Pinning Technology for Clean Transfer is a unique plate technology engineered by Asahi Photoproducts to transfer all remaining ink to the print substrate due to the photopolymer plates having a lower surface energy than other plates on the market. Not only does this deliver stunning graphical quality, but it also improves overall production efficiencies due to reduced makeready waste and fewer press wash-ups.
Asahi AWP™ water-washable plates use Pinning Technology for Clean Transfer. This enables them to produce superior results compared to both traditional and digital flexographic printing plates. They also are a more environmentally sustainable solution. It should be noted that up to 15 litres of solvent per plate are used in the solvent-based platemaking process. The entire AWPTM plate manufacturing process creates little waste, just unexposed polymer residues and wash out solution, which are collected and safely incinerated.
In a recent controlled test comparing water-washable plates to standard solvent-based plates, results indicated operations could achieve in an immediate ROI when switching to these plates.
- For the conventional plate, the run length was 37,368 linear metres. It took a total running time of 173 minutes. Total press down time was 47 minutes for plate cleaning and make-ready. Waste produced was 1,025 metres. OEE efficiency was calculated to be 72%.
- For the Pinning Technology plates, the run length was 38,000 linear metres. It took a total running time of 140 minutes. Total press down time was 8 minutes for plate cleaning and make-ready. Waste produced was 450 metres OEE efficiency was calculated to be 91%.
Pinning Technology plates produced 575 linear meters less waste material. They resulted in a 26% improvement in overall equipment effectiveness (OEE) with fewer press stops for plate cleaning and more consistent overall quality. For a 24-hour operation, this translates to the ability to process at least two additional jobs per day at a higher quality level with more contrast and less environmental impact.
The cost benefit of the AWP plate may vary depending on the customer’s production profile but is typically between 25% – 35% vs. conventional plate technologies.
Due to their exceptionally precise registration, plates with Pinning Technology for Clean Transfer also make it easier to implement Fixed Colour Palette printing to virtually eliminate the need for spot colour inks, reducing ink inventories and minimising or eliminating the need for press wash-ups between jobs.
Using fixed colour palette printing, the breakeven between flexo and digital printing continues to fall to as short a run length as 350 metres. This means that flexo is competitive with digital for all but the shortest runs, and there are many benefits packaging converters can gain by moving to this model, including very short job changeover times with minimal or no wash-up and limited waste due to the fact that inks do not have to be changed. Plus, more than 90% of Pantone colours can be accurately rendered using fixed colour palette printing.
Pinning Technology for Clean Transfer is an innovation in flexographic plate technology and a win/win for forward-thinking flexo printers.
Source: FlexoGlobal Blog