart applications

Array ( [post_title] => Joining forces to deliver IoT modules for smart applications [post_content] =>

Joining forces to deliver IoT modules for smart applications

Arrow Electronics, Panasonic Industry, and STMicroelectronics (ST) have jointly introduced a low-power wireless multi-sensor edge-intelligence solution for smart factory, smart home and smart life applications.

The IoT Solution Module combines Arrow’s engineering and global distribution capabilities with Panasonic Industry’s IoT modules based on the ST BlueTile (STEVAL-BCN002V1B) multi-sensor development kit. This combination enables customers to test their ideas easily and bring new IoT products to the market faster. 

The IoT Solution Module features ST’s latest BlueNRG Bluetooth Low Energy 5.0 system-on-chip paired with numerous inertial, environmental, and audio sensors. The onboard sensors enable the cost-effective delivery of a range of compact and valuable IoT applications. 

Comprehensive services and validation processes enable a reduced bill of materials that combines an accelerometer and gyroscope with Time-of-Flight, pressure, and humidity sensors in an efficient low-power design with Bluetooth communications. This combination enables OEM customers to dramatically slash time-to-market and reduce design expense and complexity using certified modules. 

> [post_excerpt] =>

Arrow Electronics, Panasonic Industry, and STMicroelectronics (ST) have jointly introduced a low-power wireless multi-sensor edge-intelligence solution for smart factory, smart home and smart life applications. [post_date_gmt] => 2020-05-22 11:36:26 [post_date] => 2020-05-22 11:36:26 [post_modified_gmt] => 2020-05-22 11:36:26 [post_modified] => 2020-05-22 11:36:26 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178633 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186643 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178633/Joining-forces-to-deliver-IoT-modules-for-smart-applications.aspx [syndication_item_hash] => 1b219692764861164448b5281247a1f8 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186643 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178633/Joining-forces-to-deliver-IoT-modules-for-smart-applications.aspx [syndication_item_hash] => 1b219692764861164448b5281247a1f8 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=186643 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=186643 image/jpeg

Decide filter: Returning post, everything seems orderly :Joining forces to deliver IoT modules for smart applications

Array ( [post_title] => Joining forces to deliver IoT modules for smart applications [post_content] =>

Joining forces to deliver IoT modules for smart applications

Arrow Electronics, Panasonic Industry, and STMicroelectronics (ST) have jointly introduced a low-power wireless multi-sensor edge-intelligence solution for smart factory, smart home and smart life applications.

The IoT Solution Module combines Arrow’s engineering and global distribution capabilities with Panasonic Industry’s IoT modules based on the ST BlueTile (STEVAL-BCN002V1B) multi-sensor development kit. This combination enables customers to test their ideas easily and bring new IoT products to the market faster. 

The IoT Solution Module features ST’s latest BlueNRG Bluetooth Low Energy 5.0 system-on-chip paired with numerous inertial, environmental, and audio sensors. The onboard sensors enable the cost-effective delivery of a range of compact and valuable IoT applications. 

Comprehensive services and validation processes enable a reduced bill of materials that combines an accelerometer and gyroscope with Time-of-Flight, pressure, and humidity sensors in an efficient low-power design with Bluetooth communications. This combination enables OEM customers to dramatically slash time-to-market and reduce design expense and complexity using certified modules. 

> [post_excerpt] =>

Arrow Electronics, Panasonic Industry, and STMicroelectronics (ST) have jointly introduced a low-power wireless multi-sensor edge-intelligence solution for smart factory, smart home and smart life applications. [post_date_gmt] => 2020-05-22 11:36:26 [post_date] => 2020-05-22 11:36:26 [post_modified_gmt] => 2020-05-22 11:36:26 [post_modified] => 2020-05-22 11:36:26 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178633 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186643 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178633/Joining-forces-to-deliver-IoT-modules-for-smart-applications.aspx [syndication_item_hash] => 1b219692764861164448b5281247a1f8 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Discover the latest engineering innovations from HARTING

Array ( [post_title] => Discover the latest engineering innovations from HARTING [post_content] =>

Discover the latest engineering innovations from HARTING

The HARTING Experts Camp is a series of webinars where our specialists will introduce cutting-edge products, future technologies and other key engineering topics. Register now and learn more about the Han® Configurator, an online 3D tool which allows you to design and build an industrial connector, and connector miniaturisation via the ix Industrial®, a robust Ethernet interface which provides compact products with perfect high data transmission rates.

> [post_excerpt] =>

The HARTING Experts Camp is a series of webinars where our specialists will introduce cutting-edge products, future technologies and other key engineering topics. Register now and learn more about the Han® Configurator, an online 3D tool which allows you to design and build an industrial connector, and connector miniaturisation via the ix Industrial®, a robust Ethernet interface which provides compact products with perfect high data transmission rates. [post_date_gmt] => 2020-05-22 11:13:57 [post_date] => 2020-05-22 11:13:57 [post_modified_gmt] => 2020-05-22 11:13:57 [post_modified] => 2020-05-22 11:13:57 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178631 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186641 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178631/Discover-the-latest-engineering-innovations-from-HARTING.aspx [syndication_item_hash] => 48a852229c26a15a8a3432735cd47441 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186641 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178631/Discover-the-latest-engineering-innovations-from-HARTING.aspx [syndication_item_hash] => 48a852229c26a15a8a3432735cd47441 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=186641 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=186641 image/jpeg

Decide filter: Returning post, everything seems orderly :Discover the latest engineering innovations from HARTING

Array ( [post_title] => Discover the latest engineering innovations from HARTING [post_content] =>

Discover the latest engineering innovations from HARTING

The HARTING Experts Camp is a series of webinars where our specialists will introduce cutting-edge products, future technologies and other key engineering topics. Register now and learn more about the Han® Configurator, an online 3D tool which allows you to design and build an industrial connector, and connector miniaturisation via the ix Industrial®, a robust Ethernet interface which provides compact products with perfect high data transmission rates.

> [post_excerpt] =>

The HARTING Experts Camp is a series of webinars where our specialists will introduce cutting-edge products, future technologies and other key engineering topics. Register now and learn more about the Han® Configurator, an online 3D tool which allows you to design and build an industrial connector, and connector miniaturisation via the ix Industrial®, a robust Ethernet interface which provides compact products with perfect high data transmission rates. [post_date_gmt] => 2020-05-22 11:13:57 [post_date] => 2020-05-22 11:13:57 [post_modified_gmt] => 2020-05-22 11:13:57 [post_modified] => 2020-05-22 11:13:57 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => CEE-178631 [meta] => Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=186641 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/178631/Discover-the-latest-engineering-innovations-from-HARTING.aspx [syndication_item_hash] => 48a852229c26a15a8a3432735cd47441 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( ) [post_format] => Array ( ) ) )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedlink.class.php on line 302

Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Raw materials to achieve better balance between economic and ecological performance at K 2016

Array ( [post_title] => Raw materials to achieve better balance between economic and ecological performance at K 2016 [post_content] => [post_date_gmt] => 2016-10-01 00:00:00 [post_date] => 2016-10-01 00:00:00 [post_modified_gmt] => 2016-10-01 00:00:00 [post_modified] => 2016-10-01 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-sep-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-sep-16.html [syndication_item_hash] => 722f387e702f7afd955ce651c0e63fb7 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-sep-16.html [syndication_item_hash] => 722f387e702f7afd955ce651c0e63fb7 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Raw materials to achieve better balance between economic and ecological performance at K 2016

Array ( [post_title] => Raw materials to achieve better balance between economic and ecological performance at K 2016 [post_content] => [post_date_gmt] => 2016-10-01 00:00:00 [post_date] => 2016-10-01 00:00:00 [post_modified_gmt] => 2016-10-01 00:00:00 [post_modified] => 2016-10-01 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-sep-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-sep-16.html [syndication_item_hash] => 722f387e702f7afd955ce651c0e63fb7 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Developments in polymer composites to create opportunities for global medical composite market

Array ( [post_title] => Developments in polymer composites to create opportunities for global medical composite market [post_content] => [post_date_gmt] => 2016-08-30 00:00:00 [post_date] => 2016-08-30 00:00:00 [post_modified_gmt] => 2016-08-30 00:00:00 [post_modified] => 2016-08-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-aug-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-aug-16.html [syndication_item_hash] => 6cebc90ea90f983209c6e0f2c8900449 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-aug-16.html [syndication_item_hash] => 6cebc90ea90f983209c6e0f2c8900449 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Developments in polymer composites to create opportunities for global medical composite market

Array ( [post_title] => Developments in polymer composites to create opportunities for global medical composite market [post_content] => [post_date_gmt] => 2016-08-30 00:00:00 [post_date] => 2016-08-30 00:00:00 [post_modified_gmt] => 2016-08-30 00:00:00 [post_modified] => 2016-08-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-aug-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-aug-16.html [syndication_item_hash] => 6cebc90ea90f983209c6e0f2c8900449 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Anti-bacterial packaging doubles perishable food shelf-life, Zinc packaging reduces bacteria by 97%

Array ( [post_title] => Anti-bacterial packaging doubles perishable food shelf-life, Zinc packaging reduces bacteria by 97% [post_content] => [post_date_gmt] => 2016-07-29 00:00:00 [post_date] => 2016-07-29 00:00:00 [post_modified_gmt] => 2016-07-29 00:00:00 [post_modified] => 2016-07-29 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-july-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-july-16.html [syndication_item_hash] => 1f94fe1cbd34094504ea53218b384011 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-july-16.html [syndication_item_hash] => 1f94fe1cbd34094504ea53218b384011 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Anti-bacterial packaging doubles perishable food shelf-life, Zinc packaging reduces bacteria by 97%

Array ( [post_title] => Anti-bacterial packaging doubles perishable food shelf-life, Zinc packaging reduces bacteria by 97% [post_content] => [post_date_gmt] => 2016-07-29 00:00:00 [post_date] => 2016-07-29 00:00:00 [post_modified_gmt] => 2016-07-29 00:00:00 [post_modified] => 2016-07-29 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-july-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-july-16.html [syndication_item_hash] => 1f94fe1cbd34094504ea53218b384011 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Asia Pacific to drive flexible electronics market estimated to cross US$87000 mln by 2024

Array ( [post_title] => Asia Pacific to drive flexible electronics market estimated to cross US$87000 mln by 2024 [post_content] => [post_date_gmt] => 2016-06-30 00:00:00 [post_date] => 2016-06-30 00:00:00 [post_modified_gmt] => 2016-06-30 00:00:00 [post_modified] => 2016-06-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-june-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-june-16.html [syndication_item_hash] => 3849a3c506394fcc326e48ee823c77ae ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-june-16.html [syndication_item_hash] => 3849a3c506394fcc326e48ee823c77ae )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Asia Pacific to drive flexible electronics market estimated to cross US$87000 mln by 2024

Array ( [post_title] => Asia Pacific to drive flexible electronics market estimated to cross US$87000 mln by 2024 [post_content] => [post_date_gmt] => 2016-06-30 00:00:00 [post_date] => 2016-06-30 00:00:00 [post_modified_gmt] => 2016-06-30 00:00:00 [post_modified] => 2016-06-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-june-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-june-16.html [syndication_item_hash] => 3849a3c506394fcc326e48ee823c77ae [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

US imports to meet LatAms growing PE demand, Europe to continue high PE imports from Middle East

Array ( [post_title] => US imports to meet LatAms growing PE demand, Europe to continue high PE imports from Middle East [post_content] => [post_date_gmt] => 2016-05-31 00:00:00 [post_date] => 2016-05-31 00:00:00 [post_modified_gmt] => 2016-05-31 00:00:00 [post_modified] => 2016-05-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-may-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-may-16.html [syndication_item_hash] => 5cedbb93765bdfaefd4234f83f4f0df7 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-may-16.html [syndication_item_hash] => 5cedbb93765bdfaefd4234f83f4f0df7 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :US imports to meet LatAms growing PE demand, Europe to continue high PE imports from Middle East

Array ( [post_title] => US imports to meet LatAms growing PE demand, Europe to continue high PE imports from Middle East [post_content] => [post_date_gmt] => 2016-05-31 00:00:00 [post_date] => 2016-05-31 00:00:00 [post_modified_gmt] => 2016-05-31 00:00:00 [post_modified] => 2016-05-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-may-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-may-16.html [syndication_item_hash] => 5cedbb93765bdfaefd4234f83f4f0df7 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Double digit growth in 3D printing offers manufacturing of complex designs a reality

Array ( [post_title] => Double digit growth in 3D printing offers manufacturing of complex designs a reality [post_content] => [post_date_gmt] => 2016-04-30 00:00:00 [post_date] => 2016-04-30 00:00:00 [post_modified_gmt] => 2016-04-30 00:00:00 [post_modified] => 2016-04-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-april-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-april-16.html [syndication_item_hash] => 445121e6f81658e0c141b4ca57085a00 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-april-16.html [syndication_item_hash] => 445121e6f81658e0c141b4ca57085a00 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Double digit growth in 3D printing offers manufacturing of complex designs a reality

Array ( [post_title] => Double digit growth in 3D printing offers manufacturing of complex designs a reality [post_content] => [post_date_gmt] => 2016-04-30 00:00:00 [post_date] => 2016-04-30 00:00:00 [post_modified_gmt] => 2016-04-30 00:00:00 [post_modified] => 2016-04-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-april-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-april-16.html [syndication_item_hash] => 445121e6f81658e0c141b4ca57085a00 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Growth of packaging and automotive in Asia Pacific to drive global polypropylene demand

Array ( [post_title] => Growth of packaging and automotive in Asia Pacific to drive global polypropylene demand [post_content] => [post_date_gmt] => 2016-03-31 00:00:00 [post_date] => 2016-03-31 00:00:00 [post_modified_gmt] => 2016-03-31 00:00:00 [post_modified] => 2016-03-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-march-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-march-16.html [syndication_item_hash] => 40f650775075d2d96f40db5d4401fe2a ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-march-16.html [syndication_item_hash] => 40f650775075d2d96f40db5d4401fe2a )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Growth of packaging and automotive in Asia Pacific to drive global polypropylene demand

Array ( [post_title] => Growth of packaging and automotive in Asia Pacific to drive global polypropylene demand [post_content] => [post_date_gmt] => 2016-03-31 00:00:00 [post_date] => 2016-03-31 00:00:00 [post_modified_gmt] => 2016-03-31 00:00:00 [post_modified] => 2016-03-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-march-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-march-16.html [syndication_item_hash] => 40f650775075d2d96f40db5d4401fe2a [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Driven by food & beverage labelling, global synthetic paper market to grow by 2019

Array ( [post_title] => Driven by food & beverage labelling, global synthetic paper market to grow by 2019 [post_content] => [post_date_gmt] => 2016-02-29 00:00:00 [post_date] => 2016-02-29 00:00:00 [post_modified_gmt] => 2016-02-29 00:00:00 [post_modified] => 2016-02-29 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-28-february-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-28-february-16.html [syndication_item_hash] => 8bca621424fa2170c88e265c48cd28a8 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-28-february-16.html [syndication_item_hash] => 8bca621424fa2170c88e265c48cd28a8 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Driven by food & beverage labelling, global synthetic paper market to grow by 2019

Array ( [post_title] => Driven by food & beverage labelling, global synthetic paper market to grow by 2019 [post_content] => [post_date_gmt] => 2016-02-29 00:00:00 [post_date] => 2016-02-29 00:00:00 [post_modified_gmt] => 2016-02-29 00:00:00 [post_modified] => 2016-02-29 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-28-february-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-28-february-16.html [syndication_item_hash] => 8bca621424fa2170c88e265c48cd28a8 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Products from wood and natural fibre composites are sustainable, offer a natural look and feel

Array ( [post_title] => Products from wood and natural fibre composites are sustainable, offer a natural look and feel [post_content] => [post_date_gmt] => 2016-01-30 00:00:00 [post_date] => 2016-01-30 00:00:00 [post_modified_gmt] => 2016-01-30 00:00:00 [post_modified] => 2016-01-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-jan-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-jan-16.html [syndication_item_hash] => 3803f97717aac054d4320a5c2d12abf8 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-jan-16.html [syndication_item_hash] => 3803f97717aac054d4320a5c2d12abf8 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Products from wood and natural fibre composites are sustainable, offer a natural look and feel

Array ( [post_title] => Products from wood and natural fibre composites are sustainable, offer a natural look and feel [post_content] => [post_date_gmt] => 2016-01-30 00:00:00 [post_date] => 2016-01-30 00:00:00 [post_modified_gmt] => 2016-01-30 00:00:00 [post_modified] => 2016-01-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-jan-16.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-jan-16.html [syndication_item_hash] => 3803f97717aac054d4320a5c2d12abf8 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Petrochemical and Polymer Industry 2015, A Challenging Year for the Global Economy

Array ( [post_title] => Petrochemical and Polymer Industry 2015, A Challenging Year for the Global Economy [post_content] => [post_date_gmt] => 2015-12-31 00:00:00 [post_date] => 2015-12-31 00:00:00 [post_modified_gmt] => 2015-12-31 00:00:00 [post_modified] => 2015-12-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-dec-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-dec-15.html [syndication_item_hash] => ffd6bcbae9fdfcbbd0ac16f9951d4ac3 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-dec-15.html [syndication_item_hash] => ffd6bcbae9fdfcbbd0ac16f9951d4ac3 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Petrochemical and Polymer Industry 2015, A Challenging Year for the Global Economy

Array ( [post_title] => Petrochemical and Polymer Industry 2015, A Challenging Year for the Global Economy [post_content] => [post_date_gmt] => 2015-12-31 00:00:00 [post_date] => 2015-12-31 00:00:00 [post_modified_gmt] => 2015-12-31 00:00:00 [post_modified] => 2015-12-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-dec-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-dec-15.html [syndication_item_hash] => ffd6bcbae9fdfcbbd0ac16f9951d4ac3 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Advances in global thermoplastic elastomers market to be driven by ongoing product innovations

Array ( [post_title] => Advances in global thermoplastic elastomers market to be driven by ongoing product innovations [post_content] => [post_date_gmt] => 2015-12-01 00:00:00 [post_date] => 2015-12-01 00:00:00 [post_modified_gmt] => 2015-12-01 00:00:00 [post_modified] => 2015-12-01 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-november-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-november-15.html [syndication_item_hash] => 79d5b631c630bec754071d38c5e954f1 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-november-15.html [syndication_item_hash] => 79d5b631c630bec754071d38c5e954f1 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Advances in global thermoplastic elastomers market to be driven by ongoing product innovations

Array ( [post_title] => Advances in global thermoplastic elastomers market to be driven by ongoing product innovations [post_content] => [post_date_gmt] => 2015-12-01 00:00:00 [post_date] => 2015-12-01 00:00:00 [post_modified_gmt] => 2015-12-01 00:00:00 [post_modified] => 2015-12-01 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-november-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-november-15.html [syndication_item_hash] => 79d5b631c630bec754071d38c5e954f1 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Global agricultural films market to grow at over 5.5% on increasing demand from Asia-Pacific

Array ( [post_title] => Global agricultural films market to grow at over 5.5% on increasing demand from Asia-Pacific [post_content] => [post_date_gmt] => 2015-10-30 00:00:00 [post_date] => 2015-10-30 00:00:00 [post_modified_gmt] => 2015-10-30 00:00:00 [post_modified] => 2015-10-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-october-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-october-15.html [syndication_item_hash] => 6ca97d14ed2f60c2be3049da862278c4 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-october-15.html [syndication_item_hash] => 6ca97d14ed2f60c2be3049da862278c4 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Global agricultural films market to grow at over 5.5% on increasing demand from Asia-Pacific

Array ( [post_title] => Global agricultural films market to grow at over 5.5% on increasing demand from Asia-Pacific [post_content] => [post_date_gmt] => 2015-10-30 00:00:00 [post_date] => 2015-10-30 00:00:00 [post_modified_gmt] => 2015-10-30 00:00:00 [post_modified] => 2015-10-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-october-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-october-15.html [syndication_item_hash] => 6ca97d14ed2f60c2be3049da862278c4 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Styrenic polymers market for medical applications to register CAGR of 7.5% uptil decade-end

Array ( [post_title] => Styrenic polymers market for medical applications to register CAGR of 7.5% uptil decade-end [post_content] => [post_date_gmt] => 2015-09-30 00:00:00 [post_date] => 2015-09-30 00:00:00 [post_modified_gmt] => 2015-09-30 00:00:00 [post_modified] => 2015-09-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-september-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-september-15.html [syndication_item_hash] => 39d5302f25be8c0efc01529036d1577b ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-september-15.html [syndication_item_hash] => 39d5302f25be8c0efc01529036d1577b )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Styrenic polymers market for medical applications to register CAGR of 7.5% uptil decade-end

Array ( [post_title] => Styrenic polymers market for medical applications to register CAGR of 7.5% uptil decade-end [post_content] => [post_date_gmt] => 2015-09-30 00:00:00 [post_date] => 2015-09-30 00:00:00 [post_modified_gmt] => 2015-09-30 00:00:00 [post_modified] => 2015-09-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-september-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-september-15.html [syndication_item_hash] => 39d5302f25be8c0efc01529036d1577b [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Urbanization, rising incomes in Asia Pacific leads growth in global flame retardant market

Array ( [post_title] => Urbanization, rising incomes in Asia Pacific leads growth in global flame retardant market [post_content] => [post_date_gmt] => 2015-08-31 00:00:00 [post_date] => 2015-08-31 00:00:00 [post_modified_gmt] => 2015-08-31 00:00:00 [post_modified] => 2015-08-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-sep-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-sep-15.html [syndication_item_hash] => f26e892a5feddb9730793a1455a9fed3 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-sep-15.html [syndication_item_hash] => f26e892a5feddb9730793a1455a9fed3 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Urbanization, rising incomes in Asia Pacific leads growth in global flame retardant market

Array ( [post_title] => Urbanization, rising incomes in Asia Pacific leads growth in global flame retardant market [post_content] => [post_date_gmt] => 2015-08-31 00:00:00 [post_date] => 2015-08-31 00:00:00 [post_modified_gmt] => 2015-08-31 00:00:00 [post_modified] => 2015-08-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-sep-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-sep-15.html [syndication_item_hash] => f26e892a5feddb9730793a1455a9fed3 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Biobased polymer capacity to triple to 17 mln tons in 2020- PET, PLA, PHA to show fastest growth

Array ( [post_title] => Biobased polymer capacity to triple to 17 mln tons in 2020- PET, PLA, PHA to show fastest growth [post_content] => [post_date_gmt] => 2015-07-30 00:00:00 [post_date] => 2015-07-30 00:00:00 [post_modified_gmt] => 2015-07-30 00:00:00 [post_modified] => 2015-07-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-aug-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-aug-15.html [syndication_item_hash] => 2e9728f27efdb314c1609628b5545ff3 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-aug-15.html [syndication_item_hash] => 2e9728f27efdb314c1609628b5545ff3 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Biobased polymer capacity to triple to 17 mln tons in 2020- PET, PLA, PHA to show fastest growth

Array ( [post_title] => Biobased polymer capacity to triple to 17 mln tons in 2020- PET, PLA, PHA to show fastest growth [post_content] => [post_date_gmt] => 2015-07-30 00:00:00 [post_date] => 2015-07-30 00:00:00 [post_modified_gmt] => 2015-07-30 00:00:00 [post_modified] => 2015-07-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-aug-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-aug-15.html [syndication_item_hash] => 2e9728f27efdb314c1609628b5545ff3 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Escalating demand from Asia Pacific to drive growth of global flexible packaging till decade-end

Array ( [post_title] => Escalating demand from Asia Pacific to drive growth of global flexible packaging till decade-end [post_content] => [post_date_gmt] => 2015-06-30 00:00:00 [post_date] => 2015-06-30 00:00:00 [post_modified_gmt] => 2015-06-30 00:00:00 [post_modified] => 2015-06-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-july-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-july-15.html [syndication_item_hash] => 81fb4d258eb9e1c69545c799afca11bc ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-july-15.html [syndication_item_hash] => 81fb4d258eb9e1c69545c799afca11bc )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Escalating demand from Asia Pacific to drive growth of global flexible packaging till decade-end

Array ( [post_title] => Escalating demand from Asia Pacific to drive growth of global flexible packaging till decade-end [post_content] => [post_date_gmt] => 2015-06-30 00:00:00 [post_date] => 2015-06-30 00:00:00 [post_modified_gmt] => 2015-06-30 00:00:00 [post_modified] => 2015-06-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-july-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-july-15.html [syndication_item_hash] => 81fb4d258eb9e1c69545c799afca11bc [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Growing use of polymers to drive global petrochemicals demand at CAGR of 6.8% uptil 2020

Array ( [post_title] => Growing use of polymers to drive global petrochemicals demand at CAGR of 6.8% uptil 2020 [post_content] => [post_date_gmt] => 2015-05-30 00:00:00 [post_date] => 2015-05-30 00:00:00 [post_modified_gmt] => 2015-05-30 00:00:00 [post_modified] => 2015-05-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-jun-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-jun-15.html [syndication_item_hash] => d9615dc59c14b7b7bc40b4fd2927086f ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-jun-15.html [syndication_item_hash] => d9615dc59c14b7b7bc40b4fd2927086f )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Growing use of polymers to drive global petrochemicals demand at CAGR of 6.8% uptil 2020

Array ( [post_title] => Growing use of polymers to drive global petrochemicals demand at CAGR of 6.8% uptil 2020 [post_content] => [post_date_gmt] => 2015-05-30 00:00:00 [post_date] => 2015-05-30 00:00:00 [post_modified_gmt] => 2015-05-30 00:00:00 [post_modified] => 2015-05-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-jun-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-jun-15.html [syndication_item_hash] => d9615dc59c14b7b7bc40b4fd2927086f [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Driven by APAC demand, antimicrobial plastic market to grow at CAGR of 10% until end of decade

Array ( [post_title] => Driven by APAC demand, antimicrobial plastic market to grow at CAGR of 10% until end of decade [post_content] => [post_date_gmt] => 2015-04-30 00:00:00 [post_date] => 2015-04-30 00:00:00 [post_modified_gmt] => 2015-04-30 00:00:00 [post_modified] => 2015-04-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-may-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-may-15.html [syndication_item_hash] => 2b14711f7f30645eaeb22a987fc3ce65 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-may-15.html [syndication_item_hash] => 2b14711f7f30645eaeb22a987fc3ce65 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Driven by APAC demand, antimicrobial plastic market to grow at CAGR of 10% until end of decade

Array ( [post_title] => Driven by APAC demand, antimicrobial plastic market to grow at CAGR of 10% until end of decade [post_content] => [post_date_gmt] => 2015-04-30 00:00:00 [post_date] => 2015-04-30 00:00:00 [post_modified_gmt] => 2015-04-30 00:00:00 [post_modified] => 2015-04-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-may-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-may-15.html [syndication_item_hash] => 2b14711f7f30645eaeb22a987fc3ce65 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Developments in bioploymers aid development of compostable food and beverage packaging

Array ( [post_title] => Developments in bioploymers aid development of compostable food and beverage packaging [post_content] => [post_date_gmt] => 2015-03-31 00:00:00 [post_date] => 2015-03-31 00:00:00 [post_modified_gmt] => 2015-03-31 00:00:00 [post_modified] => 2015-03-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-apr-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-apr-15.html [syndication_item_hash] => 098130ab65f5b3ebee686b3fb78dd889 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-apr-15.html [syndication_item_hash] => 098130ab65f5b3ebee686b3fb78dd889 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Developments in bioploymers aid development of compostable food and beverage packaging

Array ( [post_title] => Developments in bioploymers aid development of compostable food and beverage packaging [post_content] => [post_date_gmt] => 2015-03-31 00:00:00 [post_date] => 2015-03-31 00:00:00 [post_modified_gmt] => 2015-03-31 00:00:00 [post_modified] => 2015-03-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-apr-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-apr-15.html [syndication_item_hash] => 098130ab65f5b3ebee686b3fb78dd889 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Phase Change Material technology in two wheeler seat covers controls microclimate of human body

Array ( [post_title] => Phase Change Material technology in two wheeler seat covers controls microclimate of human body [post_content] => [post_date_gmt] => 2015-02-27 00:00:00 [post_date] => 2015-02-27 00:00:00 [post_modified_gmt] => 2015-02-27 00:00:00 [post_modified] => 2015-02-27 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-march-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-march-15.html [syndication_item_hash] => c551fd70b282dc899d87e6eef0d2db65 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-march-15.html [syndication_item_hash] => c551fd70b282dc899d87e6eef0d2db65 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Phase Change Material technology in two wheeler seat covers controls microclimate of human body

Array ( [post_title] => Phase Change Material technology in two wheeler seat covers controls microclimate of human body [post_content] => [post_date_gmt] => 2015-02-27 00:00:00 [post_date] => 2015-02-27 00:00:00 [post_modified_gmt] => 2015-02-27 00:00:00 [post_modified] => 2015-02-27 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-march-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-march-15.html [syndication_item_hash] => c551fd70b282dc899d87e6eef0d2db65 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Global metal substitution drives robust growth of global engineering plastics market

Array ( [post_title] => Global metal substitution drives robust growth of global engineering plastics market [post_content] => [post_date_gmt] => 2015-02-02 00:00:00 [post_date] => 2015-02-02 00:00:00 [post_modified_gmt] => 2015-02-02 00:00:00 [post_modified] => 2015-02-02 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-jan-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-jan-15.html [syndication_item_hash] => b93066c1aa553ac7cbea4d44402b11a1 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-jan-15.html [syndication_item_hash] => b93066c1aa553ac7cbea4d44402b11a1 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Global metal substitution drives robust growth of global engineering plastics market

Array ( [post_title] => Global metal substitution drives robust growth of global engineering plastics market [post_content] => [post_date_gmt] => 2015-02-02 00:00:00 [post_date] => 2015-02-02 00:00:00 [post_modified_gmt] => 2015-02-02 00:00:00 [post_modified] => 2015-02-02 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-jan-15.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-jan-15.html [syndication_item_hash] => b93066c1aa553ac7cbea4d44402b11a1 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Will plunging oil lead to overall boost in global economy by delivering windfall to..

Array ( [post_title] => Will plunging oil lead to overall boost in global economy by delivering windfall to.. [post_content] => [post_date_gmt] => 2014-12-30 00:00:00 [post_date] => 2014-12-30 00:00:00 [post_modified_gmt] => 2014-12-30 00:00:00 [post_modified] => 2014-12-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-dec-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-dec-14.html [syndication_item_hash] => 2445cc42f9142880f5292849dd694a5b ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-dec-14.html [syndication_item_hash] => 2445cc42f9142880f5292849dd694a5b )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Will plunging oil lead to overall boost in global economy by delivering windfall to..

Array ( [post_title] => Will plunging oil lead to overall boost in global economy by delivering windfall to.. [post_content] => [post_date_gmt] => 2014-12-30 00:00:00 [post_date] => 2014-12-30 00:00:00 [post_modified_gmt] => 2014-12-30 00:00:00 [post_modified] => 2014-12-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-dec-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-dec-14.html [syndication_item_hash] => 2445cc42f9142880f5292849dd694a5b [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Global demand for polyethylene to rise 4% pa to almost 100 mln tons in 2018

Array ( [post_title] => Global demand for polyethylene to rise 4% pa to almost 100 mln tons in 2018 [post_content] => [post_date_gmt] => 2014-12-13 00:00:00 [post_date] => 2014-12-13 00:00:00 [post_modified_gmt] => 2014-12-13 00:00:00 [post_modified] => 2014-12-13 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-dec-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-dec-14.html [syndication_item_hash] => 5895d04e7140e6910dc2b31681896d3f ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-dec-14.html [syndication_item_hash] => 5895d04e7140e6910dc2b31681896d3f )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Global demand for polyethylene to rise 4% pa to almost 100 mln tons in 2018

Array ( [post_title] => Global demand for polyethylene to rise 4% pa to almost 100 mln tons in 2018 [post_content] => [post_date_gmt] => 2014-12-13 00:00:00 [post_date] => 2014-12-13 00:00:00 [post_modified_gmt] => 2014-12-13 00:00:00 [post_modified] => 2014-12-13 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-dec-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-dec-14.html [syndication_item_hash] => 5895d04e7140e6910dc2b31681896d3f [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Trends affecting growth of polymer usage in medical device markets

Array ( [post_title] => Trends affecting growth of polymer usage in medical device markets [post_content] => [post_date_gmt] => 2014-11-28 00:00:00 [post_date] => 2014-11-28 00:00:00 [post_modified_gmt] => 2014-11-28 00:00:00 [post_modified] => 2014-11-28 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-dec-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-dec-14.html [syndication_item_hash] => 4af083100993dae981d1273efd3a1c04 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-dec-14.html [syndication_item_hash] => 4af083100993dae981d1273efd3a1c04 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Trends affecting growth of polymer usage in medical device markets

Array ( [post_title] => Trends affecting growth of polymer usage in medical device markets [post_content] => [post_date_gmt] => 2014-11-28 00:00:00 [post_date] => 2014-11-28 00:00:00 [post_modified_gmt] => 2014-11-28 00:00:00 [post_modified] => 2014-11-28 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-dec-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-1-dec-14.html [syndication_item_hash] => 4af083100993dae981d1273efd3a1c04 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Brand protection with anti-counterfeiting resins, percept technologies with TPEs, taggant

Array ( [post_title] => Brand protection with anti-counterfeiting resins, percept technologies with TPEs, taggant [post_content] => [post_date_gmt] => 2014-11-14 00:00:00 [post_date] => 2014-11-14 00:00:00 [post_modified_gmt] => 2014-11-14 00:00:00 [post_modified] => 2014-11-14 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-nov-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-nov-14.html [syndication_item_hash] => 1b0929bfe6889db09b4f52f437940812 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-nov-14.html [syndication_item_hash] => 1b0929bfe6889db09b4f52f437940812 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Brand protection with anti-counterfeiting resins, percept technologies with TPEs, taggant

Array ( [post_title] => Brand protection with anti-counterfeiting resins, percept technologies with TPEs, taggant [post_content] => [post_date_gmt] => 2014-11-14 00:00:00 [post_date] => 2014-11-14 00:00:00 [post_modified_gmt] => 2014-11-14 00:00:00 [post_modified] => 2014-11-14 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-nov-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-nov-14.html [syndication_item_hash] => 1b0929bfe6889db09b4f52f437940812 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Shale gas developments in USA to impact growth in polyethylene film usage and global trade

Array ( [post_title] => Shale gas developments in USA to impact growth in polyethylene film usage and global trade [post_content] => [post_date_gmt] => 2014-10-31 00:00:00 [post_date] => 2014-10-31 00:00:00 [post_modified_gmt] => 2014-10-31 00:00:00 [post_modified] => 2014-10-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-oct-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-oct-14.html [syndication_item_hash] => 3f3964fc528e634613f389654ebc3f5e ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-oct-14.html [syndication_item_hash] => 3f3964fc528e634613f389654ebc3f5e )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Shale gas developments in USA to impact growth in polyethylene film usage and global trade

Array ( [post_title] => Shale gas developments in USA to impact growth in polyethylene film usage and global trade [post_content] => [post_date_gmt] => 2014-10-31 00:00:00 [post_date] => 2014-10-31 00:00:00 [post_modified_gmt] => 2014-10-31 00:00:00 [post_modified] => 2014-10-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-oct-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-oct-14.html [syndication_item_hash] => 3f3964fc528e634613f389654ebc3f5e [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Flexible packaging, solar industry to drive global demand for specialty and high performance films

Array ( [post_title] => Flexible packaging, solar industry to drive global demand for specialty and high performance films [post_content] => [post_date_gmt] => 2014-10-13 00:00:00 [post_date] => 2014-10-13 00:00:00 [post_modified_gmt] => 2014-10-13 00:00:00 [post_modified] => 2014-10-13 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-oct-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-oct-14.html [syndication_item_hash] => 39937aefd353099e0cd6145d14f3d210 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-oct-14.html [syndication_item_hash] => 39937aefd353099e0cd6145d14f3d210 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Flexible packaging, solar industry to drive global demand for specialty and high performance films

Array ( [post_title] => Flexible packaging, solar industry to drive global demand for specialty and high performance films [post_content] => [post_date_gmt] => 2014-10-13 00:00:00 [post_date] => 2014-10-13 00:00:00 [post_modified_gmt] => 2014-10-13 00:00:00 [post_modified] => 2014-10-13 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-oct-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-oct-14.html [syndication_item_hash] => 39937aefd353099e0cd6145d14f3d210 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Increase in global propylene production by 2030 prompts radical shift in supply relationships

Array ( [post_title] => Increase in global propylene production by 2030 prompts radical shift in supply relationships [post_content] => [post_date_gmt] => 2014-09-30 00:00:00 [post_date] => 2014-09-30 00:00:00 [post_modified_gmt] => 2014-09-30 00:00:00 [post_modified] => 2014-09-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-sep-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-sep-14.html [syndication_item_hash] => 713cf220aca241a821769ae1d3980ac0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-sep-14.html [syndication_item_hash] => 713cf220aca241a821769ae1d3980ac0 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Increase in global propylene production by 2030 prompts radical shift in supply relationships

Array ( [post_title] => Increase in global propylene production by 2030 prompts radical shift in supply relationships [post_content] => [post_date_gmt] => 2014-09-30 00:00:00 [post_date] => 2014-09-30 00:00:00 [post_modified_gmt] => 2014-09-30 00:00:00 [post_modified] => 2014-09-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-sep-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-sep-14.html [syndication_item_hash] => 713cf220aca241a821769ae1d3980ac0 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

US shale gas changing dynamics in petrochemical industry of Asia, Latin America, Middle East

Array ( [post_title] => US shale gas changing dynamics in petrochemical industry of Asia, Latin America, Middle East [post_content] => [post_date_gmt] => 2014-09-15 00:00:00 [post_date] => 2014-09-15 00:00:00 [post_modified_gmt] => 2014-09-15 00:00:00 [post_modified] => 2014-09-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-sep-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-sep-14.html [syndication_item_hash] => 85f193dd7e2c2d9bb59d54799e4b9fcb ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-sep-14.html [syndication_item_hash] => 85f193dd7e2c2d9bb59d54799e4b9fcb )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :US shale gas changing dynamics in petrochemical industry of Asia, Latin America, Middle East

Array ( [post_title] => US shale gas changing dynamics in petrochemical industry of Asia, Latin America, Middle East [post_content] => [post_date_gmt] => 2014-09-15 00:00:00 [post_date] => 2014-09-15 00:00:00 [post_modified_gmt] => 2014-09-15 00:00:00 [post_modified] => 2014-09-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-sep-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-sep-14.html [syndication_item_hash] => 85f193dd7e2c2d9bb59d54799e4b9fcb [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

N. America, Europe, APAC, to drive super absorbent polymers market past US$8 bln by end of decade

Array ( [post_title] => N. America, Europe, APAC, to drive super absorbent polymers market past US$8 bln by end of decade [post_content] => [post_date_gmt] => 2014-09-01 00:00:00 [post_date] => 2014-09-01 00:00:00 [post_modified_gmt] => 2014-09-01 00:00:00 [post_modified] => 2014-09-01 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-aug-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-aug-14.html [syndication_item_hash] => 88c5b4535f608ab5dbcedfa813f7225b ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-aug-14.html [syndication_item_hash] => 88c5b4535f608ab5dbcedfa813f7225b )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :N. America, Europe, APAC, to drive super absorbent polymers market past US$8 bln by end of decade

Array ( [post_title] => N. America, Europe, APAC, to drive super absorbent polymers market past US$8 bln by end of decade [post_content] => [post_date_gmt] => 2014-09-01 00:00:00 [post_date] => 2014-09-01 00:00:00 [post_modified_gmt] => 2014-09-01 00:00:00 [post_modified] => 2014-09-01 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-aug-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-aug-14.html [syndication_item_hash] => 88c5b4535f608ab5dbcedfa813f7225b [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

W Europe, USA to drive biodegradable plastic packaging demand to US$8415 mln by 2019

Array ( [post_title] => W Europe, USA to drive biodegradable plastic packaging demand to US$8415 mln by 2019 [post_content] => [post_date_gmt] => 2014-08-15 00:00:00 [post_date] => 2014-08-15 00:00:00 [post_modified_gmt] => 2014-08-15 00:00:00 [post_modified] => 2014-08-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-aug-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-aug-14.html [syndication_item_hash] => ad476553129d1d43a011576bb0627561 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-aug-14.html [syndication_item_hash] => ad476553129d1d43a011576bb0627561 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :W Europe, USA to drive biodegradable plastic packaging demand to US$8415 mln by 2019

Array ( [post_title] => W Europe, USA to drive biodegradable plastic packaging demand to US$8415 mln by 2019 [post_content] => [post_date_gmt] => 2014-08-15 00:00:00 [post_date] => 2014-08-15 00:00:00 [post_modified_gmt] => 2014-08-15 00:00:00 [post_modified] => 2014-08-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-aug-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-aug-14.html [syndication_item_hash] => ad476553129d1d43a011576bb0627561 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

With a growing middle class and rise in urbanization, Asia to drive global olefin demand

Array ( [post_title] => With a growing middle class and rise in urbanization, Asia to drive global olefin demand [post_content] => [post_date_gmt] => 2014-08-01 00:00:00 [post_date] => 2014-08-01 00:00:00 [post_modified_gmt] => 2014-08-01 00:00:00 [post_modified] => 2014-08-01 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-july-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-july-14.html [syndication_item_hash] => f8a60ad0ba38ef6a468a65b3f8867d77 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-july-14.html [syndication_item_hash] => f8a60ad0ba38ef6a468a65b3f8867d77 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :With a growing middle class and rise in urbanization, Asia to drive global olefin demand

Array ( [post_title] => With a growing middle class and rise in urbanization, Asia to drive global olefin demand [post_content] => [post_date_gmt] => 2014-08-01 00:00:00 [post_date] => 2014-08-01 00:00:00 [post_modified_gmt] => 2014-08-01 00:00:00 [post_modified] => 2014-08-01 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-july-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-july-14.html [syndication_item_hash] => f8a60ad0ba38ef6a468a65b3f8867d77 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Global Medical Polymer market to grow over 5% till 2020

Array ( [post_title] => Global Medical Polymer market to grow over 5% till 2020 [post_content] => [post_date_gmt] => 2014-07-15 00:00:00 [post_date] => 2014-07-15 00:00:00 [post_modified_gmt] => 2014-07-15 00:00:00 [post_modified] => 2014-07-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-july-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-july-14.html [syndication_item_hash] => 32ba1de488f1ffc84d311399255e1b62 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-july-14.html [syndication_item_hash] => 32ba1de488f1ffc84d311399255e1b62 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Global Medical Polymer market to grow over 5% till 2020

Array ( [post_title] => Global Medical Polymer market to grow over 5% till 2020 [post_content] => [post_date_gmt] => 2014-07-15 00:00:00 [post_date] => 2014-07-15 00:00:00 [post_modified_gmt] => 2014-07-15 00:00:00 [post_modified] => 2014-07-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-july-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-july-14.html [syndication_item_hash] => 32ba1de488f1ffc84d311399255e1b62 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Global PolyLactic Acid and Lactic Acid market forecast to see robust growth to 2020.

Array ( [post_title] => Global PolyLactic Acid and Lactic Acid market forecast to see robust growth to 2020. [post_content] => [post_date_gmt] => 2014-07-01 00:00:00 [post_date] => 2014-07-01 00:00:00 [post_modified_gmt] => 2014-07-01 00:00:00 [post_modified] => 2014-07-01 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-june-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-june-14.html [syndication_item_hash] => 5f8ceac0e7bc50cbbd5b14f28045387b ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-june-14.html [syndication_item_hash] => 5f8ceac0e7bc50cbbd5b14f28045387b )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Global PolyLactic Acid and Lactic Acid market forecast to see robust growth to 2020.

Array ( [post_title] => Global PolyLactic Acid and Lactic Acid market forecast to see robust growth to 2020. [post_content] => [post_date_gmt] => 2014-07-01 00:00:00 [post_date] => 2014-07-01 00:00:00 [post_modified_gmt] => 2014-07-01 00:00:00 [post_modified] => 2014-07-01 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-june-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-june-14.html [syndication_item_hash] => 5f8ceac0e7bc50cbbd5b14f28045387b [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Global market for stabilizers to increase to US$5.3 bln in 2021

Array ( [post_title] => Global market for stabilizers to increase to US$5.3 bln in 2021 [post_content] => [post_date_gmt] => 2014-06-17 00:00:00 [post_date] => 2014-06-17 00:00:00 [post_modified_gmt] => 2014-06-17 00:00:00 [post_modified] => 2014-06-17 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-june-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-june-14.html [syndication_item_hash] => 1ef5decd9bf7313b28be9950b9c1a076 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-june-14.html [syndication_item_hash] => 1ef5decd9bf7313b28be9950b9c1a076 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Global market for stabilizers to increase to US$5.3 bln in 2021

Array ( [post_title] => Global market for stabilizers to increase to US$5.3 bln in 2021 [post_content] => [post_date_gmt] => 2014-06-17 00:00:00 [post_date] => 2014-06-17 00:00:00 [post_modified_gmt] => 2014-06-17 00:00:00 [post_modified] => 2014-06-17 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-june-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-june-14.html [syndication_item_hash] => 1ef5decd9bf7313b28be9950b9c1a076 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

First new polymers discovered in 20 years, Ninja polymers safely destroy bacteria

Array ( [post_title] => First new polymers discovered in 20 years, Ninja polymers safely destroy bacteria [post_content] => [post_date_gmt] => 2014-05-31 00:00:00 [post_date] => 2014-05-31 00:00:00 [post_modified_gmt] => 2014-05-31 00:00:00 [post_modified] => 2014-05-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-may-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-may-14.html [syndication_item_hash] => 4dcf548d74758e880194aec05a5cd3aa ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-may-14.html [syndication_item_hash] => 4dcf548d74758e880194aec05a5cd3aa )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :First new polymers discovered in 20 years, Ninja polymers safely destroy bacteria

Array ( [post_title] => First new polymers discovered in 20 years, Ninja polymers safely destroy bacteria [post_content] => [post_date_gmt] => 2014-05-31 00:00:00 [post_date] => 2014-05-31 00:00:00 [post_modified_gmt] => 2014-05-31 00:00:00 [post_modified] => 2014-05-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-may-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-31-may-14.html [syndication_item_hash] => 4dcf548d74758e880194aec05a5cd3aa [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Balance of power in BOPP film markets shifting from India and Middle East to China

Array ( [post_title] => Balance of power in BOPP film markets shifting from India and Middle East to China [post_content] => [post_date_gmt] => 2014-05-15 00:00:00 [post_date] => 2014-05-15 00:00:00 [post_modified_gmt] => 2014-05-15 00:00:00 [post_modified] => 2014-05-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-may-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-may-14.html [syndication_item_hash] => fba1d690487a42462957a1d8f6a6e181 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-may-14.html [syndication_item_hash] => fba1d690487a42462957a1d8f6a6e181 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Balance of power in BOPP film markets shifting from India and Middle East to China

Array ( [post_title] => Balance of power in BOPP film markets shifting from India and Middle East to China [post_content] => [post_date_gmt] => 2014-05-15 00:00:00 [post_date] => 2014-05-15 00:00:00 [post_modified_gmt] => 2014-05-15 00:00:00 [post_modified] => 2014-05-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-may-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-may-14.html [syndication_item_hash] => fba1d690487a42462957a1d8f6a6e181 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Use of Performance Plastics in the European Automotive market to reach US$7.26 bln in 2019

Array ( [post_title] => Use of Performance Plastics in the European Automotive market to reach US$7.26 bln in 2019 [post_content] => [post_date_gmt] => 2014-04-30 00:00:00 [post_date] => 2014-04-30 00:00:00 [post_modified_gmt] => 2014-04-30 00:00:00 [post_modified] => 2014-04-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-april-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-april-14.html [syndication_item_hash] => c12ae62061e4cc604abb94c6ec2ee4ba ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-april-14.html [syndication_item_hash] => c12ae62061e4cc604abb94c6ec2ee4ba )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Use of Performance Plastics in the European Automotive market to reach US$7.26 bln in 2019

Array ( [post_title] => Use of Performance Plastics in the European Automotive market to reach US$7.26 bln in 2019 [post_content] => [post_date_gmt] => 2014-04-30 00:00:00 [post_date] => 2014-04-30 00:00:00 [post_modified_gmt] => 2014-04-30 00:00:00 [post_modified] => 2014-04-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-april-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-30-april-14.html [syndication_item_hash] => c12ae62061e4cc604abb94c6ec2ee4ba [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Global plastic processing machine market to continue upward curve through 2017

Array ( [post_title] => Global plastic processing machine market to continue upward curve through 2017 [post_content] => [post_date_gmt] => 2014-04-15 00:00:00 [post_date] => 2014-04-15 00:00:00 [post_modified_gmt] => 2014-04-15 00:00:00 [post_modified] => 2014-04-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-april-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-april-14.html [syndication_item_hash] => 3c2b82a469b7c531de56e1bd84608867 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-april-14.html [syndication_item_hash] => 3c2b82a469b7c531de56e1bd84608867 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Global plastic processing machine market to continue upward curve through 2017

Array ( [post_title] => Global plastic processing machine market to continue upward curve through 2017 [post_content] => [post_date_gmt] => 2014-04-15 00:00:00 [post_date] => 2014-04-15 00:00:00 [post_modified_gmt] => 2014-04-15 00:00:00 [post_modified] => 2014-04-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-april-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/Upload/Newsletter/plastics-newsletter-15-april-14.html [syndication_item_hash] => 3c2b82a469b7c531de56e1bd84608867 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Emerging markets to produce 50% global ethylene, depending on local access to feedstocks, demand

Array ( [post_title] => Emerging markets to produce 50% global ethylene, depending on local access to feedstocks, demand [post_content] => [post_date_gmt] => 2014-04-02 00:00:00 [post_date] => 2014-04-02 00:00:00 [post_modified_gmt] => 2014-04-02 00:00:00 [post_modified] => 2014-04-02 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-march-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-march-14.html [syndication_item_hash] => 268515596bea5b564d2e0cc576cb4c19 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-march-14.html [syndication_item_hash] => 268515596bea5b564d2e0cc576cb4c19 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Emerging markets to produce 50% global ethylene, depending on local access to feedstocks, demand

Array ( [post_title] => Emerging markets to produce 50% global ethylene, depending on local access to feedstocks, demand [post_content] => [post_date_gmt] => 2014-04-02 00:00:00 [post_date] => 2014-04-02 00:00:00 [post_modified_gmt] => 2014-04-02 00:00:00 [post_modified] => 2014-04-02 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-march-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-march-14.html [syndication_item_hash] => 268515596bea5b564d2e0cc576cb4c19 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Advances in polymers improve aviation safety- conductive coatings, conducting nano tubes

Array ( [post_title] => Advances in polymers improve aviation safety- conductive coatings, conducting nano tubes [post_content] => [post_date_gmt] => 2014-03-14 00:00:00 [post_date] => 2014-03-14 00:00:00 [post_modified_gmt] => 2014-03-14 00:00:00 [post_modified] => 2014-03-14 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-march-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-march-14.html [syndication_item_hash] => 2e5b258452cdf586c6fdca2ffee051d1 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-march-14.html [syndication_item_hash] => 2e5b258452cdf586c6fdca2ffee051d1 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Advances in polymers improve aviation safety- conductive coatings, conducting nano tubes

Array ( [post_title] => Advances in polymers improve aviation safety- conductive coatings, conducting nano tubes [post_content] => [post_date_gmt] => 2014-03-14 00:00:00 [post_date] => 2014-03-14 00:00:00 [post_modified_gmt] => 2014-03-14 00:00:00 [post_modified] => 2014-03-14 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-march-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-march-14.html [syndication_item_hash] => 2e5b258452cdf586c6fdca2ffee051d1 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Plastic films & sheets market to reach 70.9 mln tons by 2018 led by demand from food & pharma packag

Array ( [post_title] => Plastic films & sheets market to reach 70.9 mln tons by 2018 led by demand from food & pharma packag [post_content] => [post_date_gmt] => 2014-03-01 00:00:00 [post_date] => 2014-03-01 00:00:00 [post_modified_gmt] => 2014-03-01 00:00:00 [post_modified] => 2014-03-01 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-1-march-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-1-march-14.html [syndication_item_hash] => 8e4df57c00b23b1489f4f4f45e9674e4 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-1-march-14.html [syndication_item_hash] => 8e4df57c00b23b1489f4f4f45e9674e4 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Plastic films & sheets market to reach 70.9 mln tons by 2018 led by demand from food & pharma packag

Array ( [post_title] => Plastic films & sheets market to reach 70.9 mln tons by 2018 led by demand from food & pharma packag [post_content] => [post_date_gmt] => 2014-03-01 00:00:00 [post_date] => 2014-03-01 00:00:00 [post_modified_gmt] => 2014-03-01 00:00:00 [post_modified] => 2014-03-01 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-1-march-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-1-march-14.html [syndication_item_hash] => 8e4df57c00b23b1489f4f4f45e9674e4 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Led by China and India, BRIC composites market to witness good growth over next five years

Array ( [post_title] => Led by China and India, BRIC composites market to witness good growth over next five years [post_content] => [post_date_gmt] => 2014-02-15 00:00:00 [post_date] => 2014-02-15 00:00:00 [post_modified_gmt] => 2014-02-15 00:00:00 [post_modified] => 2014-02-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-february-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-february-14.html [syndication_item_hash] => ae5dddfaee29ec485d535126cac2fd87 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-february-14.html [syndication_item_hash] => ae5dddfaee29ec485d535126cac2fd87 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Led by China and India, BRIC composites market to witness good growth over next five years

Array ( [post_title] => Led by China and India, BRIC composites market to witness good growth over next five years [post_content] => [post_date_gmt] => 2014-02-15 00:00:00 [post_date] => 2014-02-15 00:00:00 [post_modified_gmt] => 2014-02-15 00:00:00 [post_modified] => 2014-02-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-february-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-february-14.html [syndication_item_hash] => ae5dddfaee29ec485d535126cac2fd87 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Global caps & closures market estimated to reach 2,312 bln by 2018, at CAGR of 4% from 2013 to 2018

Array ( [post_title] => Global caps & closures market estimated to reach 2,312 bln by 2018, at CAGR of 4% from 2013 to 2018 [post_content] => [post_date_gmt] => 2014-01-31 00:00:00 [post_date] => 2014-01-31 00:00:00 [post_modified_gmt] => 2014-01-31 00:00:00 [post_modified] => 2014-01-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-january-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-january-14.html [syndication_item_hash] => 51d268741888cee454eab5765624ce88 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-january-14.html [syndication_item_hash] => 51d268741888cee454eab5765624ce88 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Global caps & closures market estimated to reach 2,312 bln by 2018, at CAGR of 4% from 2013 to 2018

Array ( [post_title] => Global caps & closures market estimated to reach 2,312 bln by 2018, at CAGR of 4% from 2013 to 2018 [post_content] => [post_date_gmt] => 2014-01-31 00:00:00 [post_date] => 2014-01-31 00:00:00 [post_modified_gmt] => 2014-01-31 00:00:00 [post_modified] => 2014-01-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-january-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-january-14.html [syndication_item_hash] => 51d268741888cee454eab5765624ce88 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Flexible packaging market in North America to reach US$25 bln by 2018, to be driven by mass food pro

Array ( [post_title] => Flexible packaging market in North America to reach US$25 bln by 2018, to be driven by mass food pro [post_content] => [post_date_gmt] => 2014-01-15 00:00:00 [post_date] => 2014-01-15 00:00:00 [post_modified_gmt] => 2014-01-15 00:00:00 [post_modified] => 2014-01-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-january-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-january-14.html [syndication_item_hash] => fa63b9fea7188ddc368f8e172cded990 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-january-14.html [syndication_item_hash] => fa63b9fea7188ddc368f8e172cded990 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Flexible packaging market in North America to reach US$25 bln by 2018, to be driven by mass food pro

Array ( [post_title] => Flexible packaging market in North America to reach US$25 bln by 2018, to be driven by mass food pro [post_content] => [post_date_gmt] => 2014-01-15 00:00:00 [post_date] => 2014-01-15 00:00:00 [post_modified_gmt] => 2014-01-15 00:00:00 [post_modified] => 2014-01-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-january-14.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-january-14.html [syndication_item_hash] => fa63b9fea7188ddc368f8e172cded990 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

2013: A challenging year for the Indian petrochemicals industry

Array ( [post_title] => 2013: A challenging year for the Indian petrochemicals industry [post_content] => [post_date_gmt] => 2013-12-31 00:00:00 [post_date] => 2013-12-31 00:00:00 [post_modified_gmt] => 2013-12-31 00:00:00 [post_modified] => 2013-12-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-dec-13.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-dec-13.html [syndication_item_hash] => 8d855cbf582951f155d2e0515a41da43 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-dec-13.html [syndication_item_hash] => 8d855cbf582951f155d2e0515a41da43 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :2013: A challenging year for the Indian petrochemicals industry

Array ( [post_title] => 2013: A challenging year for the Indian petrochemicals industry [post_content] => [post_date_gmt] => 2013-12-31 00:00:00 [post_date] => 2013-12-31 00:00:00 [post_modified_gmt] => 2013-12-31 00:00:00 [post_modified] => 2013-12-31 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-dec-13.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-31-dec-13.html [syndication_item_hash] => 8d855cbf582951f155d2e0515a41da43 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Global Polylactic Acid market to reach US$5.2 bln by 2020 growing at a CAGR of 19.5% from 2013

Array ( [post_title] => Global Polylactic Acid market to reach US$5.2 bln by 2020 growing at a CAGR of 19.5% from 2013 [post_content] => [post_date_gmt] => 2013-12-16 00:00:00 [post_date] => 2013-12-16 00:00:00 [post_modified_gmt] => 2013-12-16 00:00:00 [post_modified] => 2013-12-16 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-december-13.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-december-13.html [syndication_item_hash] => 38d7b613e3afbfe2ce5b02625fe37e12 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-december-13.html [syndication_item_hash] => 38d7b613e3afbfe2ce5b02625fe37e12 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Global Polylactic Acid market to reach US$5.2 bln by 2020 growing at a CAGR of 19.5% from 2013

Array ( [post_title] => Global Polylactic Acid market to reach US$5.2 bln by 2020 growing at a CAGR of 19.5% from 2013 [post_content] => [post_date_gmt] => 2013-12-16 00:00:00 [post_date] => 2013-12-16 00:00:00 [post_modified_gmt] => 2013-12-16 00:00:00 [post_modified] => 2013-12-16 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-december-13.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-december-13.html [syndication_item_hash] => 38d7b613e3afbfe2ce5b02625fe37e12 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Global demand for plastics processing machinery projected to rise 6% pa through 2015

Array ( [post_title] => Global demand for plastics processing machinery projected to rise 6% pa through 2015 [post_content] => [post_date_gmt] => 2013-11-30 00:00:00 [post_date] => 2013-11-30 00:00:00 [post_modified_gmt] => 2013-11-30 00:00:00 [post_modified] => 2013-11-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-30-november-13.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-30-november-13.html [syndication_item_hash] => 6f42ff7f2ca47d7448372c84865e11af ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-30-november-13.html [syndication_item_hash] => 6f42ff7f2ca47d7448372c84865e11af )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Global demand for plastics processing machinery projected to rise 6% pa through 2015

Array ( [post_title] => Global demand for plastics processing machinery projected to rise 6% pa through 2015 [post_content] => [post_date_gmt] => 2013-11-30 00:00:00 [post_date] => 2013-11-30 00:00:00 [post_modified_gmt] => 2013-11-30 00:00:00 [post_modified] => 2013-11-30 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-30-november-13.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-30-november-13.html [syndication_item_hash] => 6f42ff7f2ca47d7448372c84865e11af [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

A US$2.5 bln opportunity for electro-active polymers by 2018 led by conductive plastics

Array ( [post_title] => A US$2.5 bln opportunity for electro-active polymers by 2018 led by conductive plastics [post_content] => [post_date_gmt] => 2013-11-15 00:00:00 [post_date] => 2013-11-15 00:00:00 [post_modified_gmt] => 2013-11-15 00:00:00 [post_modified] => 2013-11-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-november-13.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-november-13.html [syndication_item_hash] => 310cc46fffa3103c845b5495f9b2156d ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-november-13.html [syndication_item_hash] => 310cc46fffa3103c845b5495f9b2156d )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :A US$2.5 bln opportunity for electro-active polymers by 2018 led by conductive plastics

Array ( [post_title] => A US$2.5 bln opportunity for electro-active polymers by 2018 led by conductive plastics [post_content] => [post_date_gmt] => 2013-11-15 00:00:00 [post_date] => 2013-11-15 00:00:00 [post_modified_gmt] => 2013-11-15 00:00:00 [post_modified] => 2013-11-15 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-november-13.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-15-november-13.html [syndication_item_hash] => 310cc46fffa3103c845b5495f9b2156d [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 708

FAF deciding on filters on post to be syndicated:

Engineering plastics continues to grow-estimated to rise to over 29.1 mln tons globally in 2020

Array ( [post_title] => Engineering plastics continues to grow-estimated to rise to over 29.1 mln tons globally in 2020 [post_content] => [post_date_gmt] => 2013-11-01 00:00:00 [post_date] => 2013-11-01 00:00:00 [post_modified_gmt] => 2013-11-01 00:00:00 [post_modified] => 2013-11-01 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-1-november-13.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-1-november-13.html [syndication_item_hash] => 0d067d0d2c008226ce5f23ef70dcac66 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-1-november-13.html [syndication_item_hash] => 0d067d0d2c008226ce5f23ef70dcac66 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Engineering plastics continues to grow-estimated to rise to over 29.1 mln tons globally in 2020

Array ( [post_title] => Engineering plastics continues to grow-estimated to rise to over 29.1 mln tons globally in 2020 [post_content] => [post_date_gmt] => 2013-11-01 00:00:00 [post_date] => 2013-11-01 00:00:00 [post_modified_gmt] => 2013-11-01 00:00:00 [post_modified] => 2013-11-01 00:00:00 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-1-november-13.html [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Newsletter for the Plastics Industry - Plastemart.com [syndication_source_uri] => http://www.plastemart.com/newsletters.asp [syndication_source_id] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed] => http://www.plastemart.com/Rssfeed/Newsletter_for_the_platics_industry.xml [syndication_feed_id] => 67 [syndication_permalink] => http://www.plastemart.com/upload/Newsletter/plastics-newsletter-1-november-13.html [syndication_item_hash] => 0d067d0d2c008226ce5f23ef70dcac66 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 444 ) [post_tag] => Array ( [0] => 5 ) [post_format] => Array ( ) ) [post_excerpt] => )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedlink.class.php on line 302

FAF deciding on filters on post to be syndicated:

Expert Advice on Where to Find Good Freelance Political Article Writing Jobs

Array ( [post_title] => Expert Advice on Where to Find Good Freelance Political Article Writing Jobs [post_content] =>

Politics makes up a majority of the news we come across daily. You will always find something to read from different parts of the world, every single day. And this alone makes the political writing niche one that is filled with numerous opportunities. Therefore, if you are seeking writing and editing jobs in this niche, then you have made the right call.

So, now that you are serious about landing political freelance writing jobs, what are the steps you need to take? Read to know how and where you can find online writing jobs with reasonable rates.

  1. Approach political news blog
  2. There are numerous ways to land political article writing jobs. First, you have to look in the right places. One of the steps you can take is to visit blogs in the niche. Pitch your idea to them and indicate your interest to provide them with regular political articles.

    Even if there’s no opening, you still stand a better chance of landing a freelance writing job. Many of the blogs on the internet are looking for writing help. And if they find that you can add value and even do the job better than them, they might be more than willing to hire you.

  3. Contact online newspapers
  4. As a freelancer or freelance writer, keep in mind that everything is possible. You can create an opening in a company where there’s none. All you need is to be able to display your skills. Give your proposed employers reasons to add you to their team or create an opening for you.

    One of the ways to showcase what you can offer your proposed employers is by providing samples of your work. It could be in the form of well-written guest posts published in other high authority blogs.

    So, if you plan to contact online newspapers, including political news blogs, privately, it would be better to have samples on hand. It would be great if you also wrote the samples yourself. Therefore, ensure you are always given credit after publishing your articles in another blog. In such a case, your name and image or just name will appear at the end of the article.

    What about owning a blog? Have you thought about how it can help to boost your chances of landing a writing gig in your niche of interest? The thing is, having a personal blog will offer you the opportunity to have numerous samples to show to your proposed clients. But then, make sure your blog is professional-looking and contains quality content.

Conclusion

You can get highly paid writing jobs online with ease. All it takes is for you to prove your worth. Let your proposed clients see what you are bringing to the table by offering well-written samples. It will help to convince them to give you a shot. You can also find writing jobs on freelance platforms. The first step is to register and start placing bids. But if you want writing opportunities in politics, use the tips provided in this post.

[post_excerpt] => Politics makes up a majority of the news we come across daily. You will always find something to read from different parts of the world, every single day. And this alone makes the political writing niche one that is filled with numerous opportunities. Therefore, if you are seeking writing and editing jobs in this niche, … [post_date_gmt] => 2020-05-29 15:28:24 [post_date] => 2020-05-29 15:28:24 [post_modified_gmt] => 2020-05-29 15:28:24 [post_modified] => 2020-05-29 15:28:24 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://worldpackagingnews.com/?p=96 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/where-to-find-good-freelance-political-article-writing-jobs.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/where-to-find-good-freelance-political-article-writing-jobs.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/where-to-find-good-freelance-political-article-writing-jobs.html [syndication_item_hash] => b7ed961634bd92ed4ba426a0b9580587 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/where-to-find-good-freelance-political-article-writing-jobs.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/where-to-find-good-freelance-political-article-writing-jobs.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/where-to-find-good-freelance-political-article-writing-jobs.html [syndication_item_hash] => b7ed961634bd92ed4ba426a0b9580587 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Expert Advice on Where to Find Good Freelance Political Article Writing Jobs

Array ( [post_title] => Expert Advice on Where to Find Good Freelance Political Article Writing Jobs [post_content] =>

Politics makes up a majority of the news we come across daily. You will always find something to read from different parts of the world, every single day. And this alone makes the political writing niche one that is filled with numerous opportunities. Therefore, if you are seeking writing and editing jobs in this niche, then you have made the right call.

So, now that you are serious about landing political freelance writing jobs, what are the steps you need to take? Read to know how and where you can find online writing jobs with reasonable rates.

  1. Approach political news blog
  2. There are numerous ways to land political article writing jobs. First, you have to look in the right places. One of the steps you can take is to visit blogs in the niche. Pitch your idea to them and indicate your interest to provide them with regular political articles.

    Even if there’s no opening, you still stand a better chance of landing a freelance writing job. Many of the blogs on the internet are looking for writing help. And if they find that you can add value and even do the job better than them, they might be more than willing to hire you.

  3. Contact online newspapers
  4. As a freelancer or freelance writer, keep in mind that everything is possible. You can create an opening in a company where there’s none. All you need is to be able to display your skills. Give your proposed employers reasons to add you to their team or create an opening for you.

    One of the ways to showcase what you can offer your proposed employers is by providing samples of your work. It could be in the form of well-written guest posts published in other high authority blogs.

    So, if you plan to contact online newspapers, including political news blogs, privately, it would be better to have samples on hand. It would be great if you also wrote the samples yourself. Therefore, ensure you are always given credit after publishing your articles in another blog. In such a case, your name and image or just name will appear at the end of the article.

    What about owning a blog? Have you thought about how it can help to boost your chances of landing a writing gig in your niche of interest? The thing is, having a personal blog will offer you the opportunity to have numerous samples to show to your proposed clients. But then, make sure your blog is professional-looking and contains quality content.

Conclusion

You can get highly paid writing jobs online with ease. All it takes is for you to prove your worth. Let your proposed clients see what you are bringing to the table by offering well-written samples. It will help to convince them to give you a shot. You can also find writing jobs on freelance platforms. The first step is to register and start placing bids. But if you want writing opportunities in politics, use the tips provided in this post.

[post_excerpt] => Politics makes up a majority of the news we come across daily. You will always find something to read from different parts of the world, every single day. And this alone makes the political writing niche one that is filled with numerous opportunities. Therefore, if you are seeking writing and editing jobs in this niche, … [post_date_gmt] => 2020-05-29 15:28:24 [post_date] => 2020-05-29 15:28:24 [post_modified_gmt] => 2020-05-29 15:28:24 [post_modified] => 2020-05-29 15:28:24 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://worldpackagingnews.com/?p=96 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/where-to-find-good-freelance-political-article-writing-jobs.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/where-to-find-good-freelance-political-article-writing-jobs.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/where-to-find-good-freelance-political-article-writing-jobs.html [syndication_item_hash] => b7ed961634bd92ed4ba426a0b9580587 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

3 Great Places to Find Freelance Writing Opportunities

Array ( [post_title] => 3 Great Places to Find Freelance Writing Opportunities [post_content] =>

Where to get jobs is an essential subject for every freelancer. Another important one is the payout. In this 21st century, most of the opportunities are online. Online platforms present ample opportunities for freelance writers. Let’s consider 3 of these platforms.

  1. LinkedIn
  2. To be honest, LinkedIn can be a piece of work. Loads of notifications and connection requests can be mind-blowing. That notwithstanding, LinkedIn is an excellent platform to market your professional skills. It is a unique platform to throw yourself out there.

    Knowing how to maximize the opportunities LinkedIn presents would be of professional benefit. You can get a lot of excellent and well-paying freelance opportunities with this platform. You can also get jobs without sending personal messages to people.

    Now for the “how to go about it.” Potential clients would want to know what you can do. Therefore, update your profile with detailed information about who you are, the services you offer, and the experience you have. You can also place links to the samples of your best works. Ensure all the information you provide accurately and effectively represents you.

    LinkedIn presents you to a world of potential clients. There is no limit to the network of professionals you can connect with both individuals and organizations. LinkedIn search also makes it easy for you to get freelance jobs and groups.

  3. Twitter
  4. Twitter is another excellent platform that can be of benefit to you as a freelance writer if you know how to leverage the opportunities. Twitter, as a social media platform, comprises many people looking for writers and editors. Well written works are also appreciated on the platform.

    You can also share your works on Twitter. You can also strategically build large followership which can also be a way to gain visibility. With your work being retweeted, a client might view your work. Build solid followership, which comprises individuals who like your job, other writers, friends, and professionals in the industry.

    Building your Twitter following and visibility requires consistency. Consistently make creative and relevant write-ups and tweets about what you want to write about. You can also write or tweet about areas you are interested in, e.g., fashion, culture, technology, etc. Engage people with thought-provoking tweets or write-ups.

    In staying relevant as a writer, ensure you stay updated in what’s going on in your fields. Being updated will help you know what people want to read or know about. Networking with other writers and editors might be the lead you need to get an opportunity. They can also help you sharpen your skills and open your mind to explore new possibilities.

  5. Job Interviews
  6. Opportunities can come from anywhere. Some organizations allow you to work for them as a freelance writer. Those jobs interview gives you a shot at what you want. Show them what you’ve got. Who knows it might just pull through for you?

    Finally, get out there and let people know what you do. No one patronizes someone that they cannot vouch for their work.

[post_excerpt] => Where to get jobs is an essential subject for every freelancer. Another important one is the payout. In this 21st century, most of the opportunities are online. Online platforms present ample opportunities for freelance writers. Let’s consider 3 of these platforms. LinkedIn To be honest, LinkedIn can be a piece of work. Loads of notifications … [post_date_gmt] => 2020-05-29 15:25:12 [post_date] => 2020-05-29 15:25:12 [post_modified_gmt] => 2020-05-29 15:25:12 [post_modified] => 2020-05-29 15:25:12 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://worldpackagingnews.com/?p=93 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/3-great-places-to-find-freelance-writing-opportunities.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/3-great-places-to-find-freelance-writing-opportunities.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/3-great-places-to-find-freelance-writing-opportunities.html [syndication_item_hash] => 64fde2529dc552d125fc9ecc4589b729 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/3-great-places-to-find-freelance-writing-opportunities.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/3-great-places-to-find-freelance-writing-opportunities.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/3-great-places-to-find-freelance-writing-opportunities.html [syndication_item_hash] => 64fde2529dc552d125fc9ecc4589b729 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :3 Great Places to Find Freelance Writing Opportunities

Array ( [post_title] => 3 Great Places to Find Freelance Writing Opportunities [post_content] =>

Where to get jobs is an essential subject for every freelancer. Another important one is the payout. In this 21st century, most of the opportunities are online. Online platforms present ample opportunities for freelance writers. Let’s consider 3 of these platforms.

  1. LinkedIn
  2. To be honest, LinkedIn can be a piece of work. Loads of notifications and connection requests can be mind-blowing. That notwithstanding, LinkedIn is an excellent platform to market your professional skills. It is a unique platform to throw yourself out there.

    Knowing how to maximize the opportunities LinkedIn presents would be of professional benefit. You can get a lot of excellent and well-paying freelance opportunities with this platform. You can also get jobs without sending personal messages to people.

    Now for the “how to go about it.” Potential clients would want to know what you can do. Therefore, update your profile with detailed information about who you are, the services you offer, and the experience you have. You can also place links to the samples of your best works. Ensure all the information you provide accurately and effectively represents you.

    LinkedIn presents you to a world of potential clients. There is no limit to the network of professionals you can connect with both individuals and organizations. LinkedIn search also makes it easy for you to get freelance jobs and groups.

  3. Twitter
  4. Twitter is another excellent platform that can be of benefit to you as a freelance writer if you know how to leverage the opportunities. Twitter, as a social media platform, comprises many people looking for writers and editors. Well written works are also appreciated on the platform.

    You can also share your works on Twitter. You can also strategically build large followership which can also be a way to gain visibility. With your work being retweeted, a client might view your work. Build solid followership, which comprises individuals who like your job, other writers, friends, and professionals in the industry.

    Building your Twitter following and visibility requires consistency. Consistently make creative and relevant write-ups and tweets about what you want to write about. You can also write or tweet about areas you are interested in, e.g., fashion, culture, technology, etc. Engage people with thought-provoking tweets or write-ups.

    In staying relevant as a writer, ensure you stay updated in what’s going on in your fields. Being updated will help you know what people want to read or know about. Networking with other writers and editors might be the lead you need to get an opportunity. They can also help you sharpen your skills and open your mind to explore new possibilities.

  5. Job Interviews
  6. Opportunities can come from anywhere. Some organizations allow you to work for them as a freelance writer. Those jobs interview gives you a shot at what you want. Show them what you’ve got. Who knows it might just pull through for you?

    Finally, get out there and let people know what you do. No one patronizes someone that they cannot vouch for their work.

[post_excerpt] => Where to get jobs is an essential subject for every freelancer. Another important one is the payout. In this 21st century, most of the opportunities are online. Online platforms present ample opportunities for freelance writers. Let’s consider 3 of these platforms. LinkedIn To be honest, LinkedIn can be a piece of work. Loads of notifications … [post_date_gmt] => 2020-05-29 15:25:12 [post_date] => 2020-05-29 15:25:12 [post_modified_gmt] => 2020-05-29 15:25:12 [post_modified] => 2020-05-29 15:25:12 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://worldpackagingnews.com/?p=93 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/3-great-places-to-find-freelance-writing-opportunities.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/3-great-places-to-find-freelance-writing-opportunities.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/3-great-places-to-find-freelance-writing-opportunities.html [syndication_item_hash] => 64fde2529dc552d125fc9ecc4589b729 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

How Do You Get Freelance Story Writing Jobs From Home?

Array ( [post_title] => How Do You Get Freelance Story Writing Jobs From Home? [post_content] =>

Writing has changed drastically in these modern days. In the past, finding writing jobs was much harder. Then the internet was not in existence or as advanced as it is today. So, after spending hours to write, the writer has to spend even more hours and energy, seeking a buyer for his or her work.

Now you can sit at the comfort of your home and secure freelance writing jobs without any hard work or stress. However, niche varies. There are also numerous online writing and editing jobs for a story writer. But one needs to look in the right places to find them.

So, if you’re interested in figuring out how a story writer can find jobs from home, then you need to read this post from start to finish.

1. Registering on freelance platforms

The emergence of freelance platforms has increased the confidence of freelancers across the globe. That’s because of the drastic and result-driven marketing approach these platforms are using. The opportunities for writers and those in other niches are enormous. Plus, there are numerous freelance sites where one can secure jobs without breaking a sweat.

In spite of the increased number of freelance platforms, there are steps one needs to take to secure jobs. Since you are a storyteller, you need to have an excellent review to boost the confidence of clients. Another way you can obtain a job is to place bids for offers that you find suitable for your skills.

So when you visit any of these freelance platforms and signup, ensure your profile is a hundred percent complete. You can also increase your chances of landing a writing job by creating and offering quality samples. Nevertheless, since your account is still new and has no reviews, you can take it upon yourself to create story samples.

The majority of the freelance platforms today have options where you can add samples for clients to check and rate the quality of your work. That enables them to make a quick decision on whether to hire you for their project or not.

Here are the top freelance platforms you can visit. You will find online writing jobs and opportunities in other niches here.

This list goes on and on! There are long lists of sites out there you can join, and the exciting thing is that you do not have to pay a dime to participate.

2. Display your skills on social media

The power of social media far outgrows social interaction. You can achieve just about anything on these platforms if you are serious about it. How can you get story writing jobs on social media? Start by sharing thought-provoking stories.

You might be surprised to find your audience reaching out to you for a project in your niche sooner than later. Your story might also get more engagements than you think. Those who find them interesting may like to share on their social media accounts and even on their blogs.

Conclusion

If you can write great stories, be it fiction or non-fiction, then you should be making money with your skills. Keep in mind that there are people who are seeking your kind to hire. All you need to do is look in the right places. In this post, you will discover a couple of places you can search for story writing gigs, including ideas you can deploy to get story writing jobs.

[post_excerpt] => Writing has changed drastically in these modern days. In the past, finding writing jobs was much harder. Then the internet was not in existence or as advanced as it is today. So, after spending hours to write, the writer has to spend even more hours and energy, seeking a buyer for his or her work. … [post_date_gmt] => 2020-05-29 15:14:19 [post_date] => 2020-05-29 15:14:19 [post_modified_gmt] => 2020-05-29 15:14:19 [post_modified] => 2020-05-29 15:14:19 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://worldpackagingnews.com/?p=89 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/how-do-you-get-freelance-writing-jobs-from-home.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/how-do-you-get-freelance-writing-jobs-from-home.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/how-do-you-get-freelance-writing-jobs-from-home.html [syndication_item_hash] => 23e4a5e22a57520bd4af2b7f2bf6223f ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/how-do-you-get-freelance-writing-jobs-from-home.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/how-do-you-get-freelance-writing-jobs-from-home.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/how-do-you-get-freelance-writing-jobs-from-home.html [syndication_item_hash] => 23e4a5e22a57520bd4af2b7f2bf6223f )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :How Do You Get Freelance Story Writing Jobs From Home?

Array ( [post_title] => How Do You Get Freelance Story Writing Jobs From Home? [post_content] =>

Writing has changed drastically in these modern days. In the past, finding writing jobs was much harder. Then the internet was not in existence or as advanced as it is today. So, after spending hours to write, the writer has to spend even more hours and energy, seeking a buyer for his or her work.

Now you can sit at the comfort of your home and secure freelance writing jobs without any hard work or stress. However, niche varies. There are also numerous online writing and editing jobs for a story writer. But one needs to look in the right places to find them.

So, if you’re interested in figuring out how a story writer can find jobs from home, then you need to read this post from start to finish.

1. Registering on freelance platforms

The emergence of freelance platforms has increased the confidence of freelancers across the globe. That’s because of the drastic and result-driven marketing approach these platforms are using. The opportunities for writers and those in other niches are enormous. Plus, there are numerous freelance sites where one can secure jobs without breaking a sweat.

In spite of the increased number of freelance platforms, there are steps one needs to take to secure jobs. Since you are a storyteller, you need to have an excellent review to boost the confidence of clients. Another way you can obtain a job is to place bids for offers that you find suitable for your skills.

So when you visit any of these freelance platforms and signup, ensure your profile is a hundred percent complete. You can also increase your chances of landing a writing job by creating and offering quality samples. Nevertheless, since your account is still new and has no reviews, you can take it upon yourself to create story samples.

The majority of the freelance platforms today have options where you can add samples for clients to check and rate the quality of your work. That enables them to make a quick decision on whether to hire you for their project or not.

Here are the top freelance platforms you can visit. You will find online writing jobs and opportunities in other niches here.

This list goes on and on! There are long lists of sites out there you can join, and the exciting thing is that you do not have to pay a dime to participate.

2. Display your skills on social media

The power of social media far outgrows social interaction. You can achieve just about anything on these platforms if you are serious about it. How can you get story writing jobs on social media? Start by sharing thought-provoking stories.

You might be surprised to find your audience reaching out to you for a project in your niche sooner than later. Your story might also get more engagements than you think. Those who find them interesting may like to share on their social media accounts and even on their blogs.

Conclusion

If you can write great stories, be it fiction or non-fiction, then you should be making money with your skills. Keep in mind that there are people who are seeking your kind to hire. All you need to do is look in the right places. In this post, you will discover a couple of places you can search for story writing gigs, including ideas you can deploy to get story writing jobs.

[post_excerpt] => Writing has changed drastically in these modern days. In the past, finding writing jobs was much harder. Then the internet was not in existence or as advanced as it is today. So, after spending hours to write, the writer has to spend even more hours and energy, seeking a buyer for his or her work. … [post_date_gmt] => 2020-05-29 15:14:19 [post_date] => 2020-05-29 15:14:19 [post_modified_gmt] => 2020-05-29 15:14:19 [post_modified] => 2020-05-29 15:14:19 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://worldpackagingnews.com/?p=89 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/how-do-you-get-freelance-writing-jobs-from-home.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/how-do-you-get-freelance-writing-jobs-from-home.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/how-do-you-get-freelance-writing-jobs-from-home.html [syndication_item_hash] => 23e4a5e22a57520bd4af2b7f2bf6223f [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 10054 ) [post_format] => Array ( ) ) )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 1330

FAF deciding on filters on post to be syndicated:

The Best Way To Succeed And Specializing In Writing Jobs Online

Array ( [post_title] => The Best Way To Succeed And Specializing In Writing Jobs Online [post_content] =>

After graduating college I spent the greater part of a year traveling around the world and found that I could make money as a freelance writer. There were hundreds of internet writing jobs at my disposal and I really liked the freedom I had in setting my own schedule and choosing my projects. I did everything from simple proofreading to writing custom articles and assignments. Freelance writing jobs no experience can be a great way of earning extra income as you get your career started or simply want to take some time off (like I did). Here’s the best way to succeed in this popular field:

Search for a Wide Range of Writing Jobs
Start searching for a wide range of opportunities including, proofreader, technical writing jobs, and custom writer jobs. Your goal should be to apply to several places at once and possibly work with two or three agencies just so that you have a greater variety of projects you can finish quickly or spend a few days on depending on your schedule. This also lets you get a better feel for what the market is like. The more information you can gather the more prepared you will be when you apply.

Communicate with Other Freelancers
We all know the benefits of professional networking and this holds true in the freelancing industry. When I was searching for jobs my communication with other freelancers allowed me to learn about opportunities that they had passed on but felt I should apply to. Particularly, I found an editing job that helped me start a portfolio and positioned me to hear about higher paying gigs that fit perfectly into my schedule. I have other freelancers and my relationships with them to thank for this early success.

Focus on Developing Your Writing Skills
Writing takes a lot of hard work and you must always work towards developing your writing skills whether or not you are planning on doing it professionally for very long. Identify areas you have struggled with in the past and work on everything from sentence structure to vocabulary use. You should notice a significant improvement over the course of a few months and will likely build a base of dedicated clients who would prefer working with you over other freelancers.

Update Your Portfolio Every Few Weeks
Lastly, always keep your portfolio updated with your best current work. A lot of people start portfolio but don’t pay too much attention to them after a while. You should aim to make appropriate changes to it every few weeks. Take advantage of showing off your best writing and you will immediately see the positive impact it has in the kinds of job offers you receive.

You should now be able to find and succeed at academic writing jobs through a professional web service. Identify the main areas and topics you want to write about and stay proactive in your involvement with the agency. This should keep you aware of new projects as they appear and you’ll have more choice when it comes to selecting those projects which pay the most and you can do without any trouble.

[post_excerpt] => After graduating college I spent the greater part of a year traveling around the world and found that I could make money as a freelance writer. There were hundreds of internet writing jobs at my disposal and I really liked the freedom I had in setting my own schedule and choosing my projects. I did … [post_date_gmt] => 2019-01-10 10:02:15 [post_date] => 2019-01-10 10:02:15 [post_modified_gmt] => 2019-01-10 10:02:15 [post_modified] => 2019-01-10 10:02:15 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://worldpackagingnews.com/?p=77 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/the-best-way-to-succeed-and-specializing-in-writing-jobs-online.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/the-best-way-to-succeed-and-specializing-in-writing-jobs-online.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/the-best-way-to-succeed-and-specializing-in-writing-jobs-online.html [syndication_item_hash] => Array ( [0] => e68458f21bb6239c6e043d8c395aaf07 [1] => 6984d9b95018be7f0f803b4326be383e ) ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 14003 [1] => 14035 ) [post_format] => Array ( ) ) [post_name] => the-best-way-to-succeed-and-specializing-in-writing-jobs-online )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/the-best-way-to-succeed-and-specializing-in-writing-jobs-online.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/the-best-way-to-succeed-and-specializing-in-writing-jobs-online.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/the-best-way-to-succeed-and-specializing-in-writing-jobs-online.html [syndication_item_hash] => Array ( [0] => e68458f21bb6239c6e043d8c395aaf07 [1] => 6984d9b95018be7f0f803b4326be383e ) )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :The Best Way To Succeed And Specializing In Writing Jobs Online

Array ( [post_title] => The Best Way To Succeed And Specializing In Writing Jobs Online [post_content] =>

After graduating college I spent the greater part of a year traveling around the world and found that I could make money as a freelance writer. There were hundreds of internet writing jobs at my disposal and I really liked the freedom I had in setting my own schedule and choosing my projects. I did everything from simple proofreading to writing custom articles and assignments. Freelance writing jobs no experience can be a great way of earning extra income as you get your career started or simply want to take some time off (like I did). Here’s the best way to succeed in this popular field:

Search for a Wide Range of Writing Jobs
Start searching for a wide range of opportunities including, proofreader, technical writing jobs, and custom writer jobs. Your goal should be to apply to several places at once and possibly work with two or three agencies just so that you have a greater variety of projects you can finish quickly or spend a few days on depending on your schedule. This also lets you get a better feel for what the market is like. The more information you can gather the more prepared you will be when you apply.

Communicate with Other Freelancers
We all know the benefits of professional networking and this holds true in the freelancing industry. When I was searching for jobs my communication with other freelancers allowed me to learn about opportunities that they had passed on but felt I should apply to. Particularly, I found an editing job that helped me start a portfolio and positioned me to hear about higher paying gigs that fit perfectly into my schedule. I have other freelancers and my relationships with them to thank for this early success.

Focus on Developing Your Writing Skills
Writing takes a lot of hard work and you must always work towards developing your writing skills whether or not you are planning on doing it professionally for very long. Identify areas you have struggled with in the past and work on everything from sentence structure to vocabulary use. You should notice a significant improvement over the course of a few months and will likely build a base of dedicated clients who would prefer working with you over other freelancers.

Update Your Portfolio Every Few Weeks
Lastly, always keep your portfolio updated with your best current work. A lot of people start portfolio but don’t pay too much attention to them after a while. You should aim to make appropriate changes to it every few weeks. Take advantage of showing off your best writing and you will immediately see the positive impact it has in the kinds of job offers you receive.

You should now be able to find and succeed at academic writing jobs through a professional web service. Identify the main areas and topics you want to write about and stay proactive in your involvement with the agency. This should keep you aware of new projects as they appear and you’ll have more choice when it comes to selecting those projects which pay the most and you can do without any trouble.

[post_excerpt] => After graduating college I spent the greater part of a year traveling around the world and found that I could make money as a freelance writer. There were hundreds of internet writing jobs at my disposal and I really liked the freedom I had in setting my own schedule and choosing my projects. I did … [post_date_gmt] => 2019-01-10 10:02:15 [post_date] => 2019-01-10 10:02:15 [post_modified_gmt] => 2019-01-10 10:02:15 [post_modified] => 2019-01-10 10:02:15 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://worldpackagingnews.com/?p=77 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/the-best-way-to-succeed-and-specializing-in-writing-jobs-online.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/the-best-way-to-succeed-and-specializing-in-writing-jobs-online.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/the-best-way-to-succeed-and-specializing-in-writing-jobs-online.html [syndication_item_hash] => Array ( [0] => e68458f21bb6239c6e043d8c395aaf07 [1] => 6984d9b95018be7f0f803b4326be383e ) [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 14003 [1] => 14035 ) [post_format] => Array ( ) ) [post_name] => the-best-way-to-succeed-and-specializing-in-writing-jobs-online )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedpost.class.php on line 1330

FAF deciding on filters on post to be syndicated:

Which Website Has The Best Online Writing Jobs For Beginners

Array ( [post_title] => Which Website Has The Best Online Writing Jobs For Beginners [post_content] =>

Writing websites are the easiest and most reliable source of freelance jobs for writers. This has led to a proliferation of such sites. Some of these sites are not genuine and are out to con writers. Others offer very low rates that it does not translate into value for money. You cannot even make a career out of some. How do you know which website will help you build a successful freelancing career and which one to avoid? Here are excellent tips.

Check Reviews
Reviews are real life experiences of freelancers working in the industry. They give feedback on websites offering the best online proofreading jobs, excellent rates, constant work and reasonable payment schedules, among other important factors for freelancers. These websites are also reviewed on news media and such other platforms. Choose a company or website that has received more positive ratings. This will increase your chances of having a successful career working online. The reviews should be on independent platforms because some companies can manipulate the reviews to portray their websites and services in positive light.

You Will Have To Take Tests
Clients and writing websites subject their writers to tests to determine their capacity to deliver. You must be willing to begin your freelance writing career with a test. This is a common occurrence especially when you are looking for freelance writing jobs from home for beginners. It means that you do not have samples or the experience that would give confidence to a client. The test also helps the website or client to grade you and in the process determine where you fit best. It will also give you an idea whether you can fit into the industry or not. You can therefore have legitimate expectations instead of wasting your time.

Choose The Type of Job You Want
There are numerous jobs you can do online as a freelancer. They include writing, graphics design, editing and proofreading, among others. You have to pick the niche that best suits your training, skills, passion and resources. By choosing a niche, you can specialize and therefore become a pro. Clients want professionals who understand particular areas and not persons who will be using trial and error. Choose a niche and advance your skills. You will reap big from the process. Academic paper writing is becoming more popular nowadays. Companies like ThesisRush are looking for writers and editors, so don’t hesitate to apply.

The Sites Pay Differently
Choose a website that is paying you reasonably well. Different websites will pay different amounts for the same job. Search widely to identify where you are likely to get value for money and where your efforts will be wasted.

Beware of Fraud
There is a rise in number of sites conning writers. They purport to offer jobs only to disappear with your work once it is submitted. Do not be enticed by the prospects of getting well paying editor jobs at home only to end up losing your time, effort and money on work that is not delivering results. Demand milestones when taking work if you are not sure of the credibility of the website you have registered.

It is impossible to exhaust websites offering online content writing jobs. Perform due diligence, check reviews and get referrals. It will take some time to find a website or several of them that can offer quality and regular work.

[post_excerpt] => Writing websites are the easiest and most reliable source of freelance jobs for writers. This has led to a proliferation of such sites. Some of these sites are not genuine and are out to con writers. Others offer very low rates that it does not translate into value for money. You cannot even make a … [post_date_gmt] => 2018-12-12 10:04:31 [post_date] => 2018-12-12 10:04:31 [post_modified_gmt] => 2018-12-12 10:04:31 [post_modified] => 2018-12-12 10:04:31 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://worldpackagingnews.com/?p=73 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/which-website-has-the-best-online-writing-jobs-for-beginners.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/which-website-has-the-best-online-writing-jobs-for-beginners.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/which-website-has-the-best-online-writing-jobs-for-beginners.html [syndication_item_hash] => Array ( [0] => e23777cb3f10cf4515601911ac3456c3 [1] => 6f6204753ec657442ecdb761563de68f ) ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 14004 [1] => 14035 ) [post_format] => Array ( ) ) [post_name] => which-website-has-the-best-online-writing-jobs-for-beginners )

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/which-website-has-the-best-online-writing-jobs-for-beginners.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/which-website-has-the-best-online-writing-jobs-for-beginners.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/which-website-has-the-best-online-writing-jobs-for-beginners.html [syndication_item_hash] => Array ( [0] => e23777cb3f10cf4515601911ac3456c3 [1] => 6f6204753ec657442ecdb761563de68f ) )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Which Website Has The Best Online Writing Jobs For Beginners

Array ( [post_title] => Which Website Has The Best Online Writing Jobs For Beginners [post_content] =>

Writing websites are the easiest and most reliable source of freelance jobs for writers. This has led to a proliferation of such sites. Some of these sites are not genuine and are out to con writers. Others offer very low rates that it does not translate into value for money. You cannot even make a career out of some. How do you know which website will help you build a successful freelancing career and which one to avoid? Here are excellent tips.

Check Reviews
Reviews are real life experiences of freelancers working in the industry. They give feedback on websites offering the best online proofreading jobs, excellent rates, constant work and reasonable payment schedules, among other important factors for freelancers. These websites are also reviewed on news media and such other platforms. Choose a company or website that has received more positive ratings. This will increase your chances of having a successful career working online. The reviews should be on independent platforms because some companies can manipulate the reviews to portray their websites and services in positive light.

You Will Have To Take Tests
Clients and writing websites subject their writers to tests to determine their capacity to deliver. You must be willing to begin your freelance writing career with a test. This is a common occurrence especially when you are looking for freelance writing jobs from home for beginners. It means that you do not have samples or the experience that would give confidence to a client. The test also helps the website or client to grade you and in the process determine where you fit best. It will also give you an idea whether you can fit into the industry or not. You can therefore have legitimate expectations instead of wasting your time.

Choose The Type of Job You Want
There are numerous jobs you can do online as a freelancer. They include writing, graphics design, editing and proofreading, among others. You have to pick the niche that best suits your training, skills, passion and resources. By choosing a niche, you can specialize and therefore become a pro. Clients want professionals who understand particular areas and not persons who will be using trial and error. Choose a niche and advance your skills. You will reap big from the process. Academic paper writing is becoming more popular nowadays. Companies like ThesisRush are looking for writers and editors, so don’t hesitate to apply.

The Sites Pay Differently
Choose a website that is paying you reasonably well. Different websites will pay different amounts for the same job. Search widely to identify where you are likely to get value for money and where your efforts will be wasted.

Beware of Fraud
There is a rise in number of sites conning writers. They purport to offer jobs only to disappear with your work once it is submitted. Do not be enticed by the prospects of getting well paying editor jobs at home only to end up losing your time, effort and money on work that is not delivering results. Demand milestones when taking work if you are not sure of the credibility of the website you have registered.

It is impossible to exhaust websites offering online content writing jobs. Perform due diligence, check reviews and get referrals. It will take some time to find a website or several of them that can offer quality and regular work.

[post_excerpt] => Writing websites are the easiest and most reliable source of freelance jobs for writers. This has led to a proliferation of such sites. Some of these sites are not genuine and are out to con writers. Others offer very low rates that it does not translate into value for money. You cannot even make a … [post_date_gmt] => 2018-12-12 10:04:31 [post_date] => 2018-12-12 10:04:31 [post_modified_gmt] => 2018-12-12 10:04:31 [post_modified] => 2018-12-12 10:04:31 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://worldpackagingnews.com/?p=73 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Worldpack Aging News [syndication_source_uri] => http://worldpackagingnews.com [syndication_source_id] => http://www.worldpackagingnews.com/feed/ [rss:comments] => http://worldpackagingnews.com/which-website-has-the-best-online-writing-jobs-for-beginners.html#respond [wfw:commentRSS] => http://worldpackagingnews.com/which-website-has-the-best-online-writing-jobs-for-beginners.html/feed [syndication_feed] => http://www.worldpackagingnews.com/feed/ [syndication_feed_id] => 47 [syndication_permalink] => http://worldpackagingnews.com/which-website-has-the-best-online-writing-jobs-for-beginners.html [syndication_item_hash] => Array ( [0] => e23777cb3f10cf4515601911ac3456c3 [1] => 6f6204753ec657442ecdb761563de68f ) [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( ) [post_tag] => Array ( [0] => 14004 [1] => 14035 ) [post_format] => Array ( ) ) [post_name] => which-website-has-the-best-online-writing-jobs-for-beginners )


Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedlink.class.php on line 302

Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedlink.class.php on line 302

1

Attach Id ( 194367 ) not integer for post_thumbnail 194085

1

Attach Id ( 196176 ) not integer for post_thumbnail 195688

1

Attach Id ( 197036 ) not integer for post_thumbnail 197000

1

Attach Id ( 199012 ) not integer for post_thumbnail 198936

1

Attach Id ( 228522 ) not integer for post_thumbnail 221129

1

Attach Id ( 234309 ) not integer for post_thumbnail 234297

1

Attach Id ( 253580 ) not integer for post_thumbnail 249228

1

Attach Id ( 276919 ) not integer for post_thumbnail 276406

1

Attach Id ( 276921 ) not integer for post_thumbnail 276421

1

Attach Id ( 276923 ) not integer for post_thumbnail 276424

1

Attach Id ( 276951 ) not integer for post_thumbnail 275971

1

Attach Id ( 276968 ) not integer for post_thumbnail 275977

1

Attach Id ( 276994 ) not integer for post_thumbnail 276427

1

Attach Id ( 276996 ) not integer for post_thumbnail 276430

1

Attach Id ( 277001 ) not integer for post_thumbnail 276465

1

Attach Id ( 277003 ) not integer for post_thumbnail 276468

1

Attach Id ( 277005 ) not integer for post_thumbnail 276306

1

Attach Id ( 277007 ) not integer for post_thumbnail 276471

1

Attach Id ( 277009 ) not integer for post_thumbnail 276474

1

Attach Id ( 277011 ) not integer for post_thumbnail 276477

1

Attach Id ( 277015 ) not integer for post_thumbnail 276136

1

Attach Id ( 379383 ) not integer for post_thumbnail 378342

1

Attach Id ( 379385 ) not integer for post_thumbnail 378345

1

Attach Id ( 379387 ) not integer for post_thumbnail 378348

1

Attach Id ( 386994 ) not integer for post_thumbnail 325003

1

Attach Id ( 389810 ) not integer for post_thumbnail 389701

1

Attach Id ( 407721 ) not integer for post_thumbnail 361336

1

Attach Id ( 408068 ) not integer for post_thumbnail 404376

1

Attach Id ( 408149 ) not integer for post_thumbnail 293296

1

Attach Id ( 408389 ) not integer for post_thumbnail 300814

1

Attach Id ( 408460 ) not integer for post_thumbnail 377163

1

Attach Id ( 409232 ) not integer for post_thumbnail 308600

1

Attach Id ( 412819 ) not integer for post_thumbnail 336808

1

Attach Id ( 413176 ) not integer for post_thumbnail 337034

1

Attach Id ( 419280 ) not integer for post_thumbnail 418246

7 Questions to gain control of your brand on the digital shelf | Slitter, converting, labelling and hot melt news