FAF deciding on filters on post to be syndicated:

AEP Industries Inc. Announces Results of Special Meeting

Array ( [post_title] => AEP Industries Inc. Announces Results of Special Meeting [post_content] => [post_date_gmt] => 2017-01-18 20:51:51 [post_date] => 2017-01-18 20:51:51 [post_modified_gmt] => 2017-01-18 20:51:51 [post_modified] => 2017-01-18 20:51:51 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=784 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2017/01/aep-industries-inc-announces-results-of-special-meeting/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2017/01/aep-industries-inc-announces-results-of-special-meeting/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/lc4ZQiZfO98/ [syndication_item_hash] => 6a6869f283fbe56fe0d35411558b5c3a ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2017/01/aep-industries-inc-announces-results-of-special-meeting/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2017/01/aep-industries-inc-announces-results-of-special-meeting/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/lc4ZQiZfO98/ [syndication_item_hash] => 6a6869f283fbe56fe0d35411558b5c3a )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :AEP Industries Inc. Announces Results of Special Meeting

Array ( [post_title] => AEP Industries Inc. Announces Results of Special Meeting [post_content] => [post_date_gmt] => 2017-01-18 20:51:51 [post_date] => 2017-01-18 20:51:51 [post_modified_gmt] => 2017-01-18 20:51:51 [post_modified] => 2017-01-18 20:51:51 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=784 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2017/01/aep-industries-inc-announces-results-of-special-meeting/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2017/01/aep-industries-inc-announces-results-of-special-meeting/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/lc4ZQiZfO98/ [syndication_item_hash] => 6a6869f283fbe56fe0d35411558b5c3a [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) [post_excerpt] => )

FAF deciding on filters on post to be syndicated:

AEP INDUSTRIES INC. REPORTS FISCAL 2016 RESULTS

Array ( [post_title] => AEP INDUSTRIES INC. REPORTS FISCAL 2016 RESULTS [post_content] => [post_date_gmt] => 2017-01-16 18:03:46 [post_date] => 2017-01-16 18:03:46 [post_modified_gmt] => 2017-01-16 18:03:46 [post_modified] => 2017-01-16 18:03:46 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=777 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2017/01/aep-industries-inc-reports-fiscal-2016-results/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2017/01/aep-industries-inc-reports-fiscal-2016-results/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/NxzlOF0vnro/ [syndication_item_hash] => bc3bfcbf10d8b0823e603d480367c57c ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2017/01/aep-industries-inc-reports-fiscal-2016-results/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2017/01/aep-industries-inc-reports-fiscal-2016-results/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/NxzlOF0vnro/ [syndication_item_hash] => bc3bfcbf10d8b0823e603d480367c57c )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :AEP INDUSTRIES INC. REPORTS FISCAL 2016 RESULTS

Array ( [post_title] => AEP INDUSTRIES INC. REPORTS FISCAL 2016 RESULTS [post_content] => [post_date_gmt] => 2017-01-16 18:03:46 [post_date] => 2017-01-16 18:03:46 [post_modified_gmt] => 2017-01-16 18:03:46 [post_modified] => 2017-01-16 18:03:46 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=777 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2017/01/aep-industries-inc-reports-fiscal-2016-results/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2017/01/aep-industries-inc-reports-fiscal-2016-results/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/NxzlOF0vnro/ [syndication_item_hash] => bc3bfcbf10d8b0823e603d480367c57c [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) [post_excerpt] => )

FAF deciding on filters on post to be syndicated:

AEP Industries Inc. and Berry Plastics Group, Inc. Announce January 18, 2017 Election Deadline

Array ( [post_title] => AEP Industries Inc. and Berry Plastics Group, Inc. Announce January 18, 2017 Election Deadline [post_content] => [post_date_gmt] => 2017-01-10 16:28:19 [post_date] => 2017-01-10 16:28:19 [post_modified_gmt] => 2017-01-10 16:28:19 [post_modified] => 2017-01-10 16:28:19 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=774 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2017/01/aep-industries-inc-and-berry-plastics-group-inc-announce-january-18-2017-election-deadline/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2017/01/aep-industries-inc-and-berry-plastics-group-inc-announce-january-18-2017-election-deadline/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/5rel900yTNs/ [syndication_item_hash] => c8000fbfca02e175ff95d49a3926f1f6 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2017/01/aep-industries-inc-and-berry-plastics-group-inc-announce-january-18-2017-election-deadline/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2017/01/aep-industries-inc-and-berry-plastics-group-inc-announce-january-18-2017-election-deadline/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/5rel900yTNs/ [syndication_item_hash] => c8000fbfca02e175ff95d49a3926f1f6 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :AEP Industries Inc. and Berry Plastics Group, Inc. Announce January 18, 2017 Election Deadline

Array ( [post_title] => AEP Industries Inc. and Berry Plastics Group, Inc. Announce January 18, 2017 Election Deadline [post_content] => [post_date_gmt] => 2017-01-10 16:28:19 [post_date] => 2017-01-10 16:28:19 [post_modified_gmt] => 2017-01-10 16:28:19 [post_modified] => 2017-01-10 16:28:19 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=774 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2017/01/aep-industries-inc-and-berry-plastics-group-inc-announce-january-18-2017-election-deadline/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2017/01/aep-industries-inc-and-berry-plastics-group-inc-announce-january-18-2017-election-deadline/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/5rel900yTNs/ [syndication_item_hash] => c8000fbfca02e175ff95d49a3926f1f6 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) [post_excerpt] => )

FAF deciding on filters on post to be syndicated:

AEP INDUSTRIES INC. ANNOUNCES FIRST QUARTER FISCAL 2017 DIVIDEND

Array ( [post_title] => AEP INDUSTRIES INC. ANNOUNCES FIRST QUARTER FISCAL 2017 DIVIDEND [post_content] => [post_date_gmt] => 2016-10-19 13:14:15 [post_date] => 2016-10-19 13:14:15 [post_modified_gmt] => 2016-10-19 13:14:15 [post_modified] => 2016-10-19 13:14:15 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=770 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/10/aep-industries-inc-announces-first-quarter-fiscal-2017-dividend/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/10/aep-industries-inc-announces-first-quarter-fiscal-2017-dividend/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/yNdAFDQbVDk/ [syndication_item_hash] => 50563b0d6f5e782575d954a02754e8e2 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/10/aep-industries-inc-announces-first-quarter-fiscal-2017-dividend/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/10/aep-industries-inc-announces-first-quarter-fiscal-2017-dividend/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/yNdAFDQbVDk/ [syndication_item_hash] => 50563b0d6f5e782575d954a02754e8e2 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :AEP INDUSTRIES INC. ANNOUNCES FIRST QUARTER FISCAL 2017 DIVIDEND

Array ( [post_title] => AEP INDUSTRIES INC. ANNOUNCES FIRST QUARTER FISCAL 2017 DIVIDEND [post_content] => [post_date_gmt] => 2016-10-19 13:14:15 [post_date] => 2016-10-19 13:14:15 [post_modified_gmt] => 2016-10-19 13:14:15 [post_modified] => 2016-10-19 13:14:15 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=770 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/10/aep-industries-inc-announces-first-quarter-fiscal-2017-dividend/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/10/aep-industries-inc-announces-first-quarter-fiscal-2017-dividend/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/yNdAFDQbVDk/ [syndication_item_hash] => 50563b0d6f5e782575d954a02754e8e2 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) [post_excerpt] => )

FAF deciding on filters on post to be syndicated:

AEP INDUSTRIES INC. REPORTS FISCAL 2016 THIRD QUARTER AND YEAR-TO- DATE RESULTS

Array ( [post_title] => AEP INDUSTRIES INC. REPORTS FISCAL 2016 THIRD QUARTER AND YEAR-TO- DATE RESULTS [post_content] => [post_date_gmt] => 2016-09-09 13:27:46 [post_date] => 2016-09-09 13:27:46 [post_modified_gmt] => 2016-09-09 13:27:46 [post_modified] => 2016-09-09 13:27:46 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=761 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/09/aep-industries-inc-reports-fiscal-2016-third-quarter-and-year-to-date-results/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/09/aep-industries-inc-reports-fiscal-2016-third-quarter-and-year-to-date-results/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/tgZbzYuTUaY/ [syndication_item_hash] => cb73fdf27384197084ab02ec6cee9add ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/09/aep-industries-inc-reports-fiscal-2016-third-quarter-and-year-to-date-results/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/09/aep-industries-inc-reports-fiscal-2016-third-quarter-and-year-to-date-results/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/tgZbzYuTUaY/ [syndication_item_hash] => cb73fdf27384197084ab02ec6cee9add )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :AEP INDUSTRIES INC. REPORTS FISCAL 2016 THIRD QUARTER AND YEAR-TO- DATE RESULTS

Array ( [post_title] => AEP INDUSTRIES INC. REPORTS FISCAL 2016 THIRD QUARTER AND YEAR-TO- DATE RESULTS [post_content] => [post_date_gmt] => 2016-09-09 13:27:46 [post_date] => 2016-09-09 13:27:46 [post_modified_gmt] => 2016-09-09 13:27:46 [post_modified] => 2016-09-09 13:27:46 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=761 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/09/aep-industries-inc-reports-fiscal-2016-third-quarter-and-year-to-date-results/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/09/aep-industries-inc-reports-fiscal-2016-third-quarter-and-year-to-date-results/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/tgZbzYuTUaY/ [syndication_item_hash] => cb73fdf27384197084ab02ec6cee9add [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) [post_excerpt] => )

FAF deciding on filters on post to be syndicated:

Berry Plastics Group, Inc. Announces Agreement to Acquire AEP Industries Inc.

Array ( [post_title] => Berry Plastics Group, Inc. Announces Agreement to Acquire AEP Industries Inc. [post_content] => [post_date_gmt] => 2016-08-25 18:44:56 [post_date] => 2016-08-25 18:44:56 [post_modified_gmt] => 2016-08-25 18:44:56 [post_modified] => 2016-08-25 18:44:56 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=757 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/08/berry-plastics-group-inc-announces-agreement-to-acquire-aep-industries-inc/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/08/berry-plastics-group-inc-announces-agreement-to-acquire-aep-industries-inc/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/-sUFD5q4I7c/ [syndication_item_hash] => 0213b9077ea07c3541cdb0f8e73791dd ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/08/berry-plastics-group-inc-announces-agreement-to-acquire-aep-industries-inc/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/08/berry-plastics-group-inc-announces-agreement-to-acquire-aep-industries-inc/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/-sUFD5q4I7c/ [syndication_item_hash] => 0213b9077ea07c3541cdb0f8e73791dd )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Berry Plastics Group, Inc. Announces Agreement to Acquire AEP Industries Inc.

Array ( [post_title] => Berry Plastics Group, Inc. Announces Agreement to Acquire AEP Industries Inc. [post_content] => [post_date_gmt] => 2016-08-25 18:44:56 [post_date] => 2016-08-25 18:44:56 [post_modified_gmt] => 2016-08-25 18:44:56 [post_modified] => 2016-08-25 18:44:56 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=757 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/08/berry-plastics-group-inc-announces-agreement-to-acquire-aep-industries-inc/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/08/berry-plastics-group-inc-announces-agreement-to-acquire-aep-industries-inc/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/-sUFD5q4I7c/ [syndication_item_hash] => 0213b9077ea07c3541cdb0f8e73791dd [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) [post_excerpt] => )

FAF deciding on filters on post to be syndicated:

AEP Industries Inc. Announces Fourth Quarter Fiscal 2016 Dividend

Array ( [post_title] => AEP Industries Inc. Announces Fourth Quarter Fiscal 2016 Dividend [post_content] => [post_date_gmt] => 2016-07-20 13:26:03 [post_date] => 2016-07-20 13:26:03 [post_modified_gmt] => 2016-07-20 13:26:03 [post_modified] => 2016-07-20 13:26:03 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=753 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/07/aep-industries-inc-announces-fourth-quarter-fiscal-2016-dividend/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/07/aep-industries-inc-announces-fourth-quarter-fiscal-2016-dividend/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/eSq1AFnHWmE/ [syndication_item_hash] => 71e8972e3ec81e0dcf61df2c2e2a2008 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/07/aep-industries-inc-announces-fourth-quarter-fiscal-2016-dividend/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/07/aep-industries-inc-announces-fourth-quarter-fiscal-2016-dividend/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/eSq1AFnHWmE/ [syndication_item_hash] => 71e8972e3ec81e0dcf61df2c2e2a2008 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :AEP Industries Inc. Announces Fourth Quarter Fiscal 2016 Dividend

Array ( [post_title] => AEP Industries Inc. Announces Fourth Quarter Fiscal 2016 Dividend [post_content] => [post_date_gmt] => 2016-07-20 13:26:03 [post_date] => 2016-07-20 13:26:03 [post_modified_gmt] => 2016-07-20 13:26:03 [post_modified] => 2016-07-20 13:26:03 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=753 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/07/aep-industries-inc-announces-fourth-quarter-fiscal-2016-dividend/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/07/aep-industries-inc-announces-fourth-quarter-fiscal-2016-dividend/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/eSq1AFnHWmE/ [syndication_item_hash] => 71e8972e3ec81e0dcf61df2c2e2a2008 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) [post_excerpt] => )

FAF deciding on filters on post to be syndicated:

AEP INDUSTRIES INC. REPORTS FISCAL 2016 SECOND QUARTER AND YEAR-TO-DATE RESULTS

Array ( [post_title] => AEP INDUSTRIES INC. REPORTS FISCAL 2016 SECOND QUARTER AND YEAR-TO-DATE RESULTS [post_content] => [post_date_gmt] => 2016-06-09 16:34:09 [post_date] => 2016-06-09 16:34:09 [post_modified_gmt] => 2016-06-09 16:34:09 [post_modified] => 2016-06-09 16:34:09 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=735 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/06/aep-industries-inc-reports-fiscal-2016-second-quarter-and-year-to-date-results/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/06/aep-industries-inc-reports-fiscal-2016-second-quarter-and-year-to-date-results/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/pjDsNpWmCeI/ [syndication_item_hash] => 36ca07ee3f4b1792f26a307fa2180197 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/06/aep-industries-inc-reports-fiscal-2016-second-quarter-and-year-to-date-results/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/06/aep-industries-inc-reports-fiscal-2016-second-quarter-and-year-to-date-results/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/pjDsNpWmCeI/ [syndication_item_hash] => 36ca07ee3f4b1792f26a307fa2180197 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :AEP INDUSTRIES INC. REPORTS FISCAL 2016 SECOND QUARTER AND YEAR-TO-DATE RESULTS

Array ( [post_title] => AEP INDUSTRIES INC. REPORTS FISCAL 2016 SECOND QUARTER AND YEAR-TO-DATE RESULTS [post_content] => [post_date_gmt] => 2016-06-09 16:34:09 [post_date] => 2016-06-09 16:34:09 [post_modified_gmt] => 2016-06-09 16:34:09 [post_modified] => 2016-06-09 16:34:09 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=735 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/06/aep-industries-inc-reports-fiscal-2016-second-quarter-and-year-to-date-results/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/06/aep-industries-inc-reports-fiscal-2016-second-quarter-and-year-to-date-results/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/pjDsNpWmCeI/ [syndication_item_hash] => 36ca07ee3f4b1792f26a307fa2180197 [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) [post_excerpt] => )

FAF deciding on filters on post to be syndicated:

AEP Industries Inc. Announces Third Quarter Fiscal 2016 Dividend

Array ( [post_title] => AEP Industries Inc. Announces Third Quarter Fiscal 2016 Dividend [post_content] => [post_date_gmt] => 2016-04-20 16:23:30 [post_date] => 2016-04-20 16:23:30 [post_modified_gmt] => 2016-04-20 16:23:30 [post_modified] => 2016-04-20 16:23:30 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=727 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/04/aep-industries-inc-announces-third-quarter-fiscal-2016-dividend/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/04/aep-industries-inc-announces-third-quarter-fiscal-2016-dividend/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/ycTiAyVnyzA/ [syndication_item_hash] => 5df82a42bec83ed39f98d47dc18fa37e ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/04/aep-industries-inc-announces-third-quarter-fiscal-2016-dividend/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/04/aep-industries-inc-announces-third-quarter-fiscal-2016-dividend/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/ycTiAyVnyzA/ [syndication_item_hash] => 5df82a42bec83ed39f98d47dc18fa37e )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :AEP Industries Inc. Announces Third Quarter Fiscal 2016 Dividend

Array ( [post_title] => AEP Industries Inc. Announces Third Quarter Fiscal 2016 Dividend [post_content] => [post_date_gmt] => 2016-04-20 16:23:30 [post_date] => 2016-04-20 16:23:30 [post_modified_gmt] => 2016-04-20 16:23:30 [post_modified] => 2016-04-20 16:23:30 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://www.aepinc.com/news/?p=727 [meta] => Array ( [enclosure] => Array ( [0] => ) [syndication_source] => AEP Industries [syndication_source_uri] => http://www.aepinc.com/news [syndication_source_id] => http://feeds.feedburner.com/AEPIndustries [rss:comments] => http://www.aepinc.com/news/2016/04/aep-industries-inc-announces-third-quarter-fiscal-2016-dividend/#comments [wfw:commentRSS] => http://www.aepinc.com/news/2016/04/aep-industries-inc-announces-third-quarter-fiscal-2016-dividend/feed/ [syndication_feed] => http://feeds.feedburner.com/AEPIndustries [syndication_feed_id] => 103 [syndication_permalink] => http://feedproxy.google.com/~r/AEPIndustries/~3/ycTiAyVnyzA/ [syndication_item_hash] => 5df82a42bec83ed39f98d47dc18fa37e [faf_process_image] => ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 613 [1] => 392 ) [post_tag] => Array ( [0] => 3487 ) [post_format] => Array ( ) ) [post_excerpt] => )

FAF deciding on filters on post to be syndicated:

Welcome to ProMach – Panther Industries

Array ( [post_title] => Welcome to ProMach – Panther Industries [post_content] =>

We are super excited that Panther Industries is now part of our ProMach Labeling & Coding team! Like ID Technology, Panther is a manufacturer of both print/apply and decorative labeling systems.

As it happens, the two product lines of very complementary and between us we can now handle even more labeling applications and can build on our already extensive support network.

Of course, ID Technology already operates seven label converting and printing plants, to be able to support all of our labeling hardware anywhere in North America.

Panther print/apply labelers are particularly well suited for the fast-growing e-commerce and logistics market. The all-electric Panther Predator as an example is very successful and offers an alternative approach to labeling variable height products, compared to the ID Technology 350 model. It will be exciting to see how we can work together to continue growing in this important market.

Check out the Panther website here: https://print-n-apply.com/ Cool web address too!

So a huge welcome to our new colleagues from Colorado!

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2020/09/preditor.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/09/preditor.jpg

Image exists, checking for same file size

Replacing images : - ON

We are super excited that Panther Industries is now part of our ProMach Labeling & Coding team! Like ID Technology, Panther is a manufacturer of both print/apply and decorative labeling systems.

As it happens, the two product lines of very complementary and between us we can now handle even more labeling applications and can build on our already extensive support network.

Of course, ID Technology already operates seven label converting and printing plants, to be able to support all of our labeling hardware anywhere in North America.

Panther print/apply labelers are particularly well suited for the fast-growing e-commerce and logistics market. The all-electric Panther Predator as an example is very successful and offers an alternative approach to labeling variable height products, compared to the ID Technology 350 model. It will be exciting to see how we can work together to continue growing in this important market.

Check out the Panther website here: https://print-n-apply.com/ Cool web address too!

So a huge welcome to our new colleagues from Colorado!

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2020/09/welcome-to-promach-panther-industries/ [syndication_item_hash] => bf936457daab7efe77c2ce1b6fcd2436 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Welcome to ProMach – Panther Industries

Array ( [post_title] => Welcome to ProMach – Panther Industries [post_content] =>

We are super excited that Panther Industries is now part of our ProMach Labeling & Coding team! Like ID Technology, Panther is a manufacturer of both print/apply and decorative labeling systems.

As it happens, the two product lines of very complementary and between us we can now handle even more labeling applications and can build on our already extensive support network.

Of course, ID Technology already operates seven label converting and printing plants, to be able to support all of our labeling hardware anywhere in North America.

Panther print/apply labelers are particularly well suited for the fast-growing e-commerce and logistics market. The all-electric Panther Predator as an example is very successful and offers an alternative approach to labeling variable height products, compared to the ID Technology 350 model. It will be exciting to see how we can work together to continue growing in this important market.

Check out the Panther website here: https://print-n-apply.com/ Cool web address too!

So a huge welcome to our new colleagues from Colorado!

FAF deciding on filters on post to be syndicated:

Celebrating 20 Years of Printer Applicator Manufacturing

Array ( [post_title] => Celebrating 20 Years of Printer Applicator Manufacturing [post_content] =>

Twenty years ago (back in 2000), ID Technology launched a new label printer applicator model – the 250.

Until then, ID Technology had been a reseller of other OEMs products – the 250 being the first model designed and built by the company.

This new labeling system was more modular in construction when compared to competing equipment and was easy to use for both operators and mechanics – all at a competitive price.

A large number of customers agreed and the 250 became the best selling print and apply labeler in North America, with a range of applicator modules that enabled it to handle just about every labeling job.

Model 250 Label Printer Applicator

There are still many 250 systems operating – in labeling applications, despite the fact components in the electronics module are getting hard to find.

Today,  the successors of the 250, the ID Technology 252, 255 and 262 carry on the heritage of that original design and remain the best selling product line in the business.

Even more modular, with most adjustments eliminated, the new versions have an enhanced range of applicator modules that can handle even more applicators, at increasingly high speeds.

ID Technology labeling systems are certainly built to last and (when combined with our labels) offer a limited lifetime equipment warranty.

Want to improve your barcode labeling operations? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com to get started!

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2020/08/250-tn-300x300.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/08/250-tn-300x300.jpg

Image exists, checking for same file size

Replacing images : - ON

Twenty years ago (back in 2000), ID Technology launched a new label printer applicator model – the 250.

Until then, ID Technology had been a reseller of other OEMs products – the 250 being the first model designed and built by the company.

This new labeling system was more modular in construction when compared to competing equipment and was easy to use for both operators and mechanics – all at a competitive price.

A large number of customers agreed and the 250 became the best selling print and apply labeler in North America, with a range of applicator modules that enabled it to handle just about every labeling job.

Model 250 Label Printer Applicator

There are still many 250 systems operating – in labeling applications, despite the fact components in the electronics module are getting hard to find.

Today,  the successors of the 250, the ID Technology 252, 255 and 262 carry on the heritage of that original design and remain the best selling product line in the business.

Even more modular, with most adjustments eliminated, the new versions have an enhanced range of applicator modules that can handle even more applicators, at increasingly high speeds.

ID Technology labeling systems are certainly built to last and (when combined with our labels) offer a limited lifetime equipment warranty.

Want to improve your barcode labeling operations? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com to get started!

Local save:http://www.labelingnews.com/wp-content/uploads/2020/08/250-lpa.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/08/250-lpa.jpg

Image exists, checking for same file size

Replacing images : - ON

Twenty years ago (back in 2000), ID Technology launched a new label printer applicator model – the 250.

Until then, ID Technology had been a reseller of other OEMs products – the 250 being the first model designed and built by the company.

This new labeling system was more modular in construction when compared to competing equipment and was easy to use for both operators and mechanics – all at a competitive price.

A large number of customers agreed and the 250 became the best selling print and apply labeler in North America, with a range of applicator modules that enabled it to handle just about every labeling job.

Model 250 Label Printer Applicator

There are still many 250 systems operating – in labeling applications, despite the fact components in the electronics module are getting hard to find.

Today,  the successors of the 250, the ID Technology 252, 255 and 262 carry on the heritage of that original design and remain the best selling product line in the business.

Even more modular, with most adjustments eliminated, the new versions have an enhanced range of applicator modules that can handle even more applicators, at increasingly high speeds.

ID Technology labeling systems are certainly built to last and (when combined with our labels) offer a limited lifetime equipment warranty.

Want to improve your barcode labeling operations? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com to get started!

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2020/08/celebrating-20-years-of-printer-applicator-manufacturing/ [syndication_item_hash] => c8ade87cbe8cfda7cc192f0647861840 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Celebrating 20 Years of Printer Applicator Manufacturing

Array ( [post_title] => Celebrating 20 Years of Printer Applicator Manufacturing [post_content] =>

Twenty years ago (back in 2000), ID Technology launched a new label printer applicator model – the 250.

Until then, ID Technology had been a reseller of other OEMs products – the 250 being the first model designed and built by the company.

This new labeling system was more modular in construction when compared to competing equipment and was easy to use for both operators and mechanics – all at a competitive price.

A large number of customers agreed and the 250 became the best selling print and apply labeler in North America, with a range of applicator modules that enabled it to handle just about every labeling job.

Model 250 Label Printer Applicator

There are still many 250 systems operating – in labeling applications, despite the fact components in the electronics module are getting hard to find.

Today,  the successors of the 250, the ID Technology 252, 255 and 262 carry on the heritage of that original design and remain the best selling product line in the business.

Even more modular, with most adjustments eliminated, the new versions have an enhanced range of applicator modules that can handle even more applicators, at increasingly high speeds.

ID Technology labeling systems are certainly built to last and (when combined with our labels) offer a limited lifetime equipment warranty.

Want to improve your barcode labeling operations? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com to get started!

FAF deciding on filters on post to be syndicated:

New Additions to the ProMach Filling Team

Array ( [post_title] => New Additions to the ProMach Filling Team [post_content] =>

Sure, we are having to deal with a major pandemic at the moment, but it doesn’t mean things have slowed when it comes to growing our business.

Our Filling Business Line has two new members this summer, with the acquisitions of Modern Packaging and Fogg Filler.

These are two highly respected organizations that when combined with our existing filling brands, Federal and Pacific, make ProMach a real leader in the filling equipment sector.

Modern Packaging specializes in filling products into cups and trays for the food and dairy industries. Products handled include yogurt, sour cream, cottage cheese and many more.

The company was founded in 1989 and is located in Deer Park, NY – right in the middle of Long Island.

We’ll be looking forward to seeing Modern equipment as a part of Zarpac packaging lines and we’ve also noted that all those filled cups need date coding!

Fogg Filler, based in Holland, MI was founded in 1956, has grown to be a leader in liquid filling.

Fogg equipment handles a wide range of products including bottled water, antifreeze, dairy products, and much more. As well as stand-alone filling machines, Fogg also builds integrated systems that can include capping and labeling.

Seems to me this is a great fit with our existing products such as Zalkin cappers, PE Labellers, and Pace unscramblers.

Huge thanks to our Corporate Development team for keeping ProMach moving forward, even in the toughest of times! We are looking forward to working with our new colleagues.

Whatever your packaging equipment needs, we can get you connected with the right people – just send email to us IDT@ProMachBuilt.com or you can contact me directly: david.holliday@ProMachBuilt.com

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2020/08/AlwaysGrowing-150x150.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/08/AlwaysGrowing-150x150.jpg

Image exists, checking for same file size

Replacing images : - ON

Sure, we are having to deal with a major pandemic at the moment, but it doesn’t mean things have slowed when it comes to growing our business.

Our Filling Business Line has two new members this summer, with the acquisitions of Modern Packaging and Fogg Filler.

These are two highly respected organizations that when combined with our existing filling brands, Federal and Pacific, make ProMach a real leader in the filling equipment sector.

Modern Packaging specializes in filling products into cups and trays for the food and dairy industries. Products handled include yogurt, sour cream, cottage cheese and many more.

The company was founded in 1989 and is located in Deer Park, NY – right in the middle of Long Island.

We’ll be looking forward to seeing Modern equipment as a part of Zarpac packaging lines and we’ve also noted that all those filled cups need date coding!

Fogg Filler, based in Holland, MI was founded in 1956, has grown to be a leader in liquid filling.

Fogg equipment handles a wide range of products including bottled water, antifreeze, dairy products, and much more. As well as stand-alone filling machines, Fogg also builds integrated systems that can include capping and labeling.

Seems to me this is a great fit with our existing products such as Zalkin cappers, PE Labellers, and Pace unscramblers.

Huge thanks to our Corporate Development team for keeping ProMach moving forward, even in the toughest of times! We are looking forward to working with our new colleagues.

Whatever your packaging equipment needs, we can get you connected with the right people – just send email to us IDT@ProMachBuilt.com or you can contact me directly: david.holliday@ProMachBuilt.com

Local save:http://www.labelingnews.com/wp-content/uploads/2020/08/ModernPackaging2.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/08/ModernPackaging2.jpg

Image exists, checking for same file size

Replacing images : - ON

Sure, we are having to deal with a major pandemic at the moment, but it doesn’t mean things have slowed when it comes to growing our business.

Our Filling Business Line has two new members this summer, with the acquisitions of Modern Packaging and Fogg Filler.

These are two highly respected organizations that when combined with our existing filling brands, Federal and Pacific, make ProMach a real leader in the filling equipment sector.

Modern Packaging specializes in filling products into cups and trays for the food and dairy industries. Products handled include yogurt, sour cream, cottage cheese and many more.

The company was founded in 1989 and is located in Deer Park, NY – right in the middle of Long Island.

We’ll be looking forward to seeing Modern equipment as a part of Zarpac packaging lines and we’ve also noted that all those filled cups need date coding!

Fogg Filler, based in Holland, MI was founded in 1956, has grown to be a leader in liquid filling.

Fogg equipment handles a wide range of products including bottled water, antifreeze, dairy products, and much more. As well as stand-alone filling machines, Fogg also builds integrated systems that can include capping and labeling.

Seems to me this is a great fit with our existing products such as Zalkin cappers, PE Labellers, and Pace unscramblers.

Huge thanks to our Corporate Development team for keeping ProMach moving forward, even in the toughest of times! We are looking forward to working with our new colleagues.

Whatever your packaging equipment needs, we can get you connected with the right people – just send email to us IDT@ProMachBuilt.com or you can contact me directly: david.holliday@ProMachBuilt.com

Local save:http://www.labelingnews.com/wp-content/uploads/2020/08/FoggFiller.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/08/FoggFiller.jpg

Image exists, checking for same file size

Replacing images : - ON

Sure, we are having to deal with a major pandemic at the moment, but it doesn’t mean things have slowed when it comes to growing our business.

Our Filling Business Line has two new members this summer, with the acquisitions of Modern Packaging and Fogg Filler.

These are two highly respected organizations that when combined with our existing filling brands, Federal and Pacific, make ProMach a real leader in the filling equipment sector.

Modern Packaging specializes in filling products into cups and trays for the food and dairy industries. Products handled include yogurt, sour cream, cottage cheese and many more.

The company was founded in 1989 and is located in Deer Park, NY – right in the middle of Long Island.

We’ll be looking forward to seeing Modern equipment as a part of Zarpac packaging lines and we’ve also noted that all those filled cups need date coding!

Fogg Filler, based in Holland, MI was founded in 1956, has grown to be a leader in liquid filling.

Fogg equipment handles a wide range of products including bottled water, antifreeze, dairy products, and much more. As well as stand-alone filling machines, Fogg also builds integrated systems that can include capping and labeling.

Seems to me this is a great fit with our existing products such as Zalkin cappers, PE Labellers, and Pace unscramblers.

Huge thanks to our Corporate Development team for keeping ProMach moving forward, even in the toughest of times! We are looking forward to working with our new colleagues.

Whatever your packaging equipment needs, we can get you connected with the right people – just send email to us IDT@ProMachBuilt.com or you can contact me directly: david.holliday@ProMachBuilt.com

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2020/08/new-additions-to-the-promach-filling-team/ [syndication_item_hash] => 81384a698678f0df9c0cbe5a61823d35 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :New Additions to the ProMach Filling Team

Array ( [post_title] => New Additions to the ProMach Filling Team [post_content] =>

Sure, we are having to deal with a major pandemic at the moment, but it doesn’t mean things have slowed when it comes to growing our business.

Our Filling Business Line has two new members this summer, with the acquisitions of Modern Packaging and Fogg Filler.

These are two highly respected organizations that when combined with our existing filling brands, Federal and Pacific, make ProMach a real leader in the filling equipment sector.

Modern Packaging specializes in filling products into cups and trays for the food and dairy industries. Products handled include yogurt, sour cream, cottage cheese and many more.

The company was founded in 1989 and is located in Deer Park, NY – right in the middle of Long Island.

We’ll be looking forward to seeing Modern equipment as a part of Zarpac packaging lines and we’ve also noted that all those filled cups need date coding!

Fogg Filler, based in Holland, MI was founded in 1956, has grown to be a leader in liquid filling.

Fogg equipment handles a wide range of products including bottled water, antifreeze, dairy products, and much more. As well as stand-alone filling machines, Fogg also builds integrated systems that can include capping and labeling.

Seems to me this is a great fit with our existing products such as Zalkin cappers, PE Labellers, and Pace unscramblers.

Huge thanks to our Corporate Development team for keeping ProMach moving forward, even in the toughest of times! We are looking forward to working with our new colleagues.

Whatever your packaging equipment needs, we can get you connected with the right people – just send email to us IDT@ProMachBuilt.com or you can contact me directly: david.holliday@ProMachBuilt.com

FAF deciding on filters on post to be syndicated:

PackExpo Connects 2020

Array ( [post_title] => PackExpo Connects 2020 [post_content] =>

So PMMI finally announced the cancelation of PackExpo in Chicago – to absolutely no one’s surprise.

For everyone’s health, this is obviously a good thing, and it is interesting to see that there will still be a PackExpo – the PackExpo Connects Virtual Event.

It is going to be really interesting to see how this comes together – virtual tradeshows are clearly not a complete replacement for the real thing, but PMMI is promising a mix of live chats, online demos and other features to make the event as complete and interactive as possible.

I think this will be like many there things – the more we all put into it (either as exhibitors or visitors) the better it will be for everyone.

Do you usually attend the physical PackExpo shows? If so, will you be checking out the virtual version?

For more info, check out the PackExpo website here: https://www.packexpointernational.com/

We’ll be providing more info on ProMach’s participation at PackExpo Connects before too long.

See you online!!

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2020/08/PackExpoConnect-banner.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/08/PackExpoConnect-banner.jpg

Image exists, checking for same file size

Replacing images : - ON

So PMMI finally announced the cancelation of PackExpo in Chicago – to absolutely no one’s surprise.

For everyone’s health, this is obviously a good thing, and it is interesting to see that there will still be a PackExpo – the PackExpo Connects Virtual Event.

It is going to be really interesting to see how this comes together – virtual tradeshows are clearly not a complete replacement for the real thing, but PMMI is promising a mix of live chats, online demos and other features to make the event as complete and interactive as possible.

I think this will be like many there things – the more we all put into it (either as exhibitors or visitors) the better it will be for everyone.

Do you usually attend the physical PackExpo shows? If so, will you be checking out the virtual version?

For more info, check out the PackExpo website here: https://www.packexpointernational.com/

We’ll be providing more info on ProMach’s participation at PackExpo Connects before too long.

See you online!!

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2020/08/packexpo-connect-2020/ [syndication_item_hash] => 2df35c08c9f5eee358d3b38d08a9b3a2 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :PackExpo Connects 2020

Array ( [post_title] => PackExpo Connects 2020 [post_content] =>

So PMMI finally announced the cancelation of PackExpo in Chicago – to absolutely no one’s surprise.

For everyone’s health, this is obviously a good thing, and it is interesting to see that there will still be a PackExpo – the PackExpo Connects Virtual Event.

It is going to be really interesting to see how this comes together – virtual tradeshows are clearly not a complete replacement for the real thing, but PMMI is promising a mix of live chats, online demos and other features to make the event as complete and interactive as possible.

I think this will be like many there things – the more we all put into it (either as exhibitors or visitors) the better it will be for everyone.

Do you usually attend the physical PackExpo shows? If so, will you be checking out the virtual version?

For more info, check out the PackExpo website here: https://www.packexpointernational.com/

We’ll be providing more info on ProMach’s participation at PackExpo Connects before too long.

See you online!!

FAF deciding on filters on post to be syndicated:

Improve Productivity, Sustainability with New Labels

Array ( [post_title] => Improve Productivity, Sustainability with New Labels [post_content] =>

Can changing the label material you use for your barcode labeling make a big difference to your operations?

It certainly can, if you switch to ID Technology’s new AutoSeries EX label stock.

AutoSeries EX is the new label product line from ID Technology – designed to enhance your print and apply labeling for secondary packaging and logistics. 

Utilizing a smoother and denser liner, AutoSeries EX labels improve productivity, performance, and sustainability – all while using the same proven facesheet materials and adhesive weights, so there is no compromise on printing or application performance.

AutoSeries EX material is available for both thermal transfer and direct thermal printing and in standard paper as well as synthetics.

EX-tended Productivity

EX materials provide 20% more labels per roll, resulting in less downtime for label roll changes. 

Stopping for label roll replenishment only takes a few minutes but it adds up over the course of a year.

The following example demonstrates the EX advantage benefit, when using a 4.000 X 6.000 label and a 14” OD roll configuration – based on 5 million labels per year.

Reduce Downtime With AutoSeries EX Labels

EX-tended Performance

EX materials utilize a smoother and denser liner.  These properties allow for more consistent diecut depth, cleaner label release, and less adhesive buildup over time.  Customers benefit from a higher-performing product and reduced maintenance requirements.

The die-cutting performance of AutoSeries EX helps us get you the possible quality labels – every time!

EX-tended Sustainability

As the need for environmental sustainability continues to increase, brands are looking for ways to make their operations greener. 

Labels made from AutoSeries EX materials, yield a 30% reduction in label landfill waste – thanks to the thinner, denser liner. 

In addition, winding more labels per roll allows more labels to be packed per pallet – translating to fewer shipments (and therefore reduced carbon emissions) per year. 

Want to make an even bigger contribution to reducing landfill waste?

Consider switching to direct thermal labels as an alternative to thermal transfer. A company printing 5,000.000 4 x 6 inch thermal transfer labels per year is adding 2.5 million feet of ribbon waste to their local landfill per year! 

Obviously using direct thermal labels also has the advantage of having one less consumable item (the thermal transfer ribbon) to change, reducing roll change time, and improving productivity.

Sometimes You Can Have it All!

Because the price of the new AutoSeries EX labels is unchanged from our conventional labels, our customers are in a great position to enjoy the advantages this new range of materials brings.

The existing features of our AutoSeries labels, clear leaders and trailers, label/ribbon kits for thermal transfer – matched lengths of label and ribbon rolls to reduce stoppages for replenishment and of course our Lifetime Limited Equipment Warranty for customers who use our labels on ID Technology labeling machines.

Want to get started? Contact your ID Technology sales manager or feel free to send me email to David.Holliday@ProMachBuilt.com

Get ready to improve your labeling efficiency and sustainability efforts!

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2020/08/unwound-labels-white.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/08/unwound-labels-white.jpg

Image exists, checking for same file size

Replacing images : - ON

Can changing the label material you use for your barcode labeling make a big difference to your operations?

It certainly can, if you switch to ID Technology’s new AutoSeries EX label stock.

AutoSeries EX is the new label product line from ID Technology – designed to enhance your print and apply labeling for secondary packaging and logistics. 

Utilizing a smoother and denser liner, AutoSeries EX labels improve productivity, performance, and sustainability – all while using the same proven facesheet materials and adhesive weights, so there is no compromise on printing or application performance.

AutoSeries EX material is available for both thermal transfer and direct thermal printing and in standard paper as well as synthetics.

EX-tended Productivity

EX materials provide 20% more labels per roll, resulting in less downtime for label roll changes. 

Stopping for label roll replenishment only takes a few minutes but it adds up over the course of a year.

The following example demonstrates the EX advantage benefit, when using a 4.000 X 6.000 label and a 14” OD roll configuration – based on 5 million labels per year.

Reduce Downtime With AutoSeries EX Labels

EX-tended Performance

EX materials utilize a smoother and denser liner.  These properties allow for more consistent diecut depth, cleaner label release, and less adhesive buildup over time.  Customers benefit from a higher-performing product and reduced maintenance requirements.

The die-cutting performance of AutoSeries EX helps us get you the possible quality labels – every time!

EX-tended Sustainability

As the need for environmental sustainability continues to increase, brands are looking for ways to make their operations greener. 

Labels made from AutoSeries EX materials, yield a 30% reduction in label landfill waste – thanks to the thinner, denser liner. 

In addition, winding more labels per roll allows more labels to be packed per pallet – translating to fewer shipments (and therefore reduced carbon emissions) per year. 

Want to make an even bigger contribution to reducing landfill waste?

Consider switching to direct thermal labels as an alternative to thermal transfer. A company printing 5,000.000 4 x 6 inch thermal transfer labels per year is adding 2.5 million feet of ribbon waste to their local landfill per year! 

Obviously using direct thermal labels also has the advantage of having one less consumable item (the thermal transfer ribbon) to change, reducing roll change time, and improving productivity.

Sometimes You Can Have it All!

Because the price of the new AutoSeries EX labels is unchanged from our conventional labels, our customers are in a great position to enjoy the advantages this new range of materials brings.

The existing features of our AutoSeries labels, clear leaders and trailers, label/ribbon kits for thermal transfer – matched lengths of label and ribbon rolls to reduce stoppages for replenishment and of course our Lifetime Limited Equipment Warranty for customers who use our labels on ID Technology labeling machines.

Want to get started? Contact your ID Technology sales manager or feel free to send me email to David.Holliday@ProMachBuilt.com

Get ready to improve your labeling efficiency and sustainability efforts!

Local save:http://www.labelingnews.com/wp-content/uploads/2020/08/gears-150x150.png

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/08/gears-150x150.png

Image exists, checking for same file size

Replacing images : - ON

Can changing the label material you use for your barcode labeling make a big difference to your operations?

It certainly can, if you switch to ID Technology’s new AutoSeries EX label stock.

AutoSeries EX is the new label product line from ID Technology – designed to enhance your print and apply labeling for secondary packaging and logistics. 

Utilizing a smoother and denser liner, AutoSeries EX labels improve productivity, performance, and sustainability – all while using the same proven facesheet materials and adhesive weights, so there is no compromise on printing or application performance.

AutoSeries EX material is available for both thermal transfer and direct thermal printing and in standard paper as well as synthetics.

EX-tended Productivity

EX materials provide 20% more labels per roll, resulting in less downtime for label roll changes. 

Stopping for label roll replenishment only takes a few minutes but it adds up over the course of a year.

The following example demonstrates the EX advantage benefit, when using a 4.000 X 6.000 label and a 14” OD roll configuration – based on 5 million labels per year.

Reduce Downtime With AutoSeries EX Labels

EX-tended Performance

EX materials utilize a smoother and denser liner.  These properties allow for more consistent diecut depth, cleaner label release, and less adhesive buildup over time.  Customers benefit from a higher-performing product and reduced maintenance requirements.

The die-cutting performance of AutoSeries EX helps us get you the possible quality labels – every time!

EX-tended Sustainability

As the need for environmental sustainability continues to increase, brands are looking for ways to make their operations greener. 

Labels made from AutoSeries EX materials, yield a 30% reduction in label landfill waste – thanks to the thinner, denser liner. 

In addition, winding more labels per roll allows more labels to be packed per pallet – translating to fewer shipments (and therefore reduced carbon emissions) per year. 

Want to make an even bigger contribution to reducing landfill waste?

Consider switching to direct thermal labels as an alternative to thermal transfer. A company printing 5,000.000 4 x 6 inch thermal transfer labels per year is adding 2.5 million feet of ribbon waste to their local landfill per year! 

Obviously using direct thermal labels also has the advantage of having one less consumable item (the thermal transfer ribbon) to change, reducing roll change time, and improving productivity.

Sometimes You Can Have it All!

Because the price of the new AutoSeries EX labels is unchanged from our conventional labels, our customers are in a great position to enjoy the advantages this new range of materials brings.

The existing features of our AutoSeries labels, clear leaders and trailers, label/ribbon kits for thermal transfer – matched lengths of label and ribbon rolls to reduce stoppages for replenishment and of course our Lifetime Limited Equipment Warranty for customers who use our labels on ID Technology labeling machines.

Want to get started? Contact your ID Technology sales manager or feel free to send me email to David.Holliday@ProMachBuilt.com

Get ready to improve your labeling efficiency and sustainability efforts!

Local save:http://www.labelingnews.com/wp-content/uploads/2020/08/downtime.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/08/downtime.jpg

Image exists, checking for same file size

Replacing images : - ON

Can changing the label material you use for your barcode labeling make a big difference to your operations?

It certainly can, if you switch to ID Technology’s new AutoSeries EX label stock.

AutoSeries EX is the new label product line from ID Technology – designed to enhance your print and apply labeling for secondary packaging and logistics. 

Utilizing a smoother and denser liner, AutoSeries EX labels improve productivity, performance, and sustainability – all while using the same proven facesheet materials and adhesive weights, so there is no compromise on printing or application performance.

AutoSeries EX material is available for both thermal transfer and direct thermal printing and in standard paper as well as synthetics.

EX-tended Productivity

EX materials provide 20% more labels per roll, resulting in less downtime for label roll changes. 

Stopping for label roll replenishment only takes a few minutes but it adds up over the course of a year.

The following example demonstrates the EX advantage benefit, when using a 4.000 X 6.000 label and a 14” OD roll configuration – based on 5 million labels per year.

Reduce Downtime With AutoSeries EX Labels

EX-tended Performance

EX materials utilize a smoother and denser liner.  These properties allow for more consistent diecut depth, cleaner label release, and less adhesive buildup over time.  Customers benefit from a higher-performing product and reduced maintenance requirements.

The die-cutting performance of AutoSeries EX helps us get you the possible quality labels – every time!

EX-tended Sustainability

As the need for environmental sustainability continues to increase, brands are looking for ways to make their operations greener. 

Labels made from AutoSeries EX materials, yield a 30% reduction in label landfill waste – thanks to the thinner, denser liner. 

In addition, winding more labels per roll allows more labels to be packed per pallet – translating to fewer shipments (and therefore reduced carbon emissions) per year. 

Want to make an even bigger contribution to reducing landfill waste?

Consider switching to direct thermal labels as an alternative to thermal transfer. A company printing 5,000.000 4 x 6 inch thermal transfer labels per year is adding 2.5 million feet of ribbon waste to their local landfill per year! 

Obviously using direct thermal labels also has the advantage of having one less consumable item (the thermal transfer ribbon) to change, reducing roll change time, and improving productivity.

Sometimes You Can Have it All!

Because the price of the new AutoSeries EX labels is unchanged from our conventional labels, our customers are in a great position to enjoy the advantages this new range of materials brings.

The existing features of our AutoSeries labels, clear leaders and trailers, label/ribbon kits for thermal transfer – matched lengths of label and ribbon rolls to reduce stoppages for replenishment and of course our Lifetime Limited Equipment Warranty for customers who use our labels on ID Technology labeling machines.

Want to get started? Contact your ID Technology sales manager or feel free to send me email to David.Holliday@ProMachBuilt.com

Get ready to improve your labeling efficiency and sustainability efforts!

Local save:http://www.labelingnews.com/wp-content/uploads/2020/08/profit-150x150.png

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/08/profit-150x150.png

Image exists, checking for same file size

Replacing images : - ON

Can changing the label material you use for your barcode labeling make a big difference to your operations?

It certainly can, if you switch to ID Technology’s new AutoSeries EX label stock.

AutoSeries EX is the new label product line from ID Technology – designed to enhance your print and apply labeling for secondary packaging and logistics. 

Utilizing a smoother and denser liner, AutoSeries EX labels improve productivity, performance, and sustainability – all while using the same proven facesheet materials and adhesive weights, so there is no compromise on printing or application performance.

AutoSeries EX material is available for both thermal transfer and direct thermal printing and in standard paper as well as synthetics.

EX-tended Productivity

EX materials provide 20% more labels per roll, resulting in less downtime for label roll changes. 

Stopping for label roll replenishment only takes a few minutes but it adds up over the course of a year.

The following example demonstrates the EX advantage benefit, when using a 4.000 X 6.000 label and a 14” OD roll configuration – based on 5 million labels per year.

Reduce Downtime With AutoSeries EX Labels

EX-tended Performance

EX materials utilize a smoother and denser liner.  These properties allow for more consistent diecut depth, cleaner label release, and less adhesive buildup over time.  Customers benefit from a higher-performing product and reduced maintenance requirements.

The die-cutting performance of AutoSeries EX helps us get you the possible quality labels – every time!

EX-tended Sustainability

As the need for environmental sustainability continues to increase, brands are looking for ways to make their operations greener. 

Labels made from AutoSeries EX materials, yield a 30% reduction in label landfill waste – thanks to the thinner, denser liner. 

In addition, winding more labels per roll allows more labels to be packed per pallet – translating to fewer shipments (and therefore reduced carbon emissions) per year. 

Want to make an even bigger contribution to reducing landfill waste?

Consider switching to direct thermal labels as an alternative to thermal transfer. A company printing 5,000.000 4 x 6 inch thermal transfer labels per year is adding 2.5 million feet of ribbon waste to their local landfill per year! 

Obviously using direct thermal labels also has the advantage of having one less consumable item (the thermal transfer ribbon) to change, reducing roll change time, and improving productivity.

Sometimes You Can Have it All!

Because the price of the new AutoSeries EX labels is unchanged from our conventional labels, our customers are in a great position to enjoy the advantages this new range of materials brings.

The existing features of our AutoSeries labels, clear leaders and trailers, label/ribbon kits for thermal transfer – matched lengths of label and ribbon rolls to reduce stoppages for replenishment and of course our Lifetime Limited Equipment Warranty for customers who use our labels on ID Technology labeling machines.

Want to get started? Contact your ID Technology sales manager or feel free to send me email to David.Holliday@ProMachBuilt.com

Get ready to improve your labeling efficiency and sustainability efforts!

Local save:http://www.labelingnews.com/wp-content/uploads/2020/08/diecut.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/08/diecut.jpg

Image exists, checking for same file size

Replacing images : - ON

Can changing the label material you use for your barcode labeling make a big difference to your operations?

It certainly can, if you switch to ID Technology’s new AutoSeries EX label stock.

AutoSeries EX is the new label product line from ID Technology – designed to enhance your print and apply labeling for secondary packaging and logistics. 

Utilizing a smoother and denser liner, AutoSeries EX labels improve productivity, performance, and sustainability – all while using the same proven facesheet materials and adhesive weights, so there is no compromise on printing or application performance.

AutoSeries EX material is available for both thermal transfer and direct thermal printing and in standard paper as well as synthetics.

EX-tended Productivity

EX materials provide 20% more labels per roll, resulting in less downtime for label roll changes. 

Stopping for label roll replenishment only takes a few minutes but it adds up over the course of a year.

The following example demonstrates the EX advantage benefit, when using a 4.000 X 6.000 label and a 14” OD roll configuration – based on 5 million labels per year.

Reduce Downtime With AutoSeries EX Labels

EX-tended Performance

EX materials utilize a smoother and denser liner.  These properties allow for more consistent diecut depth, cleaner label release, and less adhesive buildup over time.  Customers benefit from a higher-performing product and reduced maintenance requirements.

The die-cutting performance of AutoSeries EX helps us get you the possible quality labels – every time!

EX-tended Sustainability

As the need for environmental sustainability continues to increase, brands are looking for ways to make their operations greener. 

Labels made from AutoSeries EX materials, yield a 30% reduction in label landfill waste – thanks to the thinner, denser liner. 

In addition, winding more labels per roll allows more labels to be packed per pallet – translating to fewer shipments (and therefore reduced carbon emissions) per year. 

Want to make an even bigger contribution to reducing landfill waste?

Consider switching to direct thermal labels as an alternative to thermal transfer. A company printing 5,000.000 4 x 6 inch thermal transfer labels per year is adding 2.5 million feet of ribbon waste to their local landfill per year! 

Obviously using direct thermal labels also has the advantage of having one less consumable item (the thermal transfer ribbon) to change, reducing roll change time, and improving productivity.

Sometimes You Can Have it All!

Because the price of the new AutoSeries EX labels is unchanged from our conventional labels, our customers are in a great position to enjoy the advantages this new range of materials brings.

The existing features of our AutoSeries labels, clear leaders and trailers, label/ribbon kits for thermal transfer – matched lengths of label and ribbon rolls to reduce stoppages for replenishment and of course our Lifetime Limited Equipment Warranty for customers who use our labels on ID Technology labeling machines.

Want to get started? Contact your ID Technology sales manager or feel free to send me email to David.Holliday@ProMachBuilt.com

Get ready to improve your labeling efficiency and sustainability efforts!

Local save:http://www.labelingnews.com/wp-content/uploads/2020/08/green-copy-150x150.png

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/08/green-copy-150x150.png

Image exists, checking for same file size

Replacing images : - ON

Can changing the label material you use for your barcode labeling make a big difference to your operations?

It certainly can, if you switch to ID Technology’s new AutoSeries EX label stock.

AutoSeries EX is the new label product line from ID Technology – designed to enhance your print and apply labeling for secondary packaging and logistics. 

Utilizing a smoother and denser liner, AutoSeries EX labels improve productivity, performance, and sustainability – all while using the same proven facesheet materials and adhesive weights, so there is no compromise on printing or application performance.

AutoSeries EX material is available for both thermal transfer and direct thermal printing and in standard paper as well as synthetics.

EX-tended Productivity

EX materials provide 20% more labels per roll, resulting in less downtime for label roll changes. 

Stopping for label roll replenishment only takes a few minutes but it adds up over the course of a year.

The following example demonstrates the EX advantage benefit, when using a 4.000 X 6.000 label and a 14” OD roll configuration – based on 5 million labels per year.

Reduce Downtime With AutoSeries EX Labels

EX-tended Performance

EX materials utilize a smoother and denser liner.  These properties allow for more consistent diecut depth, cleaner label release, and less adhesive buildup over time.  Customers benefit from a higher-performing product and reduced maintenance requirements.

The die-cutting performance of AutoSeries EX helps us get you the possible quality labels – every time!

EX-tended Sustainability

As the need for environmental sustainability continues to increase, brands are looking for ways to make their operations greener. 

Labels made from AutoSeries EX materials, yield a 30% reduction in label landfill waste – thanks to the thinner, denser liner. 

In addition, winding more labels per roll allows more labels to be packed per pallet – translating to fewer shipments (and therefore reduced carbon emissions) per year. 

Want to make an even bigger contribution to reducing landfill waste?

Consider switching to direct thermal labels as an alternative to thermal transfer. A company printing 5,000.000 4 x 6 inch thermal transfer labels per year is adding 2.5 million feet of ribbon waste to their local landfill per year! 

Obviously using direct thermal labels also has the advantage of having one less consumable item (the thermal transfer ribbon) to change, reducing roll change time, and improving productivity.

Sometimes You Can Have it All!

Because the price of the new AutoSeries EX labels is unchanged from our conventional labels, our customers are in a great position to enjoy the advantages this new range of materials brings.

The existing features of our AutoSeries labels, clear leaders and trailers, label/ribbon kits for thermal transfer – matched lengths of label and ribbon rolls to reduce stoppages for replenishment and of course our Lifetime Limited Equipment Warranty for customers who use our labels on ID Technology labeling machines.

Want to get started? Contact your ID Technology sales manager or feel free to send me email to David.Holliday@ProMachBuilt.com

Get ready to improve your labeling efficiency and sustainability efforts!

Local save:http://www.labelingnews.com/wp-content/uploads/2020/08/shipmentsavings-1.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/08/shipmentsavings-1.jpg

Image exists, checking for same file size

Replacing images : - ON

Can changing the label material you use for your barcode labeling make a big difference to your operations?

It certainly can, if you switch to ID Technology’s new AutoSeries EX label stock.

AutoSeries EX is the new label product line from ID Technology – designed to enhance your print and apply labeling for secondary packaging and logistics. 

Utilizing a smoother and denser liner, AutoSeries EX labels improve productivity, performance, and sustainability – all while using the same proven facesheet materials and adhesive weights, so there is no compromise on printing or application performance.

AutoSeries EX material is available for both thermal transfer and direct thermal printing and in standard paper as well as synthetics.

EX-tended Productivity

EX materials provide 20% more labels per roll, resulting in less downtime for label roll changes. 

Stopping for label roll replenishment only takes a few minutes but it adds up over the course of a year.

The following example demonstrates the EX advantage benefit, when using a 4.000 X 6.000 label and a 14” OD roll configuration – based on 5 million labels per year.

Reduce Downtime With AutoSeries EX Labels

EX-tended Performance

EX materials utilize a smoother and denser liner.  These properties allow for more consistent diecut depth, cleaner label release, and less adhesive buildup over time.  Customers benefit from a higher-performing product and reduced maintenance requirements.

The die-cutting performance of AutoSeries EX helps us get you the possible quality labels – every time!

EX-tended Sustainability

As the need for environmental sustainability continues to increase, brands are looking for ways to make their operations greener. 

Labels made from AutoSeries EX materials, yield a 30% reduction in label landfill waste – thanks to the thinner, denser liner. 

In addition, winding more labels per roll allows more labels to be packed per pallet – translating to fewer shipments (and therefore reduced carbon emissions) per year. 

Want to make an even bigger contribution to reducing landfill waste?

Consider switching to direct thermal labels as an alternative to thermal transfer. A company printing 5,000.000 4 x 6 inch thermal transfer labels per year is adding 2.5 million feet of ribbon waste to their local landfill per year! 

Obviously using direct thermal labels also has the advantage of having one less consumable item (the thermal transfer ribbon) to change, reducing roll change time, and improving productivity.

Sometimes You Can Have it All!

Because the price of the new AutoSeries EX labels is unchanged from our conventional labels, our customers are in a great position to enjoy the advantages this new range of materials brings.

The existing features of our AutoSeries labels, clear leaders and trailers, label/ribbon kits for thermal transfer – matched lengths of label and ribbon rolls to reduce stoppages for replenishment and of course our Lifetime Limited Equipment Warranty for customers who use our labels on ID Technology labeling machines.

Want to get started? Contact your ID Technology sales manager or feel free to send me email to David.Holliday@ProMachBuilt.com

Get ready to improve your labeling efficiency and sustainability efforts!

Local save:http://www.labelingnews.com/wp-content/uploads/2020/08/DT-Savings.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/08/DT-Savings.jpg

Image exists, checking for same file size

Replacing images : - ON

Can changing the label material you use for your barcode labeling make a big difference to your operations?

It certainly can, if you switch to ID Technology’s new AutoSeries EX label stock.

AutoSeries EX is the new label product line from ID Technology – designed to enhance your print and apply labeling for secondary packaging and logistics. 

Utilizing a smoother and denser liner, AutoSeries EX labels improve productivity, performance, and sustainability – all while using the same proven facesheet materials and adhesive weights, so there is no compromise on printing or application performance.

AutoSeries EX material is available for both thermal transfer and direct thermal printing and in standard paper as well as synthetics.

EX-tended Productivity

EX materials provide 20% more labels per roll, resulting in less downtime for label roll changes. 

Stopping for label roll replenishment only takes a few minutes but it adds up over the course of a year.

The following example demonstrates the EX advantage benefit, when using a 4.000 X 6.000 label and a 14” OD roll configuration – based on 5 million labels per year.

Reduce Downtime With AutoSeries EX Labels

EX-tended Performance

EX materials utilize a smoother and denser liner.  These properties allow for more consistent diecut depth, cleaner label release, and less adhesive buildup over time.  Customers benefit from a higher-performing product and reduced maintenance requirements.

The die-cutting performance of AutoSeries EX helps us get you the possible quality labels – every time!

EX-tended Sustainability

As the need for environmental sustainability continues to increase, brands are looking for ways to make their operations greener. 

Labels made from AutoSeries EX materials, yield a 30% reduction in label landfill waste – thanks to the thinner, denser liner. 

In addition, winding more labels per roll allows more labels to be packed per pallet – translating to fewer shipments (and therefore reduced carbon emissions) per year. 

Want to make an even bigger contribution to reducing landfill waste?

Consider switching to direct thermal labels as an alternative to thermal transfer. A company printing 5,000.000 4 x 6 inch thermal transfer labels per year is adding 2.5 million feet of ribbon waste to their local landfill per year! 

Obviously using direct thermal labels also has the advantage of having one less consumable item (the thermal transfer ribbon) to change, reducing roll change time, and improving productivity.

Sometimes You Can Have it All!

Because the price of the new AutoSeries EX labels is unchanged from our conventional labels, our customers are in a great position to enjoy the advantages this new range of materials brings.

The existing features of our AutoSeries labels, clear leaders and trailers, label/ribbon kits for thermal transfer – matched lengths of label and ribbon rolls to reduce stoppages for replenishment and of course our Lifetime Limited Equipment Warranty for customers who use our labels on ID Technology labeling machines.

Want to get started? Contact your ID Technology sales manager or feel free to send me email to David.Holliday@ProMachBuilt.com

Get ready to improve your labeling efficiency and sustainability efforts!

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2020/08/improve-productivity-sustainability-with-new-labels/ [syndication_item_hash] => 140e611c761f5566aa5c9eb71ebfa72d )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Improve Productivity, Sustainability with New Labels

Array ( [post_title] => Improve Productivity, Sustainability with New Labels [post_content] =>

Can changing the label material you use for your barcode labeling make a big difference to your operations?

It certainly can, if you switch to ID Technology’s new AutoSeries EX label stock.

AutoSeries EX is the new label product line from ID Technology – designed to enhance your print and apply labeling for secondary packaging and logistics. 

Utilizing a smoother and denser liner, AutoSeries EX labels improve productivity, performance, and sustainability – all while using the same proven facesheet materials and adhesive weights, so there is no compromise on printing or application performance.

AutoSeries EX material is available for both thermal transfer and direct thermal printing and in standard paper as well as synthetics.

EX-tended Productivity

EX materials provide 20% more labels per roll, resulting in less downtime for label roll changes. 

Stopping for label roll replenishment only takes a few minutes but it adds up over the course of a year.

The following example demonstrates the EX advantage benefit, when using a 4.000 X 6.000 label and a 14” OD roll configuration – based on 5 million labels per year.

Reduce Downtime With AutoSeries EX Labels

EX-tended Performance

EX materials utilize a smoother and denser liner.  These properties allow for more consistent diecut depth, cleaner label release, and less adhesive buildup over time.  Customers benefit from a higher-performing product and reduced maintenance requirements.

The die-cutting performance of AutoSeries EX helps us get you the possible quality labels – every time!

EX-tended Sustainability

As the need for environmental sustainability continues to increase, brands are looking for ways to make their operations greener. 

Labels made from AutoSeries EX materials, yield a 30% reduction in label landfill waste – thanks to the thinner, denser liner. 

In addition, winding more labels per roll allows more labels to be packed per pallet – translating to fewer shipments (and therefore reduced carbon emissions) per year. 

Want to make an even bigger contribution to reducing landfill waste?

Consider switching to direct thermal labels as an alternative to thermal transfer. A company printing 5,000.000 4 x 6 inch thermal transfer labels per year is adding 2.5 million feet of ribbon waste to their local landfill per year! 

Obviously using direct thermal labels also has the advantage of having one less consumable item (the thermal transfer ribbon) to change, reducing roll change time, and improving productivity.

Sometimes You Can Have it All!

Because the price of the new AutoSeries EX labels is unchanged from our conventional labels, our customers are in a great position to enjoy the advantages this new range of materials brings.

The existing features of our AutoSeries labels, clear leaders and trailers, label/ribbon kits for thermal transfer – matched lengths of label and ribbon rolls to reduce stoppages for replenishment and of course our Lifetime Limited Equipment Warranty for customers who use our labels on ID Technology labeling machines.

Want to get started? Contact your ID Technology sales manager or feel free to send me email to David.Holliday@ProMachBuilt.com

Get ready to improve your labeling efficiency and sustainability efforts!

FAF deciding on filters on post to be syndicated:

Video – Solving Labeling Problems

Array ( [post_title] => Video – Solving Labeling Problems [post_content] =>

Printing and applying labels so secondary packaging has usually involved some compromises.

Our super new CrossMerge concept shows that (at least a lot of the time) you can have it all.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2020/08/video-solving-labeling-problems/ [syndication_item_hash] => 1dcda9a19c1955a6604167c46afedbe4 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Video – Solving Labeling Problems

Array ( [post_title] => Video – Solving Labeling Problems [post_content] =>

Printing and applying labels so secondary packaging has usually involved some compromises.

Our super new CrossMerge concept shows that (at least a lot of the time) you can have it all.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

FAF deciding on filters on post to be syndicated:

The Evolution of Print – Apply Labeling

Array ( [post_title] => The Evolution of Print – Apply Labeling [post_content] =>

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

• more output from packaging lines.
• higher efficiency and less downtime.
• best possible barcode quality for GS1 compliance.
• minimize the total cost of ownership.

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMerge

To address some of these issues, ID Technology introduced PowerMerge.

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

• the label is fed with the narrow side across the web – this means that more material has to pass through the printer for each print cycle.
• this orientation gives fewer labels per roll.
• not the ideal orientation for the best barcode quality.

Introducing CrossMerge

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

• Like, PowerMerge, the print speed is disconnect from the application speed, allowing the printer to run at a slower speed than is usual – while still proving higher outputs.
• Lower speed causes less wear (and consequently maintenance requirement) and provides the best print quality.
• Improved ISO/ANSI barcode verification scores.
• Up to twice as many labels per roll (4×2 label compared to conventional wipe-on labeling).
• Up to twice as many labels printed before printhead replacement needed.
• Unlike labelers with delicate near-edge printheads, CrossMerge works great with both thermal transfer and direct thermal labels.
• ID Technology’s lifetime limited warranty if you use our labels.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2020/05/yeahlikethat.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/05/yeahlikethat.jpg

Image exists, checking for same file size

Replacing images : - ON

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

• more output from packaging lines.
• higher efficiency and less downtime.
• best possible barcode quality for GS1 compliance.
• minimize the total cost of ownership.

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMerge

To address some of these issues, ID Technology introduced PowerMerge.

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

• the label is fed with the narrow side across the web – this means that more material has to pass through the printer for each print cycle.
• this orientation gives fewer labels per roll.
• not the ideal orientation for the best barcode quality.

Introducing CrossMerge

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

• Like, PowerMerge, the print speed is disconnect from the application speed, allowing the printer to run at a slower speed than is usual – while still proving higher outputs.
• Lower speed causes less wear (and consequently maintenance requirement) and provides the best print quality.
• Improved ISO/ANSI barcode verification scores.
• Up to twice as many labels per roll (4×2 label compared to conventional wipe-on labeling).
• Up to twice as many labels printed before printhead replacement needed.
• Unlike labelers with delicate near-edge printheads, CrossMerge works great with both thermal transfer and direct thermal labels.
• ID Technology’s lifetime limited warranty if you use our labels.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Local save:http://www.labelingnews.com/wp-content/uploads/2020/05/TampApplicator-1.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/05/TampApplicator-1.jpg

Image exists, checking for same file size

Replacing images : - ON

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

• more output from packaging lines.
• higher efficiency and less downtime.
• best possible barcode quality for GS1 compliance.
• minimize the total cost of ownership.

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMerge

To address some of these issues, ID Technology introduced PowerMerge.

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

• the label is fed with the narrow side across the web – this means that more material has to pass through the printer for each print cycle.
• this orientation gives fewer labels per roll.
• not the ideal orientation for the best barcode quality.

Introducing CrossMerge

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

• Like, PowerMerge, the print speed is disconnect from the application speed, allowing the printer to run at a slower speed than is usual – while still proving higher outputs.
• Lower speed causes less wear (and consequently maintenance requirement) and provides the best print quality.
• Improved ISO/ANSI barcode verification scores.
• Up to twice as many labels per roll (4×2 label compared to conventional wipe-on labeling).
• Up to twice as many labels printed before printhead replacement needed.
• Unlike labelers with delicate near-edge printheads, CrossMerge works great with both thermal transfer and direct thermal labels.
• ID Technology’s lifetime limited warranty if you use our labels.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Local save:https://s.w.org/images/core/emoji/13.0.0/72x72/2122.png

Image process :: Saving local image

grab remote location : https://s.w.org/images/core/emoji/13.0.0/72x72/2122.png

Image exists, checking for same file size

Replacing images : - ON

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

• more output from packaging lines.
• higher efficiency and less downtime.
• best possible barcode quality for GS1 compliance.
• minimize the total cost of ownership.

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMerge

To address some of these issues, ID Technology introduced PowerMerge.

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

• the label is fed with the narrow side across the web – this means that more material has to pass through the printer for each print cycle.
• this orientation gives fewer labels per roll.
• not the ideal orientation for the best barcode quality.

Introducing CrossMerge

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

• Like, PowerMerge, the print speed is disconnect from the application speed, allowing the printer to run at a slower speed than is usual – while still proving higher outputs.
• Lower speed causes less wear (and consequently maintenance requirement) and provides the best print quality.
• Improved ISO/ANSI barcode verification scores.
• Up to twice as many labels per roll (4×2 label compared to conventional wipe-on labeling).
• Up to twice as many labels printed before printhead replacement needed.
• Unlike labelers with delicate near-edge printheads, CrossMerge works great with both thermal transfer and direct thermal labels.
• ID Technology’s lifetime limited warranty if you use our labels.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Local save:http://www.labelingnews.com/wp-content/uploads/2020/05/PowerMergeLN.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/05/PowerMergeLN.jpg

Image exists, checking for same file size

Replacing images : - ON

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

• more output from packaging lines.
• higher efficiency and less downtime.
• best possible barcode quality for GS1 compliance.
• minimize the total cost of ownership.

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMerge

To address some of these issues, ID Technology introduced PowerMerge.

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

• the label is fed with the narrow side across the web – this means that more material has to pass through the printer for each print cycle.
• this orientation gives fewer labels per roll.
• not the ideal orientation for the best barcode quality.

Introducing CrossMerge

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

• Like, PowerMerge, the print speed is disconnect from the application speed, allowing the printer to run at a slower speed than is usual – while still proving higher outputs.
• Lower speed causes less wear (and consequently maintenance requirement) and provides the best print quality.
• Improved ISO/ANSI barcode verification scores.
• Up to twice as many labels per roll (4×2 label compared to conventional wipe-on labeling).
• Up to twice as many labels printed before printhead replacement needed.
• Unlike labelers with delicate near-edge printheads, CrossMerge works great with both thermal transfer and direct thermal labels.
• ID Technology’s lifetime limited warranty if you use our labels.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Local save:https://s.w.org/images/core/emoji/13.0.0/72x72/2122.png

Image process :: Saving local image

grab remote location : https://s.w.org/images/core/emoji/13.0.0/72x72/2122.png

Image exists, checking for same file size

Replacing images : - ON

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

• more output from packaging lines.
• higher efficiency and less downtime.
• best possible barcode quality for GS1 compliance.
• minimize the total cost of ownership.

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMerge

To address some of these issues, ID Technology introduced PowerMerge.

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

• the label is fed with the narrow side across the web – this means that more material has to pass through the printer for each print cycle.
• this orientation gives fewer labels per roll.
• not the ideal orientation for the best barcode quality.

Introducing CrossMerge

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

• Like, PowerMerge, the print speed is disconnect from the application speed, allowing the printer to run at a slower speed than is usual – while still proving higher outputs.
• Lower speed causes less wear (and consequently maintenance requirement) and provides the best print quality.
• Improved ISO/ANSI barcode verification scores.
• Up to twice as many labels per roll (4×2 label compared to conventional wipe-on labeling).
• Up to twice as many labels printed before printhead replacement needed.
• Unlike labelers with delicate near-edge printheads, CrossMerge works great with both thermal transfer and direct thermal labels.
• ID Technology’s lifetime limited warranty if you use our labels.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Local save:http://www.labelingnews.com/wp-content/uploads/2020/05/CM-LN.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/05/CM-LN.jpg

Image exists, checking for same file size

Replacing images : - ON

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

• more output from packaging lines.
• higher efficiency and less downtime.
• best possible barcode quality for GS1 compliance.
• minimize the total cost of ownership.

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMerge

To address some of these issues, ID Technology introduced PowerMerge.

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

• the label is fed with the narrow side across the web – this means that more material has to pass through the printer for each print cycle.
• this orientation gives fewer labels per roll.
• not the ideal orientation for the best barcode quality.

Introducing CrossMerge

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

• Like, PowerMerge, the print speed is disconnect from the application speed, allowing the printer to run at a slower speed than is usual – while still proving higher outputs.
• Lower speed causes less wear (and consequently maintenance requirement) and provides the best print quality.
• Improved ISO/ANSI barcode verification scores.
• Up to twice as many labels per roll (4×2 label compared to conventional wipe-on labeling).
• Up to twice as many labels printed before printhead replacement needed.
• Unlike labelers with delicate near-edge printheads, CrossMerge works great with both thermal transfer and direct thermal labels.
• ID Technology’s lifetime limited warranty if you use our labels.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Local save:http://www.labelingnews.com/wp-content/uploads/2020/05/CrossMerge-concept.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/05/CrossMerge-concept.jpg

Image exists, checking for same file size

Replacing images : - ON

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

• more output from packaging lines.
• higher efficiency and less downtime.
• best possible barcode quality for GS1 compliance.
• minimize the total cost of ownership.

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMerge

To address some of these issues, ID Technology introduced PowerMerge.

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

• the label is fed with the narrow side across the web – this means that more material has to pass through the printer for each print cycle.
• this orientation gives fewer labels per roll.
• not the ideal orientation for the best barcode quality.

Introducing CrossMerge

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

• Like, PowerMerge, the print speed is disconnect from the application speed, allowing the printer to run at a slower speed than is usual – while still proving higher outputs.
• Lower speed causes less wear (and consequently maintenance requirement) and provides the best print quality.
• Improved ISO/ANSI barcode verification scores.
• Up to twice as many labels per roll (4×2 label compared to conventional wipe-on labeling).
• Up to twice as many labels printed before printhead replacement needed.
• Unlike labelers with delicate near-edge printheads, CrossMerge works great with both thermal transfer and direct thermal labels.
• ID Technology’s lifetime limited warranty if you use our labels.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2020/05/the-evolution-of-print-apply-labeling/ [syndication_item_hash] => 682625d3efb96b0a8258844bc4987148 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :The Evolution of Print – Apply Labeling

Array ( [post_title] => The Evolution of Print – Apply Labeling [post_content] =>

Print and Apply – Finally as Simple as it Sounds. 

Many of our customers are faced with the same demands when it comes to labeling their secondary packaging:

• more output from packaging lines.
• higher efficiency and less downtime.
• best possible barcode quality for GS1 compliance.
• minimize the total cost of ownership.

Traditionally, labels would be applied to the side of a shipping case or tray, using a pneumatic or servo driven tamp arrangement. This method has provided excellent service over the years and it is still the most common process in use today.

Using a tamp applicator, while being simple and reliable, does have some drawbacks, though.

The label can only be printed while the tamp pad is in its home position. This means that there are parts of the application cycle where the printer is forced to be idle – reducing the maximum output of the labeler.

These systems usually need plant compressed air to operate them. With many of our customers looking to reduce their overall plant air usage, this is not ideal.

There can also be safety considerations with reciprocating parts operating at high speeds – it is difficult to ensure there are no pinch points.

PowerMerge

To address some of these issues, ID Technology introduced PowerMerge.

Rather than using a tamp system to deliver the label to the product, as the label leaves the print engine, it travels on a driven belt where it is controlled by a flow of air (from a fan, not plant air) to the product.

PowerMerge provides some great advantages:

Once a label is printed and on the belt, the next label can start its own print process. This virtually eliminates and seat time in the print-apply, increasing output considerably.

Gaining time in the sequence also means that the printer can run at lower print speeds, even while maintaining high outputs. This provides better print quality and longer life of printer components.

However, while PowerMerge is often a big step forward compared to tamp applicators, it does have a couple of drawbacks.

• the label is fed with the narrow side across the web – this means that more material has to pass through the printer for each print cycle.
• this orientation gives fewer labels per roll.
• not the ideal orientation for the best barcode quality.

Introducing CrossMerge

CrossMerge brings our PowerMerge concept to another level.

Labels feed from the printer ib the most efficient orientation and then change direction to allow them to be wiped onto the product.

For our customers, there are some huge advantages of CrossMerge.

• Like, PowerMerge, the print speed is disconnect from the application speed, allowing the printer to run at a slower speed than is usual – while still proving higher outputs.
• Lower speed causes less wear (and consequently maintenance requirement) and provides the best print quality.
• Improved ISO/ANSI barcode verification scores.
• Up to twice as many labels per roll (4×2 label compared to conventional wipe-on labeling).
• Up to twice as many labels printed before printhead replacement needed.
• Unlike labelers with delicate near-edge printheads, CrossMerge works great with both thermal transfer and direct thermal labels.
• ID Technology’s lifetime limited warranty if you use our labels.

One of the (many) cool things about CrossMerge is that it can be installed on most existing ID Technology 252 or 255 labeling systems – make the most of your current investment.

Want to learn more? Contact me at david.holliday@ProMachBuilt.com or visit www.idtechnology.com

FAF deciding on filters on post to be syndicated:

The Art of Barcode Shaving

Array ( [post_title] => The Art of Barcode Shaving [post_content] =>

Okay, I’m not suggesting that your barcodes are looking a little scraggly and in need of getting their chins cleaned up. Barcode shaving (also often referred to as pixel shaving) is a way of tweaking your barcodes to get the best, verified print quality.

In this article I want to dig a little into this process and how it relates to printing two-dimensional barcodes when using inkjet printers.

When producing 2D barcodes such as DataMatrix or QR code to GS1 standards, it is obviously important that the data is correct, the structure of the encoded data is correct and the quality of the printed code meets the quality standard.

Typical GS1 DataMatrix Code

Getting the data correct is really the job of the organization that’s printing the barcode, after all, it is their data.

The structure of a GS1 barcode is defined in the GS1 general specification. It’s relatively easy to check that the structure of the data is correct in some cases using a simple smartphone application – I’ve discussed this several times elsewhere.

In the GS1 system, quality for 2D barcodes, such as data matrix and QR codes, is defined in the ISO/IEC 15416 standard.

To verify the quality of a barcode against the standard, a number of measurements are taken using a calibrated verifier. All of these measurements each produce an individual grade which is then combined into one single overall score.

One of these parameters is called print growth. This measures the size of the elements in the barcode and ensures they haven’t crept above the size they should be.

With a 2D DataMatrix barcode, as an example, each of the little squares that makes up the symbol should be exactly the same size, both the dark and light squares.

Look at these two examples:

One of them looks to be printed nice and darkly you – would think that it will be easy for a scanner to read and that its verification score will be good.

In the other example, the barcode looks somewhat lighter. Intuition tells us, that this one would be more difficult to read in the dark version and possibly would score less high in the verification

As it happens, both barcodes are easy to read with most barcode scanners – I can read them just fine with the Barcode Check app on my phone.

However, if you look more closely at the darker example, you’ll see that the darker squares are somewhat larger than the white ones – this is print growth.

What is Print Growth?

When printing with an inkjet printer, the image is produced of a number of very small individual drops of ink. The examples I’ve used were printed on our ClearMark Thermal Inkjet printer, set at 300 dots per inch in both the horizontal and vertical axis. Since the barcode is 0.5″ square, each size is 150 drops or pixels and the individual small squares that make up the barcode are 7 x 7 pixels.

As the drops of ink are sprayed onto the product, they dry quickly (assuming the ink is compatible with the substrate), but not instantly. There is often some time for the drops to spread a little before they set permanently, causing the elements on the image to be slightly larger than intended.

This is why when inspecting a DataMatrix or QR Code that has been printed using inkjet, the small squares that are printed are often too large as the ink spreads.

This is print growth – you can see in the darker example, that the black squares are infringing on the white ones – causing the white squares to be smaller, or even rectangular, rather than squares.

Print growth will downgrade the ISO score of your barcode – possibly to the extent that it fails verification.

So What’s The Solution?

In these situations, Barcode (or Pixel) Shaving is your friend.

With each of the small squares in my example barcode, our ID Technology and Code Tech TIJ printers (and our Greydon Genesis inkjet printers), allow pixels to be removed (shaved) from around each square. So I could make the elements of my barcode 6 x 6 pixels (instead of 7 x 7), but still centered in the same location. This allows the ink to spread a little in each barcode element, but still stay within its assigned overall area.

Using barcode shaving on our printers allows them to be fine-tuned to ensure the best verification scores for both DataMatrix and QR Codes. This is huge for customers who need to comply with GS1 standards, such as those in the medical of pharma industries.

Is it easy to set up?

Yes, this is easy to use on both our Code Tech and ClearMark printers.

Here is the setting screen on ClearMark. You simply set the amount of shaving as a percentage. There is a little trial and error involved, but the setting is saved with the message to remember for next time.

So Shaving is Good?

Yes – this feature can be the difference between passing or failing barcode verification. It is often well worth the time to spend a few minutes fine-tuning your barcode settings, to avoid potential problems in the future.

Want to Learn More?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2020/04/barcode-shaving-300x300.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/04/barcode-shaving-300x300.jpg

Image exists, checking for same file size

Replacing images : - ON

Okay, I’m not suggesting that your barcodes are looking a little scraggly and in need of getting their chins cleaned up. Barcode shaving (also often referred to as pixel shaving) is a way of tweaking your barcodes to get the best, verified print quality.

In this article I want to dig a little into this process and how it relates to printing two-dimensional barcodes when using inkjet printers.

When producing 2D barcodes such as DataMatrix or QR code to GS1 standards, it is obviously important that the data is correct, the structure of the encoded data is correct and the quality of the printed code meets the quality standard.

Typical GS1 DataMatrix Code

Getting the data correct is really the job of the organization that’s printing the barcode, after all, it is their data.

The structure of a GS1 barcode is defined in the GS1 general specification. It’s relatively easy to check that the structure of the data is correct in some cases using a simple smartphone application – I’ve discussed this several times elsewhere.

In the GS1 system, quality for 2D barcodes, such as data matrix and QR codes, is defined in the ISO/IEC 15416 standard.

To verify the quality of a barcode against the standard, a number of measurements are taken using a calibrated verifier. All of these measurements each produce an individual grade which is then combined into one single overall score.

One of these parameters is called print growth. This measures the size of the elements in the barcode and ensures they haven’t crept above the size they should be.

With a 2D DataMatrix barcode, as an example, each of the little squares that makes up the symbol should be exactly the same size, both the dark and light squares.

Look at these two examples:

One of them looks to be printed nice and darkly you – would think that it will be easy for a scanner to read and that its verification score will be good.

In the other example, the barcode looks somewhat lighter. Intuition tells us, that this one would be more difficult to read in the dark version and possibly would score less high in the verification

As it happens, both barcodes are easy to read with most barcode scanners – I can read them just fine with the Barcode Check app on my phone.

However, if you look more closely at the darker example, you’ll see that the darker squares are somewhat larger than the white ones – this is print growth.

What is Print Growth?

When printing with an inkjet printer, the image is produced of a number of very small individual drops of ink. The examples I’ve used were printed on our ClearMark Thermal Inkjet printer, set at 300 dots per inch in both the horizontal and vertical axis. Since the barcode is 0.5″ square, each size is 150 drops or pixels and the individual small squares that make up the barcode are 7 x 7 pixels.

As the drops of ink are sprayed onto the product, they dry quickly (assuming the ink is compatible with the substrate), but not instantly. There is often some time for the drops to spread a little before they set permanently, causing the elements on the image to be slightly larger than intended.

This is why when inspecting a DataMatrix or QR Code that has been printed using inkjet, the small squares that are printed are often too large as the ink spreads.

This is print growth – you can see in the darker example, that the black squares are infringing on the white ones – causing the white squares to be smaller, or even rectangular, rather than squares.

Print growth will downgrade the ISO score of your barcode – possibly to the extent that it fails verification.

So What’s The Solution?

In these situations, Barcode (or Pixel) Shaving is your friend.

With each of the small squares in my example barcode, our ID Technology and Code Tech TIJ printers (and our Greydon Genesis inkjet printers), allow pixels to be removed (shaved) from around each square. So I could make the elements of my barcode 6 x 6 pixels (instead of 7 x 7), but still centered in the same location. This allows the ink to spread a little in each barcode element, but still stay within its assigned overall area.

Using barcode shaving on our printers allows them to be fine-tuned to ensure the best verification scores for both DataMatrix and QR Codes. This is huge for customers who need to comply with GS1 standards, such as those in the medical of pharma industries.

Is it easy to set up?

Yes, this is easy to use on both our Code Tech and ClearMark printers.

Here is the setting screen on ClearMark. You simply set the amount of shaving as a percentage. There is a little trial and error involved, but the setting is saved with the message to remember for next time.

So Shaving is Good?

Yes – this feature can be the difference between passing or failing barcode verification. It is often well worth the time to spend a few minutes fine-tuning your barcode settings, to avoid potential problems in the future.

Want to Learn More?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

Local save:http://www.labelingnews.com/wp-content/uploads/2020/04/Typical-GS1.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/04/Typical-GS1.jpg

Image exists, checking for same file size

Replacing images : - ON

Okay, I’m not suggesting that your barcodes are looking a little scraggly and in need of getting their chins cleaned up. Barcode shaving (also often referred to as pixel shaving) is a way of tweaking your barcodes to get the best, verified print quality.

In this article I want to dig a little into this process and how it relates to printing two-dimensional barcodes when using inkjet printers.

When producing 2D barcodes such as DataMatrix or QR code to GS1 standards, it is obviously important that the data is correct, the structure of the encoded data is correct and the quality of the printed code meets the quality standard.

Typical GS1 DataMatrix Code

Getting the data correct is really the job of the organization that’s printing the barcode, after all, it is their data.

The structure of a GS1 barcode is defined in the GS1 general specification. It’s relatively easy to check that the structure of the data is correct in some cases using a simple smartphone application – I’ve discussed this several times elsewhere.

In the GS1 system, quality for 2D barcodes, such as data matrix and QR codes, is defined in the ISO/IEC 15416 standard.

To verify the quality of a barcode against the standard, a number of measurements are taken using a calibrated verifier. All of these measurements each produce an individual grade which is then combined into one single overall score.

One of these parameters is called print growth. This measures the size of the elements in the barcode and ensures they haven’t crept above the size they should be.

With a 2D DataMatrix barcode, as an example, each of the little squares that makes up the symbol should be exactly the same size, both the dark and light squares.

Look at these two examples:

One of them looks to be printed nice and darkly you – would think that it will be easy for a scanner to read and that its verification score will be good.

In the other example, the barcode looks somewhat lighter. Intuition tells us, that this one would be more difficult to read in the dark version and possibly would score less high in the verification

As it happens, both barcodes are easy to read with most barcode scanners – I can read them just fine with the Barcode Check app on my phone.

However, if you look more closely at the darker example, you’ll see that the darker squares are somewhat larger than the white ones – this is print growth.

What is Print Growth?

When printing with an inkjet printer, the image is produced of a number of very small individual drops of ink. The examples I’ve used were printed on our ClearMark Thermal Inkjet printer, set at 300 dots per inch in both the horizontal and vertical axis. Since the barcode is 0.5″ square, each size is 150 drops or pixels and the individual small squares that make up the barcode are 7 x 7 pixels.

As the drops of ink are sprayed onto the product, they dry quickly (assuming the ink is compatible with the substrate), but not instantly. There is often some time for the drops to spread a little before they set permanently, causing the elements on the image to be slightly larger than intended.

This is why when inspecting a DataMatrix or QR Code that has been printed using inkjet, the small squares that are printed are often too large as the ink spreads.

This is print growth – you can see in the darker example, that the black squares are infringing on the white ones – causing the white squares to be smaller, or even rectangular, rather than squares.

Print growth will downgrade the ISO score of your barcode – possibly to the extent that it fails verification.

So What’s The Solution?

In these situations, Barcode (or Pixel) Shaving is your friend.

With each of the small squares in my example barcode, our ID Technology and Code Tech TIJ printers (and our Greydon Genesis inkjet printers), allow pixels to be removed (shaved) from around each square. So I could make the elements of my barcode 6 x 6 pixels (instead of 7 x 7), but still centered in the same location. This allows the ink to spread a little in each barcode element, but still stay within its assigned overall area.

Using barcode shaving on our printers allows them to be fine-tuned to ensure the best verification scores for both DataMatrix and QR Codes. This is huge for customers who need to comply with GS1 standards, such as those in the medical of pharma industries.

Is it easy to set up?

Yes, this is easy to use on both our Code Tech and ClearMark printers.

Here is the setting screen on ClearMark. You simply set the amount of shaving as a percentage. There is a little trial and error involved, but the setting is saved with the message to remember for next time.

So Shaving is Good?

Yes – this feature can be the difference between passing or failing barcode verification. It is often well worth the time to spend a few minutes fine-tuning your barcode settings, to avoid potential problems in the future.

Want to Learn More?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

Local save:http://www.labelingnews.com/wp-content/uploads/2020/04/WhichBarcode.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/04/WhichBarcode.jpg

Image exists, checking for same file size

Replacing images : - ON

Okay, I’m not suggesting that your barcodes are looking a little scraggly and in need of getting their chins cleaned up. Barcode shaving (also often referred to as pixel shaving) is a way of tweaking your barcodes to get the best, verified print quality.

In this article I want to dig a little into this process and how it relates to printing two-dimensional barcodes when using inkjet printers.

When producing 2D barcodes such as DataMatrix or QR code to GS1 standards, it is obviously important that the data is correct, the structure of the encoded data is correct and the quality of the printed code meets the quality standard.

Typical GS1 DataMatrix Code

Getting the data correct is really the job of the organization that’s printing the barcode, after all, it is their data.

The structure of a GS1 barcode is defined in the GS1 general specification. It’s relatively easy to check that the structure of the data is correct in some cases using a simple smartphone application – I’ve discussed this several times elsewhere.

In the GS1 system, quality for 2D barcodes, such as data matrix and QR codes, is defined in the ISO/IEC 15416 standard.

To verify the quality of a barcode against the standard, a number of measurements are taken using a calibrated verifier. All of these measurements each produce an individual grade which is then combined into one single overall score.

One of these parameters is called print growth. This measures the size of the elements in the barcode and ensures they haven’t crept above the size they should be.

With a 2D DataMatrix barcode, as an example, each of the little squares that makes up the symbol should be exactly the same size, both the dark and light squares.

Look at these two examples:

One of them looks to be printed nice and darkly you – would think that it will be easy for a scanner to read and that its verification score will be good.

In the other example, the barcode looks somewhat lighter. Intuition tells us, that this one would be more difficult to read in the dark version and possibly would score less high in the verification

As it happens, both barcodes are easy to read with most barcode scanners – I can read them just fine with the Barcode Check app on my phone.

However, if you look more closely at the darker example, you’ll see that the darker squares are somewhat larger than the white ones – this is print growth.

What is Print Growth?

When printing with an inkjet printer, the image is produced of a number of very small individual drops of ink. The examples I’ve used were printed on our ClearMark Thermal Inkjet printer, set at 300 dots per inch in both the horizontal and vertical axis. Since the barcode is 0.5″ square, each size is 150 drops or pixels and the individual small squares that make up the barcode are 7 x 7 pixels.

As the drops of ink are sprayed onto the product, they dry quickly (assuming the ink is compatible with the substrate), but not instantly. There is often some time for the drops to spread a little before they set permanently, causing the elements on the image to be slightly larger than intended.

This is why when inspecting a DataMatrix or QR Code that has been printed using inkjet, the small squares that are printed are often too large as the ink spreads.

This is print growth – you can see in the darker example, that the black squares are infringing on the white ones – causing the white squares to be smaller, or even rectangular, rather than squares.

Print growth will downgrade the ISO score of your barcode – possibly to the extent that it fails verification.

So What’s The Solution?

In these situations, Barcode (or Pixel) Shaving is your friend.

With each of the small squares in my example barcode, our ID Technology and Code Tech TIJ printers (and our Greydon Genesis inkjet printers), allow pixels to be removed (shaved) from around each square. So I could make the elements of my barcode 6 x 6 pixels (instead of 7 x 7), but still centered in the same location. This allows the ink to spread a little in each barcode element, but still stay within its assigned overall area.

Using barcode shaving on our printers allows them to be fine-tuned to ensure the best verification scores for both DataMatrix and QR Codes. This is huge for customers who need to comply with GS1 standards, such as those in the medical of pharma industries.

Is it easy to set up?

Yes, this is easy to use on both our Code Tech and ClearMark printers.

Here is the setting screen on ClearMark. You simply set the amount of shaving as a percentage. There is a little trial and error involved, but the setting is saved with the message to remember for next time.

So Shaving is Good?

Yes – this feature can be the difference between passing or failing barcode verification. It is often well worth the time to spend a few minutes fine-tuning your barcode settings, to avoid potential problems in the future.

Want to Learn More?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

Local save:http://www.labelingnews.com/wp-content/uploads/2020/04/clearmark-shaving.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2020/04/clearmark-shaving.jpg

Image exists, checking for same file size

Replacing images : - ON

Okay, I’m not suggesting that your barcodes are looking a little scraggly and in need of getting their chins cleaned up. Barcode shaving (also often referred to as pixel shaving) is a way of tweaking your barcodes to get the best, verified print quality.

In this article I want to dig a little into this process and how it relates to printing two-dimensional barcodes when using inkjet printers.

When producing 2D barcodes such as DataMatrix or QR code to GS1 standards, it is obviously important that the data is correct, the structure of the encoded data is correct and the quality of the printed code meets the quality standard.

Typical GS1 DataMatrix Code

Getting the data correct is really the job of the organization that’s printing the barcode, after all, it is their data.

The structure of a GS1 barcode is defined in the GS1 general specification. It’s relatively easy to check that the structure of the data is correct in some cases using a simple smartphone application – I’ve discussed this several times elsewhere.

In the GS1 system, quality for 2D barcodes, such as data matrix and QR codes, is defined in the ISO/IEC 15416 standard.

To verify the quality of a barcode against the standard, a number of measurements are taken using a calibrated verifier. All of these measurements each produce an individual grade which is then combined into one single overall score.

One of these parameters is called print growth. This measures the size of the elements in the barcode and ensures they haven’t crept above the size they should be.

With a 2D DataMatrix barcode, as an example, each of the little squares that makes up the symbol should be exactly the same size, both the dark and light squares.

Look at these two examples:

One of them looks to be printed nice and darkly you – would think that it will be easy for a scanner to read and that its verification score will be good.

In the other example, the barcode looks somewhat lighter. Intuition tells us, that this one would be more difficult to read in the dark version and possibly would score less high in the verification

As it happens, both barcodes are easy to read with most barcode scanners – I can read them just fine with the Barcode Check app on my phone.

However, if you look more closely at the darker example, you’ll see that the darker squares are somewhat larger than the white ones – this is print growth.

What is Print Growth?

When printing with an inkjet printer, the image is produced of a number of very small individual drops of ink. The examples I’ve used were printed on our ClearMark Thermal Inkjet printer, set at 300 dots per inch in both the horizontal and vertical axis. Since the barcode is 0.5″ square, each size is 150 drops or pixels and the individual small squares that make up the barcode are 7 x 7 pixels.

As the drops of ink are sprayed onto the product, they dry quickly (assuming the ink is compatible with the substrate), but not instantly. There is often some time for the drops to spread a little before they set permanently, causing the elements on the image to be slightly larger than intended.

This is why when inspecting a DataMatrix or QR Code that has been printed using inkjet, the small squares that are printed are often too large as the ink spreads.

This is print growth – you can see in the darker example, that the black squares are infringing on the white ones – causing the white squares to be smaller, or even rectangular, rather than squares.

Print growth will downgrade the ISO score of your barcode – possibly to the extent that it fails verification.

So What’s The Solution?

In these situations, Barcode (or Pixel) Shaving is your friend.

With each of the small squares in my example barcode, our ID Technology and Code Tech TIJ printers (and our Greydon Genesis inkjet printers), allow pixels to be removed (shaved) from around each square. So I could make the elements of my barcode 6 x 6 pixels (instead of 7 x 7), but still centered in the same location. This allows the ink to spread a little in each barcode element, but still stay within its assigned overall area.

Using barcode shaving on our printers allows them to be fine-tuned to ensure the best verification scores for both DataMatrix and QR Codes. This is huge for customers who need to comply with GS1 standards, such as those in the medical of pharma industries.

Is it easy to set up?

Yes, this is easy to use on both our Code Tech and ClearMark printers.

Here is the setting screen on ClearMark. You simply set the amount of shaving as a percentage. There is a little trial and error involved, but the setting is saved with the message to remember for next time.

So Shaving is Good?

Yes – this feature can be the difference between passing or failing barcode verification. It is often well worth the time to spend a few minutes fine-tuning your barcode settings, to avoid potential problems in the future.

Want to Learn More?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2020/04/barcodeshaving/ [syndication_item_hash] => 805a431cc5d01a0770efae352dd604b4 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :The Art of Barcode Shaving

Array ( [post_title] => The Art of Barcode Shaving [post_content] =>

Okay, I’m not suggesting that your barcodes are looking a little scraggly and in need of getting their chins cleaned up. Barcode shaving (also often referred to as pixel shaving) is a way of tweaking your barcodes to get the best, verified print quality.

In this article I want to dig a little into this process and how it relates to printing two-dimensional barcodes when using inkjet printers.

When producing 2D barcodes such as DataMatrix or QR code to GS1 standards, it is obviously important that the data is correct, the structure of the encoded data is correct and the quality of the printed code meets the quality standard.

Typical GS1 DataMatrix Code

Getting the data correct is really the job of the organization that’s printing the barcode, after all, it is their data.

The structure of a GS1 barcode is defined in the GS1 general specification. It’s relatively easy to check that the structure of the data is correct in some cases using a simple smartphone application – I’ve discussed this several times elsewhere.

In the GS1 system, quality for 2D barcodes, such as data matrix and QR codes, is defined in the ISO/IEC 15416 standard.

To verify the quality of a barcode against the standard, a number of measurements are taken using a calibrated verifier. All of these measurements each produce an individual grade which is then combined into one single overall score.

One of these parameters is called print growth. This measures the size of the elements in the barcode and ensures they haven’t crept above the size they should be.

With a 2D DataMatrix barcode, as an example, each of the little squares that makes up the symbol should be exactly the same size, both the dark and light squares.

Look at these two examples:

One of them looks to be printed nice and darkly you – would think that it will be easy for a scanner to read and that its verification score will be good.

In the other example, the barcode looks somewhat lighter. Intuition tells us, that this one would be more difficult to read in the dark version and possibly would score less high in the verification

As it happens, both barcodes are easy to read with most barcode scanners – I can read them just fine with the Barcode Check app on my phone.

However, if you look more closely at the darker example, you’ll see that the darker squares are somewhat larger than the white ones – this is print growth.

What is Print Growth?

When printing with an inkjet printer, the image is produced of a number of very small individual drops of ink. The examples I’ve used were printed on our ClearMark Thermal Inkjet printer, set at 300 dots per inch in both the horizontal and vertical axis. Since the barcode is 0.5″ square, each size is 150 drops or pixels and the individual small squares that make up the barcode are 7 x 7 pixels.

As the drops of ink are sprayed onto the product, they dry quickly (assuming the ink is compatible with the substrate), but not instantly. There is often some time for the drops to spread a little before they set permanently, causing the elements on the image to be slightly larger than intended.

This is why when inspecting a DataMatrix or QR Code that has been printed using inkjet, the small squares that are printed are often too large as the ink spreads.

This is print growth – you can see in the darker example, that the black squares are infringing on the white ones – causing the white squares to be smaller, or even rectangular, rather than squares.

Print growth will downgrade the ISO score of your barcode – possibly to the extent that it fails verification.

So What’s The Solution?

In these situations, Barcode (or Pixel) Shaving is your friend.

With each of the small squares in my example barcode, our ID Technology and Code Tech TIJ printers (and our Greydon Genesis inkjet printers), allow pixels to be removed (shaved) from around each square. So I could make the elements of my barcode 6 x 6 pixels (instead of 7 x 7), but still centered in the same location. This allows the ink to spread a little in each barcode element, but still stay within its assigned overall area.

Using barcode shaving on our printers allows them to be fine-tuned to ensure the best verification scores for both DataMatrix and QR Codes. This is huge for customers who need to comply with GS1 standards, such as those in the medical of pharma industries.

Is it easy to set up?

Yes, this is easy to use on both our Code Tech and ClearMark printers.

Here is the setting screen on ClearMark. You simply set the amount of shaving as a percentage. There is a little trial and error involved, but the setting is saved with the message to remember for next time.

So Shaving is Good?

Yes – this feature can be the difference between passing or failing barcode verification. It is often well worth the time to spend a few minutes fine-tuning your barcode settings, to avoid potential problems in the future.

Want to Learn More?

How can you start improving your own packaging coding? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com We’ll get you in touch with one of our local experts right away.

FAF deciding on filters on post to be syndicated:

Manage Your New Nutrition Labels

Array ( [post_title] => Manage Your New Nutrition Labels [post_content] =>

The new style, FDA approved, nutritional facts labels take effect next month.

The agency has stated that due to many companies int the food industry not being ready, enforcement will be delayed for six months, but this is still a good time to ensure you have a plan to be in compliance.

One of the reasons stated for the delay is that many food producers have a large number of existing printed labels in stock that need to be used up, and many have not finished the process of procuring labels to the new design.

One way to help with this problem (and to make managing many SKUs of nutrition labels much easier) is to invest in ID Technology’s labeling system, with optional print/apply head to print the nutrition information right on the label applicator at the time of use.

The 262 print/apply labeling head can be used as the bottom head on a top/bottom labeler or as a bottom only labeler in order to produce the completed printed nutrition label.

On a top/bottom set-up, this allows for the existing nicely printed digital or flexo label to be applied to the top of the package and the complete bottom label with allergen, ingredients and nutritional information be printed on the bottom label.

We recommend using NiceLabel label management to provide full control of the label designs and ensure that only the correct, approved label is printed every time.

Using this system can eliminate the need to source and manage multiple pre-printed label SKUs and prevent being left with inventories of obsolete labels when the copy on the label changes.

In addition, the 262 labeling head can also apply conventional printed labels, allowing our customers to use pre-printed labels for large volume products and the print/apply feature for smaller runs.

Our labeling systems are built in the USA and are designed to be easy to set-up, use and maintain.

How can ID Technology help you meet your objectives for your labeling operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2019/12/digitalize-labeling-262b.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/12/digitalize-labeling-262b.jpg

Image exists, checking for same file size

Replacing images : - ON

The new style, FDA approved, nutritional facts labels take effect next month.

The agency has stated that due to many companies int the food industry not being ready, enforcement will be delayed for six months, but this is still a good time to ensure you have a plan to be in compliance.

One of the reasons stated for the delay is that many food producers have a large number of existing printed labels in stock that need to be used up, and many have not finished the process of procuring labels to the new design.

One way to help with this problem (and to make managing many SKUs of nutrition labels much easier) is to invest in ID Technology’s labeling system, with optional print/apply head to print the nutrition information right on the label applicator at the time of use.

The 262 print/apply labeling head can be used as the bottom head on a top/bottom labeler or as a bottom only labeler in order to produce the completed printed nutrition label.

On a top/bottom set-up, this allows for the existing nicely printed digital or flexo label to be applied to the top of the package and the complete bottom label with allergen, ingredients and nutritional information be printed on the bottom label.

We recommend using NiceLabel label management to provide full control of the label designs and ensure that only the correct, approved label is printed every time.

Using this system can eliminate the need to source and manage multiple pre-printed label SKUs and prevent being left with inventories of obsolete labels when the copy on the label changes.

In addition, the 262 labeling head can also apply conventional printed labels, allowing our customers to use pre-printed labels for large volume products and the print/apply feature for smaller runs.

Our labeling systems are built in the USA and are designed to be easy to set-up, use and maintain.

How can ID Technology help you meet your objectives for your labeling operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/12/manage-your-new-nutrition-labels/ [syndication_item_hash] => 944e39b5cb038862bc2a7317ff6d88a6 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Manage Your New Nutrition Labels

Array ( [post_title] => Manage Your New Nutrition Labels [post_content] =>

The new style, FDA approved, nutritional facts labels take effect next month.

The agency has stated that due to many companies int the food industry not being ready, enforcement will be delayed for six months, but this is still a good time to ensure you have a plan to be in compliance.

One of the reasons stated for the delay is that many food producers have a large number of existing printed labels in stock that need to be used up, and many have not finished the process of procuring labels to the new design.

One way to help with this problem (and to make managing many SKUs of nutrition labels much easier) is to invest in ID Technology’s labeling system, with optional print/apply head to print the nutrition information right on the label applicator at the time of use.

The 262 print/apply labeling head can be used as the bottom head on a top/bottom labeler or as a bottom only labeler in order to produce the completed printed nutrition label.

On a top/bottom set-up, this allows for the existing nicely printed digital or flexo label to be applied to the top of the package and the complete bottom label with allergen, ingredients and nutritional information be printed on the bottom label.

We recommend using NiceLabel label management to provide full control of the label designs and ensure that only the correct, approved label is printed every time.

Using this system can eliminate the need to source and manage multiple pre-printed label SKUs and prevent being left with inventories of obsolete labels when the copy on the label changes.

In addition, the 262 labeling head can also apply conventional printed labels, allowing our customers to use pre-printed labels for large volume products and the print/apply feature for smaller runs.

Our labeling systems are built in the USA and are designed to be easy to set-up, use and maintain.

How can ID Technology help you meet your objectives for your labeling operations? Contact us today at 888-438-3242 Option#3. You can also email me at dholliday@idtechnology.com. We’ll be sure to get you in touch with an expert, right in your area!

FAF deciding on filters on post to be syndicated:

Canadian Printing Awards – Congratulations Jet Label!

Array ( [post_title] => Canadian Printing Awards – Congratulations Jet Label! [post_content] =>

The Canadian Printing Awards is an annual event, currently in its 14th year, that celebrates the excellence and innovation of the printing industry in Canada.

The awards cover a wide range of print and printing-related categories, Industry Achievement, Print Design, Printing, Technology and Environmental.

The 2019 awards were presented at a gala event in Toronto and a total of 113 gold, silver and bronze awards were presented.

We are thrilled that the newest member of our ProMach Labeling & Coding family, Jet Label swept the awards in the Digital Label category, winning gold, silver and bronze.

This is a fantastic achievement and all three Jet Label submissions would have been worthy of first place. Here is the gold award and the winning label, printed for Dog Island Brewing:

To show just how consistent the Jet Label quality is, this isn’t the first time our colleagues have dominated the Digital Label category at the awards. Here are the gold, silver and bronze winners from 2018 – see a trend here?

Jet Label is Western Canada’s largest supplier of high-quality labels (both digital and flexo) with large investments in equipment and a super team of motivated professionals. A great addition to the ProMach family.

With 7 label converting and printing plants across the United States and Canada, ProMach is your local label company with national reach and support. Combining our labels with ID Technology and EPI labeling equipment is the best way to ensure your products project the right image.

Want to get started improving your labels and labeling? Contact us today at 888-438-3242 Option#3. You can also email me at david.holliday@promachbuilt.com. We’ll be sure to get you in touch with an expert, right in your area!

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:http://www.labelingnews.com/wp-content/uploads/2019/11/2019printawards.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/11/2019printawards.jpg

Image exists, checking for same file size

Replacing images : - ON

The Canadian Printing Awards is an annual event, currently in its 14th year, that celebrates the excellence and innovation of the printing industry in Canada.

The awards cover a wide range of print and printing-related categories, Industry Achievement, Print Design, Printing, Technology and Environmental.

The 2019 awards were presented at a gala event in Toronto and a total of 113 gold, silver and bronze awards were presented.

We are thrilled that the newest member of our ProMach Labeling & Coding family, Jet Label swept the awards in the Digital Label category, winning gold, silver and bronze.

This is a fantastic achievement and all three Jet Label submissions would have been worthy of first place. Here is the gold award and the winning label, printed for Dog Island Brewing:

To show just how consistent the Jet Label quality is, this isn’t the first time our colleagues have dominated the Digital Label category at the awards. Here are the gold, silver and bronze winners from 2018 – see a trend here?

Jet Label is Western Canada’s largest supplier of high-quality labels (both digital and flexo) with large investments in equipment and a super team of motivated professionals. A great addition to the ProMach family.

With 7 label converting and printing plants across the United States and Canada, ProMach is your local label company with national reach and support. Combining our labels with ID Technology and EPI labeling equipment is the best way to ensure your products project the right image.

Want to get started improving your labels and labeling? Contact us today at 888-438-3242 Option#3. You can also email me at david.holliday@promachbuilt.com. We’ll be sure to get you in touch with an expert, right in your area!

Local save:http://www.labelingnews.com/wp-content/uploads/2019/11/canadaawardgold.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/11/canadaawardgold.jpg

Image exists, checking for same file size

Replacing images : - ON

The Canadian Printing Awards is an annual event, currently in its 14th year, that celebrates the excellence and innovation of the printing industry in Canada.

The awards cover a wide range of print and printing-related categories, Industry Achievement, Print Design, Printing, Technology and Environmental.

The 2019 awards were presented at a gala event in Toronto and a total of 113 gold, silver and bronze awards were presented.

We are thrilled that the newest member of our ProMach Labeling & Coding family, Jet Label swept the awards in the Digital Label category, winning gold, silver and bronze.

This is a fantastic achievement and all three Jet Label submissions would have been worthy of first place. Here is the gold award and the winning label, printed for Dog Island Brewing:

To show just how consistent the Jet Label quality is, this isn’t the first time our colleagues have dominated the Digital Label category at the awards. Here are the gold, silver and bronze winners from 2018 – see a trend here?

Jet Label is Western Canada’s largest supplier of high-quality labels (both digital and flexo) with large investments in equipment and a super team of motivated professionals. A great addition to the ProMach family.

With 7 label converting and printing plants across the United States and Canada, ProMach is your local label company with national reach and support. Combining our labels with ID Technology and EPI labeling equipment is the best way to ensure your products project the right image.

Want to get started improving your labels and labeling? Contact us today at 888-438-3242 Option#3. You can also email me at david.holliday@promachbuilt.com. We’ll be sure to get you in touch with an expert, right in your area!

Local save:http://www.labelingnews.com/wp-content/uploads/2019/11/2018canadaawards.jpg

Image process :: Saving local image

grab remote location : http://www.labelingnews.com/wp-content/uploads/2019/11/2018canadaawards.jpg

Image exists, checking for same file size

Replacing images : - ON

The Canadian Printing Awards is an annual event, currently in its 14th year, that celebrates the excellence and innovation of the printing industry in Canada.

The awards cover a wide range of print and printing-related categories, Industry Achievement, Print Design, Printing, Technology and Environmental.

The 2019 awards were presented at a gala event in Toronto and a total of 113 gold, silver and bronze awards were presented.

We are thrilled that the newest member of our ProMach Labeling & Coding family, Jet Label swept the awards in the Digital Label category, winning gold, silver and bronze.

This is a fantastic achievement and all three Jet Label submissions would have been worthy of first place. Here is the gold award and the winning label, printed for Dog Island Brewing:

To show just how consistent the Jet Label quality is, this isn’t the first time our colleagues have dominated the Digital Label category at the awards. Here are the gold, silver and bronze winners from 2018 – see a trend here?

Jet Label is Western Canada’s largest supplier of high-quality labels (both digital and flexo) with large investments in equipment and a super team of motivated professionals. A great addition to the ProMach family.

With 7 label converting and printing plants across the United States and Canada, ProMach is your local label company with national reach and support. Combining our labels with ID Technology and EPI labeling equipment is the best way to ensure your products project the right image.

Want to get started improving your labels and labeling? Contact us today at 888-438-3242 Option#3. You can also email me at david.holliday@promachbuilt.com. We’ll be sure to get you in touch with an expert, right in your area!

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => Labeling News [syndication_source_uri] => http://www.labelingnews.com [syndication_source_id] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed] => http://feeds.feedburner.com/labelingnews/HCzq [syndication_feed_id] => 12 [syndication_permalink] => http://www.labelingnews.com/2019/11/canadian-printing-awards-congratulations-jet-label/ [syndication_item_hash] => 6195e774d151e0477954f79b948470cf )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Canadian Printing Awards – Congratulations Jet Label!

Array ( [post_title] => Canadian Printing Awards – Congratulations Jet Label! [post_content] =>

The Canadian Printing Awards is an annual event, currently in its 14th year, that celebrates the excellence and innovation of the printing industry in Canada.

The awards cover a wide range of print and printing-related categories, Industry Achievement, Print Design, Printing, Technology and Environmental.

The 2019 awards were presented at a gala event in Toronto and a total of 113 gold, silver and bronze awards were presented.

We are thrilled that the newest member of our ProMach Labeling & Coding family, Jet Label swept the awards in the Digital Label category, winning gold, silver and bronze.

This is a fantastic achievement and all three Jet Label submissions would have been worthy of first place. Here is the gold award and the winning label, printed for Dog Island Brewing:

To show just how consistent the Jet Label quality is, this isn’t the first time our colleagues have dominated the Digital Label category at the awards. Here are the gold, silver and bronze winners from 2018 – see a trend here?

Jet Label is Western Canada’s largest supplier of high-quality labels (both digital and flexo) with large investments in equipment and a super team of motivated professionals. A great addition to the ProMach family.

With 7 label converting and printing plants across the United States and Canada, ProMach is your local label company with national reach and support. Combining our labels with ID Technology and EPI labeling equipment is the best way to ensure your products project the right image.

Want to get started improving your labels and labeling? Contact us today at 888-438-3242 Option#3. You can also email me at david.holliday@promachbuilt.com. We’ll be sure to get you in touch with an expert, right in your area!

FAF deciding on filters on post to be syndicated:

Coveris unveils rebranded Amberley Labels

Array ( [post_title] => Coveris unveils rebranded Amberley Labels [post_content] =>

Amberley Labels, Coveris’ decorative labelling business, has today unveiled a luxury, new-look across its two UK sites.

This story continues at Coveris unveils rebranded Amberley Labels

Or just read more coverage at Packaging News

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => News – Packaging News [syndication_source_uri] => https://www.packagingnews.co.uk [syndication_source_id] => http://www.packagingnews.co.uk/category/news/feed/ [rss:comments] => https://www.packagingnews.co.uk/luxury/news-business/coveris-unveils-rebranded-amberley-labels-28-09-2020#respond [wfw:commentRSS] => https://www.packagingnews.co.uk/luxury/news-business/coveris-unveils-rebranded-amberley-labels-28-09-2020/feed [syndication_feed] => http://www.packagingnews.co.uk/category/news/feed/ [syndication_feed_id] => 39 [syndication_permalink] => https://www.packagingnews.co.uk/luxury/news-business/coveris-unveils-rebranded-amberley-labels-28-09-2020 [syndication_item_hash] => 4db14db9e141291c52989dbfa302de76 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Coveris unveils rebranded Amberley Labels

Array ( [post_title] => Coveris unveils rebranded Amberley Labels [post_content] =>

Amberley Labels, Coveris’ decorative labelling business, has today unveiled a luxury, new-look across its two UK sites.

This story continues at Coveris unveils rebranded Amberley Labels

Or just read more coverage at Packaging News

FAF deciding on filters on post to be syndicated:

Viridor and Kent County Council agree £6.2m deal

Array ( [post_title] => Viridor and Kent County Council agree £6.2m deal [post_content] =>

Viridor has secured a new £6.2m dry mixed recycling deal with Kent County Council.

This story continues at Viridor and Kent County Council agree £6.2m deal

Or just read more coverage at Packaging News

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => News – Packaging News [syndication_source_uri] => https://www.packagingnews.co.uk [syndication_source_id] => http://www.packagingnews.co.uk/category/news/feed/ [rss:comments] => https://www.packagingnews.co.uk/news/viridor-kent-county-council-agree-6-2m-deal-28-09-2020#respond [wfw:commentRSS] => https://www.packagingnews.co.uk/news/viridor-kent-county-council-agree-6-2m-deal-28-09-2020/feed [syndication_feed] => http://www.packagingnews.co.uk/category/news/feed/ [syndication_feed_id] => 39 [syndication_permalink] => https://www.packagingnews.co.uk/news/viridor-kent-county-council-agree-6-2m-deal-28-09-2020 [syndication_item_hash] => 6e5f634b9aa8e58b9ae2d7056d3c70f8 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Viridor and Kent County Council agree £6.2m deal

Array ( [post_title] => Viridor and Kent County Council agree £6.2m deal [post_content] =>

Viridor has secured a new £6.2m dry mixed recycling deal with Kent County Council.

This story continues at Viridor and Kent County Council agree £6.2m deal

Or just read more coverage at Packaging News

FAF deciding on filters on post to be syndicated:

Macfarlane survey finds rise in recyclable packs for e-commerce

Array ( [post_title] => Macfarlane survey finds rise in recyclable packs for e-commerce [post_content] =>

Macfarlane Packaging has seen a rise in consumers receiving recyclable e-commerce packaging.

This story continues at Macfarlane survey finds rise in recyclable packs for e-commerce

Or just read more coverage at Packaging News

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => News – Packaging News [syndication_source_uri] => https://www.packagingnews.co.uk [syndication_source_id] => http://www.packagingnews.co.uk/category/news/feed/ [rss:comments] => https://www.packagingnews.co.uk/news/macfarlane-survey-finds-rise-recyclable-packs-e-commerce-25-09-2020#respond [wfw:commentRSS] => https://www.packagingnews.co.uk/news/macfarlane-survey-finds-rise-recyclable-packs-e-commerce-25-09-2020/feed [syndication_feed] => http://www.packagingnews.co.uk/category/news/feed/ [syndication_feed_id] => 39 [syndication_permalink] => https://www.packagingnews.co.uk/news/macfarlane-survey-finds-rise-recyclable-packs-e-commerce-25-09-2020 [syndication_item_hash] => 7f5c8056956259381eb3a1054e3430c8 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Macfarlane survey finds rise in recyclable packs for e-commerce

Array ( [post_title] => Macfarlane survey finds rise in recyclable packs for e-commerce [post_content] =>

Macfarlane Packaging has seen a rise in consumers receiving recyclable e-commerce packaging.

This story continues at Macfarlane survey finds rise in recyclable packs for e-commerce

Or just read more coverage at Packaging News

FAF deciding on filters on post to be syndicated:

Greiner Packaging claims 33% material saving with cardboard-plastic combo

Array ( [post_title] => Greiner Packaging claims 33% material saving with cardboard-plastic combo [post_content] =>

Greiner Packaging is marketing its K3 cardboard-plastic combination as a solution to both the impending plastic tax regulation and saving ‘up to 33% plastic’.

This story continues at Greiner Packaging claims 33% material saving with cardboard-plastic combo

Or just read more coverage at Packaging News

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => News – Packaging News [syndication_source_uri] => https://www.packagingnews.co.uk [syndication_source_id] => http://www.packagingnews.co.uk/category/news/feed/ [rss:comments] => https://www.packagingnews.co.uk/news/markets/food/greiner-packaging-claims-33-material-saving-cardboard-plastic-combo-25-09-2020#respond [wfw:commentRSS] => https://www.packagingnews.co.uk/news/markets/food/greiner-packaging-claims-33-material-saving-cardboard-plastic-combo-25-09-2020/feed [syndication_feed] => http://www.packagingnews.co.uk/category/news/feed/ [syndication_feed_id] => 39 [syndication_permalink] => https://www.packagingnews.co.uk/news/markets/food/greiner-packaging-claims-33-material-saving-cardboard-plastic-combo-25-09-2020 [syndication_item_hash] => fe4a26a32deee46f2b3ff599286e2b4a )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Greiner Packaging claims 33% material saving with cardboard-plastic combo

Array ( [post_title] => Greiner Packaging claims 33% material saving with cardboard-plastic combo [post_content] =>

Greiner Packaging is marketing its K3 cardboard-plastic combination as a solution to both the impending plastic tax regulation and saving ‘up to 33% plastic’.

This story continues at Greiner Packaging claims 33% material saving with cardboard-plastic combo

Or just read more coverage at Packaging News

FAF deciding on filters on post to be syndicated:

Luxury Packaging Awards 2020 | Event update

Array ( [post_title] => Luxury Packaging Awards 2020 | Event update [post_content] =>

Packaging News has taken the decision to postpone this year’s Luxury Packaging Awards event, which was scheduled to take place at Edinburgh’s Assembly Rooms in November.

This story continues at Luxury Packaging Awards 2020 | Event update

Or just read more coverage at Packaging News

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => News – Packaging News [syndication_source_uri] => https://www.packagingnews.co.uk [syndication_source_id] => http://www.packagingnews.co.uk/category/news/feed/ [rss:comments] => https://www.packagingnews.co.uk/news/luxury-packaging-awards-2020-event-update-25-09-2020#respond [wfw:commentRSS] => https://www.packagingnews.co.uk/news/luxury-packaging-awards-2020-event-update-25-09-2020/feed [syndication_feed] => http://www.packagingnews.co.uk/category/news/feed/ [syndication_feed_id] => 39 [syndication_permalink] => https://www.packagingnews.co.uk/news/luxury-packaging-awards-2020-event-update-25-09-2020 [syndication_item_hash] => 16811fa0320b20b29d2f89055b6b68c6 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Luxury Packaging Awards 2020 | Event update

Array ( [post_title] => Luxury Packaging Awards 2020 | Event update [post_content] =>

Packaging News has taken the decision to postpone this year’s Luxury Packaging Awards event, which was scheduled to take place at Edinburgh’s Assembly Rooms in November.

This story continues at Luxury Packaging Awards 2020 | Event update

Or just read more coverage at Packaging News

FAF deciding on filters on post to be syndicated:

Stora Enso starts production of formed fiber foodservice products

Array ( [post_title] => Stora Enso starts production of formed fiber foodservice products [post_content] =>

Stora Enso is producing new-generation formed fiber products which are free from plastic and PFAS.

This story continues at Stora Enso starts production of formed fiber foodservice products

Or just read more coverage at Packaging News

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => News – Packaging News [syndication_source_uri] => https://www.packagingnews.co.uk [syndication_source_id] => http://www.packagingnews.co.uk/category/news/feed/ [rss:comments] => https://www.packagingnews.co.uk/news/markets/foodservice/stora-enso-starts-production-formed-fiber-foodservice-products-25-09-2020#respond [wfw:commentRSS] => https://www.packagingnews.co.uk/news/markets/foodservice/stora-enso-starts-production-formed-fiber-foodservice-products-25-09-2020/feed [syndication_feed] => http://www.packagingnews.co.uk/category/news/feed/ [syndication_feed_id] => 39 [syndication_permalink] => https://www.packagingnews.co.uk/news/markets/foodservice/stora-enso-starts-production-formed-fiber-foodservice-products-25-09-2020 [syndication_item_hash] => 403d00019e6896131abf6e1792e572ae )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Stora Enso starts production of formed fiber foodservice products

Array ( [post_title] => Stora Enso starts production of formed fiber foodservice products [post_content] =>

Stora Enso is producing new-generation formed fiber products which are free from plastic and PFAS.

This story continues at Stora Enso starts production of formed fiber foodservice products

Or just read more coverage at Packaging News

FAF deciding on filters on post to be syndicated:

Parkside launches new sustainable packaging portfolio

Array ( [post_title] => Parkside launches new sustainable packaging portfolio [post_content] =>

Flexible packaging specialist Parkside has announced the launch of a new range of sustainable packaging solutions that respond to growing consumer concerns.

This story continues at Parkside launches new sustainable packaging portfolio

Or just read more coverage at Packaging News

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => News – Packaging News [syndication_source_uri] => https://www.packagingnews.co.uk [syndication_source_id] => http://www.packagingnews.co.uk/category/news/feed/ [rss:comments] => https://www.packagingnews.co.uk/news/materials/flexible-plastics/parkside-launches-new-sustainable-packaging-portfolio-25-09-2020#respond [wfw:commentRSS] => https://www.packagingnews.co.uk/news/materials/flexible-plastics/parkside-launches-new-sustainable-packaging-portfolio-25-09-2020/feed [syndication_feed] => http://www.packagingnews.co.uk/category/news/feed/ [syndication_feed_id] => 39 [syndication_permalink] => https://www.packagingnews.co.uk/news/materials/flexible-plastics/parkside-launches-new-sustainable-packaging-portfolio-25-09-2020 [syndication_item_hash] => ad10d6bdb761dd80ed592c4cb4287ca9 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Parkside launches new sustainable packaging portfolio

Array ( [post_title] => Parkside launches new sustainable packaging portfolio [post_content] =>

Flexible packaging specialist Parkside has announced the launch of a new range of sustainable packaging solutions that respond to growing consumer concerns.

This story continues at Parkside launches new sustainable packaging portfolio

Or just read more coverage at Packaging News

FAF deciding on filters on post to be syndicated:

PRN Pricewatch: Week ending 11 September 2020

Array ( [post_title] => PRN Pricewatch: Week ending 11 September 2020 [post_content] =>

Each week we publish the average trading price for packaging recovery notes from PRN marketplace The Environment Exchange.

This story continues at PRN Pricewatch: Week ending 11 September 2020

Or just read more coverage at Packaging News

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => News – Packaging News [syndication_source_uri] => https://www.packagingnews.co.uk [syndication_source_id] => http://www.packagingnews.co.uk/category/news/feed/ [rss:comments] => https://www.packagingnews.co.uk/news/environment/prn-pricewatch/prn-11-sept-2020-24-09-2020#respond [wfw:commentRSS] => https://www.packagingnews.co.uk/news/environment/prn-pricewatch/prn-11-sept-2020-24-09-2020/feed [syndication_feed] => http://www.packagingnews.co.uk/category/news/feed/ [syndication_feed_id] => 39 [syndication_permalink] => https://www.packagingnews.co.uk/news/environment/prn-pricewatch/prn-11-sept-2020-24-09-2020 [syndication_item_hash] => c0d8488c291059597f3144e610bfe9ed )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :PRN Pricewatch: Week ending 11 September 2020

Array ( [post_title] => PRN Pricewatch: Week ending 11 September 2020 [post_content] =>

Each week we publish the average trading price for packaging recovery notes from PRN marketplace The Environment Exchange.

This story continues at PRN Pricewatch: Week ending 11 September 2020

Or just read more coverage at Packaging News

FAF deciding on filters on post to be syndicated:

Boots recycling scheme offers points incentive

Array ( [post_title] => Boots recycling scheme offers points incentive [post_content] =>

Boots UK is rolling out a new recycling scheme from today (24 September), encouraging customers to bring back hard-to-recycle health, beauty and wellness product packaging.

This story continues at Boots recycling scheme offers points incentive

Or just read more coverage at Packaging News

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => News – Packaging News [syndication_source_uri] => https://www.packagingnews.co.uk [syndication_source_id] => http://www.packagingnews.co.uk/category/news/feed/ [rss:comments] => https://www.packagingnews.co.uk/news/environment/recycling/boots-recycling-scheme-offers-points-incentive-24-09-2020#respond [wfw:commentRSS] => https://www.packagingnews.co.uk/news/environment/recycling/boots-recycling-scheme-offers-points-incentive-24-09-2020/feed [syndication_feed] => http://www.packagingnews.co.uk/category/news/feed/ [syndication_feed_id] => 39 [syndication_permalink] => https://www.packagingnews.co.uk/news/environment/recycling/boots-recycling-scheme-offers-points-incentive-24-09-2020 [syndication_item_hash] => 1bfdcb8127469b601fbc173ba5741e38 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Boots recycling scheme offers points incentive

Array ( [post_title] => Boots recycling scheme offers points incentive [post_content] =>

Boots UK is rolling out a new recycling scheme from today (24 September), encouraging customers to bring back hard-to-recycle health, beauty and wellness product packaging.

This story continues at Boots recycling scheme offers points incentive

Or just read more coverage at Packaging News

FAF deciding on filters on post to be syndicated:

Which? claims only 34% of packs are fully recyclable

Array ( [post_title] => Which? claims only 34% of packs are fully recyclable [post_content] =>

Which? has targeted household names for its “non-recyclable” packaging with Cadbury’s and Babybel among the brands under scrutiny.

This story continues at Which? claims only 34% of packs are fully recyclable

Or just read more coverage at Packaging News

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => ) [syndication_source] => News – Packaging News [syndication_source_uri] => https://www.packagingnews.co.uk [syndication_source_id] => http://www.packagingnews.co.uk/category/news/feed/ [rss:comments] => https://www.packagingnews.co.uk/news/claims-34-packs-fully-reyclable-24-09-2020#respond [wfw:commentRSS] => https://www.packagingnews.co.uk/news/claims-34-packs-fully-reyclable-24-09-2020/feed [syndication_feed] => http://www.packagingnews.co.uk/category/news/feed/ [syndication_feed_id] => 39 [syndication_permalink] => https://www.packagingnews.co.uk/news/claims-34-packs-fully-reyclable-24-09-2020 [syndication_item_hash] => 02313337a9e576e26ccae01d23f71f8c )

Execute : Enclosure images

Enclosure save:

Array ( [0] => )

No match on

Decide filter: Returning post, everything seems orderly :Which? claims only 34% of packs are fully recyclable

Array ( [post_title] => Which? claims only 34% of packs are fully recyclable [post_content] =>

Which? has targeted household names for its “non-recyclable” packaging with Cadbury’s and Babybel among the brands under scrutiny.

This story continues at Which? claims only 34% of packs are fully recyclable

Or just read more coverage at Packaging News

FAF deciding on filters on post to be syndicated:

Slotless versus slotted brushless DC motors

Array ( [post_title] => Slotless versus slotted brushless DC motors [post_content] =>

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=189855 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/181066/Slotless-versus-slotted-brushless-DC-motors.aspx [syndication_item_hash] => cfab9dd6f1aed383501e2613d1a68849 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=189855 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=189855 image/jpeg

Decide filter: Returning post, everything seems orderly :Slotless versus slotted brushless DC motors

Array ( [post_title] => Slotless versus slotted brushless DC motors [post_content] =>

FAF deciding on filters on post to be syndicated:

High-performance handheld barcode readers

Array ( [post_title] => High-performance handheld barcode readers [post_content] =>

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=189854 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/181065/High-performance-handheld-barcode-readers.aspx [syndication_item_hash] => 3f5576e30a4f3a1a3c2ce8a6530d8034 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=189854 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=189854 image/jpeg

Decide filter: Returning post, everything seems orderly :High-performance handheld barcode readers

Array ( [post_title] => High-performance handheld barcode readers [post_content] =>

FAF deciding on filters on post to be syndicated:

Android tablet for hazardous areas

Array ( [post_title] => Android tablet for hazardous areas [post_content] =>

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=189853 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/181064/Android-tablet-for-hazardous-areas.aspx [syndication_item_hash] => 73c941fea1600315db0b95c223293da7 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=189853 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=189853 image/jpeg

Decide filter: Returning post, everything seems orderly :Android tablet for hazardous areas

Array ( [post_title] => Android tablet for hazardous areas [post_content] =>

FAF deciding on filters on post to be syndicated:

Agility is the key in IIoT innovation

Array ( [post_title] => Agility is the key in IIoT innovation [post_content] =>

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=189852 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/181063/Agility-is-the-key-in-IIoT-innovation.aspx [syndication_item_hash] => 209d8025dc6f6554d75ed9433c39df5d )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=189852 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=189852 image/jpeg

Decide filter: Returning post, everything seems orderly :Agility is the key in IIoT innovation

Array ( [post_title] => Agility is the key in IIoT innovation [post_content] =>

FAF deciding on filters on post to be syndicated:

Drive, don’t delegate the digital transformation

Array ( [post_title] => Drive, don’t delegate the digital transformation [post_content] =>

Doing filter:faf_image_filter

Execute image filter

Image process

No image matches

Array ( )

Array ( [enclosure] => Array ( [0] => global/showimage.ashx?Type=Article&ID=189851 image/jpeg ) [syndication_source] => Control Engineering Europe - All Articles [syndication_source_uri] => https://www.controlengeurope.com/rss/all.ashx [syndication_source_id] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed] => http://www.controlengeurope.com/rss/all.ashx [syndication_feed_id] => 17 [syndication_permalink] => https://www.controlengeurope.com/rss/rss/article/181062/Drive--don-t-delegate-the-digital-transformation.aspx [syndication_item_hash] => 0f9838edb3de02581b95d6af82943c93 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => global/showimage.ashx?Type=Article&ID=189851 image/jpeg )

No match on global/showimage.ashx?Type=Article&ID=189851 image/jpeg

Decide filter: Returning post, everything seems orderly :Drive, don’t delegate the digital transformation

Array ( [post_title] => Drive, don’t delegate the digital transformation [post_content] =>

FAF deciding on filters on post to be syndicated:

Connecting industrial applications to a private 5G network

Array ( [post_title] => Connecting industrial applications to a private 5G network [post_content] =>