Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/41/d79740523/htdocs/converternews/wp-content/plugins/feedwordpress/syndicatedlink.class.php on line 302

FAF deciding on filters on post to be syndicated:

Success Story from Kollmorgen – Bricks that can put in an appearance

Array ( [post_title] => Success Story from Kollmorgen – Bricks that can put in an appearance [post_content] =>

Motion Control by KOLLMORGEN makes fast and precise cuts from the column of clay

Kollmorgen - Success Story

Neat as a pin, each brick on the pallet is identical to the next. Deviations at the building site are accepted only within tight tolerances. Standardized measurements are already in demand simply because bricklayers these days rarely lay the vertically perforated bricks with mortar but glue them together with thin-bed mortar as piece work. Balancing gaps – error reports. And then every deviation from the norm also costs time – which is why manufacturers such as the Swiss brick manufacturer Landquart AG is continuously improving its established production process. To cut off the endless column of clay into individual bricks, the company has now integrated a servomotor driven module.

It is iron compounds which give clay bricks their typically orange-brown color. The precise color that the building materials ultimately take on depends just as much on the minerals contained within the clay as the firing temperature and the prevailing atmosphere in the oven. There are a number of adjustment screws which the manufacturers of so-called coarse-ceramic products can turn so that the construction industry can deliver perfect bricks. In so doing, it is important to observe that a good brick – with all its claims to automation – still takes time. The most important components of brick are loam, clays and marl.

Cut clean from the endless column

The brick manufacturer Landquart from the place of the same name in the canton of Graubünden extracts the clay from its own clay pit. “Before it is shaped, the ingredients need to be well mixed and, with a view to a homogeneous distribution of moisture, temporarily stored for days. Only then can the paste go into the extruder which compacts the mineral mixture and presses it through its mouthpiece. This creates an endless brick with a fixed length and width. The height is achieved from the speed at which the cutter from the Swiss company Freymatic AG works,” explains Daniel Bärtsch, Plant Manager at the Landquart AG brickworks.

Success StoryCharacteristic for the cut is the combination of the continuous feed of the clay column from the extruder and the discontinuous cutting. To do this, it takes the basic drive arrangement of the flying saw – in essence designed like a thin steel wire which runs from top to bottom through the soft clay columns like a harp string in time with the band speed. The cutter by Freymatic is at the same time cyclically positioned by a Thomson linear axis and synchronized with the band speed. To drive the linear unit with its interior ball screw, TBM Automation AG opts for synchronous servo motors in the AKM series by KOLLMORGEN. TBM and Freymatic have fostered a trusting collaboration for many years in matters of drive technology, motion control and automation. “We need to understand the processes, know how our customers think and then learn about the intricacies from our growing experience,” says Silverster Tribus, Managing Director at TBM. The Swiss engineering specialists from Widnau have on their part been cooperating closely with KOLLMORGEN as a certified partner.

Drive simulation from the workstation

In the past, the vast majority of functions needed to be constantly re-programmed – and a huge amount of code needed to be written for this. “These days, we pull our prepared blocks into a motion project – and that’s it.” In conjunction with graphic programming, the on-site engineers can see considerably better “what impact each of the changing parameters has”. The basis for this unerring and efficient way of working is created by the Kollmorgen Automation Suite – above all in the design of the pipe network contained within.

Pipe Network clearly and precisely replicates the machine architecture including the dependencies between the axes of an application in a very short space of time. The otherwise very complex programming in Pipe Network is replaced by a graphic description with drag-and-drop function. Starting from a virtual master, all functions and relationships between components as well as all movements and settings can be defined with graphic description blocks. If the system is available, the Kollmorgen Automation Suite also offers the opportunity for virtual simulation. Movement profiles, axis conditions or synchronizations can be optimized in real time without the need to connect a single device.

“This is a real advantage because we can test the axes in the office and initiate start up with a prepared, fault-free application,” stresses Danijel Todorovic-Grabher, Senior project manager at TBM Automation. If adjustments need to be made on site, there is a KOLLMORGEN touch panel at the ready right by the system in the brickworks. “We can simply leaf through the drives and don’t need an additional laptop on site.”

Additional overload capacity protects against process fluctuations

The user-dependent access for this in the first step is carried out on the freely programmable controls in the IEC 61131-3 languages. It is part of the functional scope of the KOLLMORGEN Motion Controller PCMM. The compact device takes on the sequential control and the motion control of the connected AKD servo drives with the AKM synchronous servo motors. Motion Control has designed TBM in such a sophisticated way that the machine actually removes the bricks from the column with the beautifully soft motion task profiles. At the Landquart brickworks, the unit is placed directly between the formed part of the extruder and the discharge conveyor. The high overload capacity of the AKM motors up to five times the nominal current ensures that, during operation, the sudden occurrence of speed fluctuations does not lead to a fault in the cutting process. Changed requirements in power are not a rarity in the brick industry; they actually happen on a regular basis. After all, it’s a natural product with a fluctuating consistency that is processed into bricks fully automatically.

Against this background, it is also common practice to regularly optimize the settings of the cutting unit. The water in the clay alone or the detailed changing composition of minerals changes the mechanical shaping of the brick which is still highly sensitive after extrusion. The motion control for taking the cut raw bricks away for drying is configured in a similarly challenging way. Days later, it then goes into the oven for several hours.

For the flow of materials, Freymatic also opts for servo axes by Kollmorgen which are coordinated alongside the multi-axis arrangements of the PCMM. From the viewpoint of motion control, this process is characterized by exactly managed acceleration and braking profiles which transport off and therefore separate the bricks during production. Integrated into the automation is the pallet loader which pushes metal profiles from a magazine under the bricks for their further transportation.

This is what good clay needs

A view into the clay industry shows how existing systems have allowed themselves to become efficiently modernized when machine engineers, system integrators and drive manufacturers work closely together.

“We present data about what quantity needs to be shifted and what times and accuracy are required,” says Marco Breitenmoser, head of construction at Freymatic. “TBM then uses this as a basis to make proposals.” Good clay has for many years relied on the cooperation between Freymatic and TBM discussing jobs together and then also finding the best solution together. “Our expertise lies predominantly in the machine concept and TBM’s is in the drive technology and automation,” says Marco Breitenmoser in summary.

Author:
Martin Zimmermann, Key Account Manager, KOLLMORGEN Switzerland

 

Disclaimer
The use of this news article and images came with permission from Kollmorgen.

[post_excerpt] => Motion Control by KOLLMORGEN makes fast and precise cuts from the column of clay Neat as a pin, each brick on the pallet is identical to the next. Deviations at the building site are accepted only within tight tolerances. Standardized measurements are already in demand simply because bricklayers these days rarely lay the vertically perforated […] [post_date_gmt] => 2019-07-17 12:59:06 [post_date] => 2019-07-17 12:59:06 [post_modified_gmt] => 2019-07-17 12:59:06 [post_modified] => 2019-07-17 12:59:06 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://micromech.wordpress.com/?p=1210 [meta] => Array ( [enclosure] => Array ( [0] => https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G [1] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_bricks_1.jpg [2] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_bricks_2.jpg ) [syndication_source] => Micromech Limited's space [syndication_source_uri] => https://micromech.wordpress.com [syndication_source_id] => http://micromech.wordpress.com/feed/ [rss:comments] => https://micromech.wordpress.com/2019/07/17/success-story-from-kollmorgen-bricks-that-can-put-in-an-appearance/#respond [wfw:commentRSS] => https://micromech.wordpress.com/2019/07/17/success-story-from-kollmorgen-bricks-that-can-put-in-an-appearance/feed/ [syndication_feed] => http://micromech.wordpress.com/feed/ [syndication_feed_id] => 72 [syndication_permalink] => https://micromech.wordpress.com/2019/07/17/success-story-from-kollmorgen-bricks-that-can-put-in-an-appearance/ [syndication_item_hash] => 8352096f9689a65258c11ac6f3fb5e93 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 27 [1] => 97 ) [post_tag] => Array ( [0] => 3352 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_bricks_1.jpg

Image process :: Saving local image

grab remote location : https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_bricks_1.jpg

Image exists, checking for same file size

Replacing images : Kollmorgen - Success Story - Kollmorgen - Success Story ON

Motion Control by KOLLMORGEN makes fast and precise cuts from the column of clay

Kollmorgen - Success Story

Neat as a pin, each brick on the pallet is identical to the next. Deviations at the building site are accepted only within tight tolerances. Standardized measurements are already in demand simply because bricklayers these days rarely lay the vertically perforated bricks with mortar but glue them together with thin-bed mortar as piece work. Balancing gaps – error reports. And then every deviation from the norm also costs time – which is why manufacturers such as the Swiss brick manufacturer Landquart AG is continuously improving its established production process. To cut off the endless column of clay into individual bricks, the company has now integrated a servomotor driven module.

It is iron compounds which give clay bricks their typically orange-brown color. The precise color that the building materials ultimately take on depends just as much on the minerals contained within the clay as the firing temperature and the prevailing atmosphere in the oven. There are a number of adjustment screws which the manufacturers of so-called coarse-ceramic products can turn so that the construction industry can deliver perfect bricks. In so doing, it is important to observe that a good brick – with all its claims to automation – still takes time. The most important components of brick are loam, clays and marl.

Cut clean from the endless column

The brick manufacturer Landquart from the place of the same name in the canton of Graubünden extracts the clay from its own clay pit. “Before it is shaped, the ingredients need to be well mixed and, with a view to a homogeneous distribution of moisture, temporarily stored for days. Only then can the paste go into the extruder which compacts the mineral mixture and presses it through its mouthpiece. This creates an endless brick with a fixed length and width. The height is achieved from the speed at which the cutter from the Swiss company Freymatic AG works,” explains Daniel Bärtsch, Plant Manager at the Landquart AG brickworks.

Success StoryCharacteristic for the cut is the combination of the continuous feed of the clay column from the extruder and the discontinuous cutting. To do this, it takes the basic drive arrangement of the flying saw – in essence designed like a thin steel wire which runs from top to bottom through the soft clay columns like a harp string in time with the band speed. The cutter by Freymatic is at the same time cyclically positioned by a Thomson linear axis and synchronized with the band speed. To drive the linear unit with its interior ball screw, TBM Automation AG opts for synchronous servo motors in the AKM series by KOLLMORGEN. TBM and Freymatic have fostered a trusting collaboration for many years in matters of drive technology, motion control and automation. “We need to understand the processes, know how our customers think and then learn about the intricacies from our growing experience,” says Silverster Tribus, Managing Director at TBM. The Swiss engineering specialists from Widnau have on their part been cooperating closely with KOLLMORGEN as a certified partner.

Drive simulation from the workstation

In the past, the vast majority of functions needed to be constantly re-programmed – and a huge amount of code needed to be written for this. “These days, we pull our prepared blocks into a motion project – and that’s it.” In conjunction with graphic programming, the on-site engineers can see considerably better “what impact each of the changing parameters has”. The basis for this unerring and efficient way of working is created by the Kollmorgen Automation Suite – above all in the design of the pipe network contained within.

Pipe Network clearly and precisely replicates the machine architecture including the dependencies between the axes of an application in a very short space of time. The otherwise very complex programming in Pipe Network is replaced by a graphic description with drag-and-drop function. Starting from a virtual master, all functions and relationships between components as well as all movements and settings can be defined with graphic description blocks. If the system is available, the Kollmorgen Automation Suite also offers the opportunity for virtual simulation. Movement profiles, axis conditions or synchronizations can be optimized in real time without the need to connect a single device.

“This is a real advantage because we can test the axes in the office and initiate start up with a prepared, fault-free application,” stresses Danijel Todorovic-Grabher, Senior project manager at TBM Automation. If adjustments need to be made on site, there is a KOLLMORGEN touch panel at the ready right by the system in the brickworks. “We can simply leaf through the drives and don’t need an additional laptop on site.”

Additional overload capacity protects against process fluctuations

The user-dependent access for this in the first step is carried out on the freely programmable controls in the IEC 61131-3 languages. It is part of the functional scope of the KOLLMORGEN Motion Controller PCMM. The compact device takes on the sequential control and the motion control of the connected AKD servo drives with the AKM synchronous servo motors. Motion Control has designed TBM in such a sophisticated way that the machine actually removes the bricks from the column with the beautifully soft motion task profiles. At the Landquart brickworks, the unit is placed directly between the formed part of the extruder and the discharge conveyor. The high overload capacity of the AKM motors up to five times the nominal current ensures that, during operation, the sudden occurrence of speed fluctuations does not lead to a fault in the cutting process. Changed requirements in power are not a rarity in the brick industry; they actually happen on a regular basis. After all, it’s a natural product with a fluctuating consistency that is processed into bricks fully automatically.

Against this background, it is also common practice to regularly optimize the settings of the cutting unit. The water in the clay alone or the detailed changing composition of minerals changes the mechanical shaping of the brick which is still highly sensitive after extrusion. The motion control for taking the cut raw bricks away for drying is configured in a similarly challenging way. Days later, it then goes into the oven for several hours.

For the flow of materials, Freymatic also opts for servo axes by Kollmorgen which are coordinated alongside the multi-axis arrangements of the PCMM. From the viewpoint of motion control, this process is characterized by exactly managed acceleration and braking profiles which transport off and therefore separate the bricks during production. Integrated into the automation is the pallet loader which pushes metal profiles from a magazine under the bricks for their further transportation.

This is what good clay needs

A view into the clay industry shows how existing systems have allowed themselves to become efficiently modernized when machine engineers, system integrators and drive manufacturers work closely together.

“We present data about what quantity needs to be shifted and what times and accuracy are required,” says Marco Breitenmoser, head of construction at Freymatic. “TBM then uses this as a basis to make proposals.” Good clay has for many years relied on the cooperation between Freymatic and TBM discussing jobs together and then also finding the best solution together. “Our expertise lies predominantly in the machine concept and TBM’s is in the drive technology and automation,” says Marco Breitenmoser in summary.

Author:
Martin Zimmermann, Key Account Manager, KOLLMORGEN Switzerland

 

Disclaimer
The use of this news article and images came with permission from Kollmorgen.

Local save:https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_bricks_2.jpg

Image process :: Saving local image

grab remote location : https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_bricks_2.jpg

Image exists, checking for same file size

Replacing images : Success Story - Success Story ON

Motion Control by KOLLMORGEN makes fast and precise cuts from the column of clay

Success Story from Kollmorgen – Bricks that can put in an appearance

Neat as a pin, each brick on the pallet is identical to the next. Deviations at the building site are accepted only within tight tolerances. Standardized measurements are already in demand simply because bricklayers these days rarely lay the vertically perforated bricks with mortar but glue them together with thin-bed mortar as piece work. Balancing gaps – error reports. And then every deviation from the norm also costs time – which is why manufacturers such as the Swiss brick manufacturer Landquart AG is continuously improving its established production process. To cut off the endless column of clay into individual bricks, the company has now integrated a servomotor driven module.

It is iron compounds which give clay bricks their typically orange-brown color. The precise color that the building materials ultimately take on depends just as much on the minerals contained within the clay as the firing temperature and the prevailing atmosphere in the oven. There are a number of adjustment screws which the manufacturers of so-called coarse-ceramic products can turn so that the construction industry can deliver perfect bricks. In so doing, it is important to observe that a good brick – with all its claims to automation – still takes time. The most important components of brick are loam, clays and marl.

Cut clean from the endless column

The brick manufacturer Landquart from the place of the same name in the canton of Graubünden extracts the clay from its own clay pit. “Before it is shaped, the ingredients need to be well mixed and, with a view to a homogeneous distribution of moisture, temporarily stored for days. Only then can the paste go into the extruder which compacts the mineral mixture and presses it through its mouthpiece. This creates an endless brick with a fixed length and width. The height is achieved from the speed at which the cutter from the Swiss company Freymatic AG works,” explains Daniel Bärtsch, Plant Manager at the Landquart AG brickworks.

Success StoryCharacteristic for the cut is the combination of the continuous feed of the clay column from the extruder and the discontinuous cutting. To do this, it takes the basic drive arrangement of the flying saw – in essence designed like a thin steel wire which runs from top to bottom through the soft clay columns like a harp string in time with the band speed. The cutter by Freymatic is at the same time cyclically positioned by a Thomson linear axis and synchronized with the band speed. To drive the linear unit with its interior ball screw, TBM Automation AG opts for synchronous servo motors in the AKM series by KOLLMORGEN. TBM and Freymatic have fostered a trusting collaboration for many years in matters of drive technology, motion control and automation. “We need to understand the processes, know how our customers think and then learn about the intricacies from our growing experience,” says Silverster Tribus, Managing Director at TBM. The Swiss engineering specialists from Widnau have on their part been cooperating closely with KOLLMORGEN as a certified partner.

Drive simulation from the workstation

In the past, the vast majority of functions needed to be constantly re-programmed – and a huge amount of code needed to be written for this. “These days, we pull our prepared blocks into a motion project – and that’s it.” In conjunction with graphic programming, the on-site engineers can see considerably better “what impact each of the changing parameters has”. The basis for this unerring and efficient way of working is created by the Kollmorgen Automation Suite – above all in the design of the pipe network contained within.

Pipe Network clearly and precisely replicates the machine architecture including the dependencies between the axes of an application in a very short space of time. The otherwise very complex programming in Pipe Network is replaced by a graphic description with drag-and-drop function. Starting from a virtual master, all functions and relationships between components as well as all movements and settings can be defined with graphic description blocks. If the system is available, the Kollmorgen Automation Suite also offers the opportunity for virtual simulation. Movement profiles, axis conditions or synchronizations can be optimized in real time without the need to connect a single device.

“This is a real advantage because we can test the axes in the office and initiate start up with a prepared, fault-free application,” stresses Danijel Todorovic-Grabher, Senior project manager at TBM Automation. If adjustments need to be made on site, there is a KOLLMORGEN touch panel at the ready right by the system in the brickworks. “We can simply leaf through the drives and don’t need an additional laptop on site.”

Additional overload capacity protects against process fluctuations

The user-dependent access for this in the first step is carried out on the freely programmable controls in the IEC 61131-3 languages. It is part of the functional scope of the KOLLMORGEN Motion Controller PCMM. The compact device takes on the sequential control and the motion control of the connected AKD servo drives with the AKM synchronous servo motors. Motion Control has designed TBM in such a sophisticated way that the machine actually removes the bricks from the column with the beautifully soft motion task profiles. At the Landquart brickworks, the unit is placed directly between the formed part of the extruder and the discharge conveyor. The high overload capacity of the AKM motors up to five times the nominal current ensures that, during operation, the sudden occurrence of speed fluctuations does not lead to a fault in the cutting process. Changed requirements in power are not a rarity in the brick industry; they actually happen on a regular basis. After all, it’s a natural product with a fluctuating consistency that is processed into bricks fully automatically.

Against this background, it is also common practice to regularly optimize the settings of the cutting unit. The water in the clay alone or the detailed changing composition of minerals changes the mechanical shaping of the brick which is still highly sensitive after extrusion. The motion control for taking the cut raw bricks away for drying is configured in a similarly challenging way. Days later, it then goes into the oven for several hours.

For the flow of materials, Freymatic also opts for servo axes by Kollmorgen which are coordinated alongside the multi-axis arrangements of the PCMM. From the viewpoint of motion control, this process is characterized by exactly managed acceleration and braking profiles which transport off and therefore separate the bricks during production. Integrated into the automation is the pallet loader which pushes metal profiles from a magazine under the bricks for their further transportation.

This is what good clay needs

A view into the clay industry shows how existing systems have allowed themselves to become efficiently modernized when machine engineers, system integrators and drive manufacturers work closely together.

“We present data about what quantity needs to be shifted and what times and accuracy are required,” says Marco Breitenmoser, head of construction at Freymatic. “TBM then uses this as a basis to make proposals.” Good clay has for many years relied on the cooperation between Freymatic and TBM discussing jobs together and then also finding the best solution together. “Our expertise lies predominantly in the machine concept and TBM’s is in the drive technology and automation,” says Marco Breitenmoser in summary.

Author:
Martin Zimmermann, Key Account Manager, KOLLMORGEN Switzerland

 

Disclaimer
The use of this news article and images came with permission from Kollmorgen.

Array ( [enclosure] => Array ( [0] => https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G [1] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_bricks_1.jpg [2] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_bricks_2.jpg ) [syndication_source] => Micromech Limited's space [syndication_source_uri] => https://micromech.wordpress.com [syndication_source_id] => http://micromech.wordpress.com/feed/ [rss:comments] => https://micromech.wordpress.com/2019/07/17/success-story-from-kollmorgen-bricks-that-can-put-in-an-appearance/#respond [wfw:commentRSS] => https://micromech.wordpress.com/2019/07/17/success-story-from-kollmorgen-bricks-that-can-put-in-an-appearance/feed/ [syndication_feed] => http://micromech.wordpress.com/feed/ [syndication_feed_id] => 72 [syndication_permalink] => https://micromech.wordpress.com/2019/07/17/success-story-from-kollmorgen-bricks-that-can-put-in-an-appearance/ [syndication_item_hash] => 8352096f9689a65258c11ac6f3fb5e93 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G [1] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_bricks_1.jpg [2] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_bricks_2.jpg )

No match on https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G

grab remote location : https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_bricks_1.jpg

Image exists, checking for same file size

New Enclosure:

grab remote location : https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_bricks_2.jpg

Image exists, checking for same file size

New Enclosure:

Decide filter: Returning post, everything seems orderly :Success Story from Kollmorgen – Bricks that can put in an appearance

Array ( [post_title] => Success Story from Kollmorgen – Bricks that can put in an appearance [post_content] =>

Motion Control by KOLLMORGEN makes fast and precise cuts from the column of clay

Success Story from Kollmorgen – Bricks that can put in an appearance

Neat as a pin, each brick on the pallet is identical to the next. Deviations at the building site are accepted only within tight tolerances. Standardized measurements are already in demand simply because bricklayers these days rarely lay the vertically perforated bricks with mortar but glue them together with thin-bed mortar as piece work. Balancing gaps – error reports. And then every deviation from the norm also costs time – which is why manufacturers such as the Swiss brick manufacturer Landquart AG is continuously improving its established production process. To cut off the endless column of clay into individual bricks, the company has now integrated a servomotor driven module.

It is iron compounds which give clay bricks their typically orange-brown color. The precise color that the building materials ultimately take on depends just as much on the minerals contained within the clay as the firing temperature and the prevailing atmosphere in the oven. There are a number of adjustment screws which the manufacturers of so-called coarse-ceramic products can turn so that the construction industry can deliver perfect bricks. In so doing, it is important to observe that a good brick – with all its claims to automation – still takes time. The most important components of brick are loam, clays and marl.

Cut clean from the endless column

The brick manufacturer Landquart from the place of the same name in the canton of Graubünden extracts the clay from its own clay pit. “Before it is shaped, the ingredients need to be well mixed and, with a view to a homogeneous distribution of moisture, temporarily stored for days. Only then can the paste go into the extruder which compacts the mineral mixture and presses it through its mouthpiece. This creates an endless brick with a fixed length and width. The height is achieved from the speed at which the cutter from the Swiss company Freymatic AG works,” explains Daniel Bärtsch, Plant Manager at the Landquart AG brickworks.

Success Story from Kollmorgen – Bricks that can put in an appearanceCharacteristic for the cut is the combination of the continuous feed of the clay column from the extruder and the discontinuous cutting. To do this, it takes the basic drive arrangement of the flying saw – in essence designed like a thin steel wire which runs from top to bottom through the soft clay columns like a harp string in time with the band speed. The cutter by Freymatic is at the same time cyclically positioned by a Thomson linear axis and synchronized with the band speed. To drive the linear unit with its interior ball screw, TBM Automation AG opts for synchronous servo motors in the AKM series by KOLLMORGEN. TBM and Freymatic have fostered a trusting collaboration for many years in matters of drive technology, motion control and automation. “We need to understand the processes, know how our customers think and then learn about the intricacies from our growing experience,” says Silverster Tribus, Managing Director at TBM. The Swiss engineering specialists from Widnau have on their part been cooperating closely with KOLLMORGEN as a certified partner.

Drive simulation from the workstation

In the past, the vast majority of functions needed to be constantly re-programmed – and a huge amount of code needed to be written for this. “These days, we pull our prepared blocks into a motion project – and that’s it.” In conjunction with graphic programming, the on-site engineers can see considerably better “what impact each of the changing parameters has”. The basis for this unerring and efficient way of working is created by the Kollmorgen Automation Suite – above all in the design of the pipe network contained within.

Pipe Network clearly and precisely replicates the machine architecture including the dependencies between the axes of an application in a very short space of time. The otherwise very complex programming in Pipe Network is replaced by a graphic description with drag-and-drop function. Starting from a virtual master, all functions and relationships between components as well as all movements and settings can be defined with graphic description blocks. If the system is available, the Kollmorgen Automation Suite also offers the opportunity for virtual simulation. Movement profiles, axis conditions or synchronizations can be optimized in real time without the need to connect a single device.

“This is a real advantage because we can test the axes in the office and initiate start up with a prepared, fault-free application,” stresses Danijel Todorovic-Grabher, Senior project manager at TBM Automation. If adjustments need to be made on site, there is a KOLLMORGEN touch panel at the ready right by the system in the brickworks. “We can simply leaf through the drives and don’t need an additional laptop on site.”

Additional overload capacity protects against process fluctuations

The user-dependent access for this in the first step is carried out on the freely programmable controls in the IEC 61131-3 languages. It is part of the functional scope of the KOLLMORGEN Motion Controller PCMM. The compact device takes on the sequential control and the motion control of the connected AKD servo drives with the AKM synchronous servo motors. Motion Control has designed TBM in such a sophisticated way that the machine actually removes the bricks from the column with the beautifully soft motion task profiles. At the Landquart brickworks, the unit is placed directly between the formed part of the extruder and the discharge conveyor. The high overload capacity of the AKM motors up to five times the nominal current ensures that, during operation, the sudden occurrence of speed fluctuations does not lead to a fault in the cutting process. Changed requirements in power are not a rarity in the brick industry; they actually happen on a regular basis. After all, it’s a natural product with a fluctuating consistency that is processed into bricks fully automatically.

Against this background, it is also common practice to regularly optimize the settings of the cutting unit. The water in the clay alone or the detailed changing composition of minerals changes the mechanical shaping of the brick which is still highly sensitive after extrusion. The motion control for taking the cut raw bricks away for drying is configured in a similarly challenging way. Days later, it then goes into the oven for several hours.

For the flow of materials, Freymatic also opts for servo axes by Kollmorgen which are coordinated alongside the multi-axis arrangements of the PCMM. From the viewpoint of motion control, this process is characterized by exactly managed acceleration and braking profiles which transport off and therefore separate the bricks during production. Integrated into the automation is the pallet loader which pushes metal profiles from a magazine under the bricks for their further transportation.

This is what good clay needs

A view into the clay industry shows how existing systems have allowed themselves to become efficiently modernized when machine engineers, system integrators and drive manufacturers work closely together.

“We present data about what quantity needs to be shifted and what times and accuracy are required,” says Marco Breitenmoser, head of construction at Freymatic. “TBM then uses this as a basis to make proposals.” Good clay has for many years relied on the cooperation between Freymatic and TBM discussing jobs together and then also finding the best solution together. “Our expertise lies predominantly in the machine concept and TBM’s is in the drive technology and automation,” says Marco Breitenmoser in summary.

Author:
Martin Zimmermann, Key Account Manager, KOLLMORGEN Switzerland

 

Disclaimer
The use of this news article and images came with permission from Kollmorgen.

[post_excerpt] => Motion Control by KOLLMORGEN makes fast and precise cuts from the column of clay Neat as a pin, each brick on the pallet is identical to the next. Deviations at the building site are accepted only within tight tolerances. Standardized measurements are already in demand simply because bricklayers these days rarely lay the vertically perforated […] [post_date_gmt] => 2019-07-17 12:59:06 [post_date] => 2019-07-17 12:59:06 [post_modified_gmt] => 2019-07-17 12:59:06 [post_modified] => 2019-07-17 12:59:06 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://micromech.wordpress.com/?p=1210 [meta] => Array ( [enclosure] => Array ( [0] => https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G [1] => [2] => ) [syndication_source] => Micromech Limited's space [syndication_source_uri] => https://micromech.wordpress.com [syndication_source_id] => http://micromech.wordpress.com/feed/ [rss:comments] => https://micromech.wordpress.com/2019/07/17/success-story-from-kollmorgen-bricks-that-can-put-in-an-appearance/#respond [wfw:commentRSS] => https://micromech.wordpress.com/2019/07/17/success-story-from-kollmorgen-bricks-that-can-put-in-an-appearance/feed/ [syndication_feed] => http://micromech.wordpress.com/feed/ [syndication_feed_id] => 72 [syndication_permalink] => https://micromech.wordpress.com/2019/07/17/success-story-from-kollmorgen-bricks-that-can-put-in-an-appearance/ [syndication_item_hash] => 8352096f9689a65258c11ac6f3fb5e93 [faf_featured_image] => 0 [faf_process_image] => 0,0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 27 [1] => 97 ) [post_tag] => Array ( [0] => 3352 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Available from Micromech – Premo, Wittenstein’s new powerful actuator platform

Array ( [post_title] => Available from Micromech – Premo, Wittenstein’s new powerful actuator platform [post_content] =>

Absolute precision meets perfect movement: premo combines precision with motion  – as efficiently as never before

Wittenstein - PremoThe central idea behind the first fully scalable servo-actuator platform from Wittenstein is an uncompromising flexibility from the viewpoint of the user. Motors and gearboxes with application related graduated performance characteristics can be configured modularly to individual motor/gearbox units. The result is a modular system that is significantly more versatile and more individual with regard to performance for the most diverse applications, that meets almost all the challenges of automation, integration and industry specification.

The core of the motor/gearbox unit is a torsionally rigid precision gearbox with low backlash and excellent torque density in conjunction with the equally powerful, permanently excited synchronous servo motor, which guarantees low cogging and a constant speed through the distributed winding.

The Premo actuator generation opens new dimensions in terms of performance with doubled power density and minimal installation space requirements. The Premo boasts increased productivity and optimised energy efficiency thanks to digital, single-cable technology providing more freedom during planning, design and storage as well as lower investment costs.

Typical fields of application:

–  Delta robot (axes 1-3, swivel axis)
–  Handling portal (Z axis, swivel/rotating)
–  Machine tool reaming
–  Tubular bag packaging
–  Folding carton packaging
–  Plastic thermoform (tool axis)
–  Intralogistics (AGV)

For more information on Wittenstein products contact Micromech sales on 01376 333333 or sales@micromech.co.uk

 

Disclaimer
The use of these images came with permission from Wittenstein.

[post_excerpt] => Absolute precision meets perfect movement: premo combines precision with motion  – as efficiently as never before The central idea behind the first fully scalable servo-actuator platform from Wittenstein is an uncompromising flexibility from the viewpoint of the user. Motors and gearboxes with application related graduated performance characteristics can be configured modularly to individual motor/gearbox units. […] [post_date_gmt] => 2019-07-16 09:33:50 [post_date] => 2019-07-16 09:33:50 [post_modified_gmt] => 2019-07-16 09:33:50 [post_modified] => 2019-07-16 09:33:50 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://micromech.wordpress.com/?p=1208 [meta] => Array ( [enclosure] => Array ( [0] => https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G [1] => https://www.micromech.co.uk/uploads/assets/news_2019/wittenstein_premo_servo_actuator.jpg ) [syndication_source] => Micromech Limited's space [syndication_source_uri] => https://micromech.wordpress.com [syndication_source_id] => http://micromech.wordpress.com/feed/ [rss:comments] => https://micromech.wordpress.com/2019/07/16/available-from-micromech-premo-wittensteins-new-powerful-actuator-platform/#respond [wfw:commentRSS] => https://micromech.wordpress.com/2019/07/16/available-from-micromech-premo-wittensteins-new-powerful-actuator-platform/feed/ [syndication_feed] => http://micromech.wordpress.com/feed/ [syndication_feed_id] => 72 [syndication_permalink] => https://micromech.wordpress.com/2019/07/16/available-from-micromech-premo-wittensteins-new-powerful-actuator-platform/ [syndication_item_hash] => 692416ce5e2f6530043460f006bb5ec7 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 27 [1] => 97 ) [post_tag] => Array ( [0] => 3352 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:https://www.micromech.co.uk/uploads/assets/news_2019/wittenstein_premo_servo_actuator.jpg

Image process :: Saving local image

grab remote location : https://www.micromech.co.uk/uploads/assets/news_2019/wittenstein_premo_servo_actuator.jpg

Image exists, checking for same file size

Replacing images : Wittenstein - Premo - Wittenstein - Premo ON

Absolute precision meets perfect movement: premo combines precision with motion  – as efficiently as never before

Wittenstein - PremoThe central idea behind the first fully scalable servo-actuator platform from Wittenstein is an uncompromising flexibility from the viewpoint of the user. Motors and gearboxes with application related graduated performance characteristics can be configured modularly to individual motor/gearbox units. The result is a modular system that is significantly more versatile and more individual with regard to performance for the most diverse applications, that meets almost all the challenges of automation, integration and industry specification.

The core of the motor/gearbox unit is a torsionally rigid precision gearbox with low backlash and excellent torque density in conjunction with the equally powerful, permanently excited synchronous servo motor, which guarantees low cogging and a constant speed through the distributed winding.

The Premo actuator generation opens new dimensions in terms of performance with doubled power density and minimal installation space requirements. The Premo boasts increased productivity and optimised energy efficiency thanks to digital, single-cable technology providing more freedom during planning, design and storage as well as lower investment costs.

Typical fields of application:

–  Delta robot (axes 1-3, swivel axis)
–  Handling portal (Z axis, swivel/rotating)
–  Machine tool reaming
–  Tubular bag packaging
–  Folding carton packaging
–  Plastic thermoform (tool axis)
–  Intralogistics (AGV)

For more information on Wittenstein products contact Micromech sales on 01376 333333 or sales@micromech.co.uk

 

Disclaimer
The use of these images came with permission from Wittenstein.

Array ( [enclosure] => Array ( [0] => https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G [1] => https://www.micromech.co.uk/uploads/assets/news_2019/wittenstein_premo_servo_actuator.jpg ) [syndication_source] => Micromech Limited's space [syndication_source_uri] => https://micromech.wordpress.com [syndication_source_id] => http://micromech.wordpress.com/feed/ [rss:comments] => https://micromech.wordpress.com/2019/07/16/available-from-micromech-premo-wittensteins-new-powerful-actuator-platform/#respond [wfw:commentRSS] => https://micromech.wordpress.com/2019/07/16/available-from-micromech-premo-wittensteins-new-powerful-actuator-platform/feed/ [syndication_feed] => http://micromech.wordpress.com/feed/ [syndication_feed_id] => 72 [syndication_permalink] => https://micromech.wordpress.com/2019/07/16/available-from-micromech-premo-wittensteins-new-powerful-actuator-platform/ [syndication_item_hash] => 692416ce5e2f6530043460f006bb5ec7 )

Execute : Enclosure images

Enclosure save:

Array ( [0] => https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G [1] => https://www.micromech.co.uk/uploads/assets/news_2019/wittenstein_premo_servo_actuator.jpg )

No match on https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G

grab remote location : https://www.micromech.co.uk/uploads/assets/news_2019/wittenstein_premo_servo_actuator.jpg

Image exists, checking for same file size

New Enclosure:

Decide filter: Returning post, everything seems orderly :Available from Micromech – Premo, Wittenstein’s new powerful actuator platform

Array ( [post_title] => Available from Micromech – Premo, Wittenstein’s new powerful actuator platform [post_content] =>

Absolute precision meets perfect movement: premo combines precision with motion  – as efficiently as never before

Available from Micromech – Premo, Wittenstein’s new powerful actuator platformThe central idea behind the first fully scalable servo-actuator platform from Wittenstein is an uncompromising flexibility from the viewpoint of the user. Motors and gearboxes with application related graduated performance characteristics can be configured modularly to individual motor/gearbox units. The result is a modular system that is significantly more versatile and more individual with regard to performance for the most diverse applications, that meets almost all the challenges of automation, integration and industry specification.

The core of the motor/gearbox unit is a torsionally rigid precision gearbox with low backlash and excellent torque density in conjunction with the equally powerful, permanently excited synchronous servo motor, which guarantees low cogging and a constant speed through the distributed winding.

The Premo actuator generation opens new dimensions in terms of performance with doubled power density and minimal installation space requirements. The Premo boasts increased productivity and optimised energy efficiency thanks to digital, single-cable technology providing more freedom during planning, design and storage as well as lower investment costs.

Typical fields of application:

–  Delta robot (axes 1-3, swivel axis)
–  Handling portal (Z axis, swivel/rotating)
–  Machine tool reaming
–  Tubular bag packaging
–  Folding carton packaging
–  Plastic thermoform (tool axis)
–  Intralogistics (AGV)

For more information on Wittenstein products contact Micromech sales on 01376 333333 or sales@micromech.co.uk

 

Disclaimer
The use of these images came with permission from Wittenstein.

[post_excerpt] => Absolute precision meets perfect movement: premo combines precision with motion  – as efficiently as never before The central idea behind the first fully scalable servo-actuator platform from Wittenstein is an uncompromising flexibility from the viewpoint of the user. Motors and gearboxes with application related graduated performance characteristics can be configured modularly to individual motor/gearbox units. […] [post_date_gmt] => 2019-07-16 09:33:50 [post_date] => 2019-07-16 09:33:50 [post_modified_gmt] => 2019-07-16 09:33:50 [post_modified] => 2019-07-16 09:33:50 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://micromech.wordpress.com/?p=1208 [meta] => Array ( [enclosure] => Array ( [0] => https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G [1] => ) [syndication_source] => Micromech Limited's space [syndication_source_uri] => https://micromech.wordpress.com [syndication_source_id] => http://micromech.wordpress.com/feed/ [rss:comments] => https://micromech.wordpress.com/2019/07/16/available-from-micromech-premo-wittensteins-new-powerful-actuator-platform/#respond [wfw:commentRSS] => https://micromech.wordpress.com/2019/07/16/available-from-micromech-premo-wittensteins-new-powerful-actuator-platform/feed/ [syndication_feed] => http://micromech.wordpress.com/feed/ [syndication_feed_id] => 72 [syndication_permalink] => https://micromech.wordpress.com/2019/07/16/available-from-micromech-premo-wittensteins-new-powerful-actuator-platform/ [syndication_item_hash] => 692416ce5e2f6530043460f006bb5ec7 [faf_featured_image] => 0 [faf_process_image] => 0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 27 [1] => 97 ) [post_tag] => Array ( [0] => 3352 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

Success Story from Kollmorgen – Peening extends life

Array ( [post_title] => Success Story from Kollmorgen – Peening extends life [post_content] =>

Kollmorgen - Success Story - Peening extends lifeFreymatic is building shot peening plants for the construction of aircraft engines – and, to do this, it’s opting for Motion Control by KOLLMORGEN to achieve high quality requirements

Kollmorgen - Success Story - Peening extends life

The shot needs to hit accurately. This is the only way for their power to be optimally deployed. This power does not do any damage. In fact, with each hit it makes the target stronger, more solid and tougher. And this is why accuracy, air speed and the right quantity with the right measurements are so crucial. Freymatic AG from Switzerland builds shot peening systems which extend the life of heavy-duty components including those in aircraft technology. To do this, the process, similar to a blacksmith’s hammer, produces precise compression stress on the surface. Motion Control by Kollmorgen ensures that sufficient shot reaches the target – the single cable connection technology saves valuable installation time.

“When we have a breakdown, we can’t just pull over.” Those in the know describe in one sentence the safety thinking in aviation. Anyone with a broken drive shaft managing to end up relatively unscathed with their vehicle in a field or ditch would have much further to fall if they were in a similar disaster while in the air. In the face of the serious consequences of technical faults in civil aviation, all parts of an aircraft are supplied with an abundance of safety margins. One way to make heavy-duty components even tougher against the prevailing powers is using shot peening. This process is used mainly in the construction of engines.

A chain mail made of tension forces

Using pressure, the drag is able to resist a potent force. Figuratively speaking, components are placed into chain mail. The links in the chain mail consist of compression stress which the shot peen with their kinetic energy during impact with the atomic lattice. Fatigue damages only become clear later on. “Fissures in the material occur where tensile stress is prevalent,” explains Martin Hunziker, CEO of Freymatic. The connection between tensile forces and the formation of fissures is particularly critical in the construction of aircraft since it is here that lightweight construction is required. Despite their size, the blades in an engine need to be very light. This is why they are made of a titanium alloy. The next generation of engines will be even lighter – amongst other things due to the use of titanium-based compounds. But in automotive construction, too, the process is an established manufacturing practice – specifically where fatigue resistance is required.

When it comes to shot peening, manufacturers often use Roxor systems by the Swiss firm Freymatic AG. To do this, the system builders from Domat-Ems in the canton of Graubünden place an industrial robot into a hermetically sealed chamber and fully automatically equip its wrist with up to six different spray nozzles via a mechanical exchange during the machining job. While the robot takes on the motion control along the components being blasted inside the soundproofed chamber, the pressure supply and dosage unit remain outside. The shot quantities can be selected anywhere between 1 and 10, thus achieving control deviations below three percent. This precision is necessary since it is not possible to carry out inline quality monitoring for shot peening – at least not without destroying the tool. The system operator must therefore be able to rely on the adherence to process parameters – which is why, in the field of servomotor driven dosage units, maximum precision and repeat accuracy is required. This range is achieved with a speed-controlled worm gear. The conveying screw is driven by synchronous servomotors from the KOLLMORGEN AKM series which in single cable connection technology are combined with their own AKD servo inverters.

The connection between the servo drive and the servo motor using just one cable is also an advantage for this application since the systems can be wired up more quickly while also saving space. This is because the cable typically used for feedback signals is not required.

Kollmorgen - Success Story - Peening extends life

KOLLMORGEN opts here for a slender hybrid cable for motor and feedback.

What is special about it: The single cable connection technology works even without laborious and expensive multiturn encoders. The specialists in Motion Control and servo drive technology have developed the digital resolver SFD3 for this. The interface translates the analog data of the resolver into one digital signal which it then transfers via one cable to the drives.

Tight tolerances in the dosage

Back to the peening system by Freymatic: In terms of construction, this consists of two pressure containers which act as a sluice between the unpressurized blasting shot store and the dosage which is under high pressure. The dosage powered by the AKM servomotors in the single-cable version represents a core function of the Roxor systems and, when operational, delivers shot quantities of between 0.1 and 12 kilograms per minute with an accuracy of /- 5 percent. In the mixing tube and up to the spray nozzle, the shot is accelerated up to the exit speed. This speed forms the two significant process parameters and is indirectly regulated via the spray pressure in a tight window of tolerance. The pressure thus lies between one and seven bar.

Accompanying the high adjustment range in the drive control designed by TBM Automation is above all the challenge of being both delicate and fast. To do this, the drive axles regulate the speed of the dosing screw via the signals from throughput sensors. “If there is too much material, the speed drops and vice versa,” explains Silvester Tribus, managing director of TBM Automation AG. The company from Widnau, south of Lake Constance, has been working closely with Freymatic for some time already as a system integrator. The specialists in Motion Control and servo drive technology belong to the group of certified system and distribution partners of KOLLMORGEN with highly specialized engineering competence.

Precision from zero speed

To ensure that the adjustment is carried out swiftly and precisely, Urs Tobler, from the TBM management team and specializing in control technology in blasting systems, has equipped the Motion Control with a few special features. “After all, we want the system to start up quickly and need a correspondingly short amount of time until the quantity and pressure have precisely engaged.” Urs Tobler looks back to make a comparison with a time when dosage drives were still driven by DC motors which were hard to regulate, especially with small quantities, and only delivered reliable values in the upper speed range. With an additional linearization of the control performance with analog values, using the KOLLMORGEN AKM motors, it has now been possible to “be precise even from zero speed upwards.” This control quality is said to make the process reliable across the entire adjustment range. This aspect is particularly relevant for shot peening since, after peening, it is not possible to carry out a quality analysis without damaging components.

Shot firing which is too low also results in poor values, following the motto “more is more”. To determine where the optimum value lies, system operators can only do this with “Almen strips”, thus measuring the effect of the shot impact by the distortion of a standardized surface. The Almen values determined by the distortion of a metal measurement strip then provide conclusions as to the effectiveness of the process. This must later precisely and continuously follow the previously determined key values so that the desired effects of the compression stress is set. In a further consequence, this process only functions in conjunction with regular calibration.

Conclusion

The complex processes in the mechanical strengthening of metal components using shot peening shows what a significant role the precise and, above all, repeat accurate servo drive technology plays. The automation conceived by TBM Automation AG for Freymatic AG is also set up in a user-friendly way for the operator and offers a cleanly structured visualization.

Author: Martin Zimmerman, Key Account Manager, KOLLMORGEN Switzerland

 

Disclaimer
The use of this news article and images came with permission from Kollmorgen.

[post_excerpt] => Freymatic is building shot peening plants for the construction of aircraft engines – and, to do this, it’s opting for Motion Control by KOLLMORGEN to achieve high quality requirements The shot needs to hit accurately. This is the only way for their power to be optimally deployed. This power does not do any damage. In […] [post_date_gmt] => 2019-07-10 10:27:44 [post_date] => 2019-07-10 10:27:44 [post_modified_gmt] => 2019-07-10 10:27:44 [post_modified] => 2019-07-10 10:27:44 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://micromech.wordpress.com/?p=1206 [meta] => Array ( [enclosure] => Array ( [0] => https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G [1] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening_3.jpg [2] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening.jpg [3] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening_1.jpg ) [syndication_source] => Micromech Limited's space [syndication_source_uri] => https://micromech.wordpress.com [syndication_source_id] => http://micromech.wordpress.com/feed/ [rss:comments] => https://micromech.wordpress.com/2019/07/10/success-story-from-kollmorgen-peening-extends-life/#respond [wfw:commentRSS] => https://micromech.wordpress.com/2019/07/10/success-story-from-kollmorgen-peening-extends-life/feed/ [syndication_feed] => http://micromech.wordpress.com/feed/ [syndication_feed_id] => 72 [syndication_permalink] => https://micromech.wordpress.com/2019/07/10/success-story-from-kollmorgen-peening-extends-life/ [syndication_item_hash] => a544cf8dfe1c0850f40f1ffae098542f ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 27 [1] => 97 ) [post_tag] => Array ( [0] => 3352 ) [post_format] => Array ( ) ) )

Doing filter:faf_image_filter

Execute image filter

Image process

Local save:https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening_3.jpg

Image process :: Saving local image

grab remote location : https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening_3.jpg

Image exists, checking for same file size

Replacing images : Kollmorgen - Success Story - Peening extends life - Kollmorgen - Success Story - Peening extends life ON

Kollmorgen - Success Story - Peening extends lifeFreymatic is building shot peening plants for the construction of aircraft engines – and, to do this, it’s opting for Motion Control by KOLLMORGEN to achieve high quality requirements

Kollmorgen - Success Story - Peening extends life

The shot needs to hit accurately. This is the only way for their power to be optimally deployed. This power does not do any damage. In fact, with each hit it makes the target stronger, more solid and tougher. And this is why accuracy, air speed and the right quantity with the right measurements are so crucial. Freymatic AG from Switzerland builds shot peening systems which extend the life of heavy-duty components including those in aircraft technology. To do this, the process, similar to a blacksmith’s hammer, produces precise compression stress on the surface. Motion Control by Kollmorgen ensures that sufficient shot reaches the target – the single cable connection technology saves valuable installation time.

“When we have a breakdown, we can’t just pull over.” Those in the know describe in one sentence the safety thinking in aviation. Anyone with a broken drive shaft managing to end up relatively unscathed with their vehicle in a field or ditch would have much further to fall if they were in a similar disaster while in the air. In the face of the serious consequences of technical faults in civil aviation, all parts of an aircraft are supplied with an abundance of safety margins. One way to make heavy-duty components even tougher against the prevailing powers is using shot peening. This process is used mainly in the construction of engines.

A chain mail made of tension forces

Using pressure, the drag is able to resist a potent force. Figuratively speaking, components are placed into chain mail. The links in the chain mail consist of compression stress which the shot peen with their kinetic energy during impact with the atomic lattice. Fatigue damages only become clear later on. “Fissures in the material occur where tensile stress is prevalent,” explains Martin Hunziker, CEO of Freymatic. The connection between tensile forces and the formation of fissures is particularly critical in the construction of aircraft since it is here that lightweight construction is required. Despite their size, the blades in an engine need to be very light. This is why they are made of a titanium alloy. The next generation of engines will be even lighter – amongst other things due to the use of titanium-based compounds. But in automotive construction, too, the process is an established manufacturing practice – specifically where fatigue resistance is required.

When it comes to shot peening, manufacturers often use Roxor systems by the Swiss firm Freymatic AG. To do this, the system builders from Domat-Ems in the canton of Graubünden place an industrial robot into a hermetically sealed chamber and fully automatically equip its wrist with up to six different spray nozzles via a mechanical exchange during the machining job. While the robot takes on the motion control along the components being blasted inside the soundproofed chamber, the pressure supply and dosage unit remain outside. The shot quantities can be selected anywhere between 1 and 10, thus achieving control deviations below three percent. This precision is necessary since it is not possible to carry out inline quality monitoring for shot peening – at least not without destroying the tool. The system operator must therefore be able to rely on the adherence to process parameters – which is why, in the field of servomotor driven dosage units, maximum precision and repeat accuracy is required. This range is achieved with a speed-controlled worm gear. The conveying screw is driven by synchronous servomotors from the KOLLMORGEN AKM series which in single cable connection technology are combined with their own AKD servo inverters.

The connection between the servo drive and the servo motor using just one cable is also an advantage for this application since the systems can be wired up more quickly while also saving space. This is because the cable typically used for feedback signals is not required.

Kollmorgen - Success Story - Peening extends life

KOLLMORGEN opts here for a slender hybrid cable for motor and feedback.

What is special about it: The single cable connection technology works even without laborious and expensive multiturn encoders. The specialists in Motion Control and servo drive technology have developed the digital resolver SFD3 for this. The interface translates the analog data of the resolver into one digital signal which it then transfers via one cable to the drives.

Tight tolerances in the dosage

Back to the peening system by Freymatic: In terms of construction, this consists of two pressure containers which act as a sluice between the unpressurized blasting shot store and the dosage which is under high pressure. The dosage powered by the AKM servomotors in the single-cable version represents a core function of the Roxor systems and, when operational, delivers shot quantities of between 0.1 and 12 kilograms per minute with an accuracy of /- 5 percent. In the mixing tube and up to the spray nozzle, the shot is accelerated up to the exit speed. This speed forms the two significant process parameters and is indirectly regulated via the spray pressure in a tight window of tolerance. The pressure thus lies between one and seven bar.

Accompanying the high adjustment range in the drive control designed by TBM Automation is above all the challenge of being both delicate and fast. To do this, the drive axles regulate the speed of the dosing screw via the signals from throughput sensors. “If there is too much material, the speed drops and vice versa,” explains Silvester Tribus, managing director of TBM Automation AG. The company from Widnau, south of Lake Constance, has been working closely with Freymatic for some time already as a system integrator. The specialists in Motion Control and servo drive technology belong to the group of certified system and distribution partners of KOLLMORGEN with highly specialized engineering competence.

Precision from zero speed

To ensure that the adjustment is carried out swiftly and precisely, Urs Tobler, from the TBM management team and specializing in control technology in blasting systems, has equipped the Motion Control with a few special features. “After all, we want the system to start up quickly and need a correspondingly short amount of time until the quantity and pressure have precisely engaged.” Urs Tobler looks back to make a comparison with a time when dosage drives were still driven by DC motors which were hard to regulate, especially with small quantities, and only delivered reliable values in the upper speed range. With an additional linearization of the control performance with analog values, using the KOLLMORGEN AKM motors, it has now been possible to “be precise even from zero speed upwards.” This control quality is said to make the process reliable across the entire adjustment range. This aspect is particularly relevant for shot peening since, after peening, it is not possible to carry out a quality analysis without damaging components.

Shot firing which is too low also results in poor values, following the motto “more is more”. To determine where the optimum value lies, system operators can only do this with “Almen strips”, thus measuring the effect of the shot impact by the distortion of a standardized surface. The Almen values determined by the distortion of a metal measurement strip then provide conclusions as to the effectiveness of the process. This must later precisely and continuously follow the previously determined key values so that the desired effects of the compression stress is set. In a further consequence, this process only functions in conjunction with regular calibration.

Conclusion

The complex processes in the mechanical strengthening of metal components using shot peening shows what a significant role the precise and, above all, repeat accurate servo drive technology plays. The automation conceived by TBM Automation AG for Freymatic AG is also set up in a user-friendly way for the operator and offers a cleanly structured visualization.

Author: Martin Zimmerman, Key Account Manager, KOLLMORGEN Switzerland

 

Disclaimer
The use of this news article and images came with permission from Kollmorgen.

Local save:https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening.jpg

Image process :: Saving local image

grab remote location : https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening.jpg

Image exists, checking for same file size

Replacing images : Kollmorgen - Success Story - Peening extends life - Kollmorgen - Success Story - Peening extends life ON

Success Story from Kollmorgen – Peening extends lifeFreymatic is building shot peening plants for the construction of aircraft engines – and, to do this, it’s opting for Motion Control by KOLLMORGEN to achieve high quality requirements

Kollmorgen - Success Story - Peening extends life

The shot needs to hit accurately. This is the only way for their power to be optimally deployed. This power does not do any damage. In fact, with each hit it makes the target stronger, more solid and tougher. And this is why accuracy, air speed and the right quantity with the right measurements are so crucial. Freymatic AG from Switzerland builds shot peening systems which extend the life of heavy-duty components including those in aircraft technology. To do this, the process, similar to a blacksmith’s hammer, produces precise compression stress on the surface. Motion Control by Kollmorgen ensures that sufficient shot reaches the target – the single cable connection technology saves valuable installation time.

“When we have a breakdown, we can’t just pull over.” Those in the know describe in one sentence the safety thinking in aviation. Anyone with a broken drive shaft managing to end up relatively unscathed with their vehicle in a field or ditch would have much further to fall if they were in a similar disaster while in the air. In the face of the serious consequences of technical faults in civil aviation, all parts of an aircraft are supplied with an abundance of safety margins. One way to make heavy-duty components even tougher against the prevailing powers is using shot peening. This process is used mainly in the construction of engines.

A chain mail made of tension forces

Using pressure, the drag is able to resist a potent force. Figuratively speaking, components are placed into chain mail. The links in the chain mail consist of compression stress which the shot peen with their kinetic energy during impact with the atomic lattice. Fatigue damages only become clear later on. “Fissures in the material occur where tensile stress is prevalent,” explains Martin Hunziker, CEO of Freymatic. The connection between tensile forces and the formation of fissures is particularly critical in the construction of aircraft since it is here that lightweight construction is required. Despite their size, the blades in an engine need to be very light. This is why they are made of a titanium alloy. The next generation of engines will be even lighter – amongst other things due to the use of titanium-based compounds. But in automotive construction, too, the process is an established manufacturing practice – specifically where fatigue resistance is required.

When it comes to shot peening, manufacturers often use Roxor systems by the Swiss firm Freymatic AG. To do this, the system builders from Domat-Ems in the canton of Graubünden place an industrial robot into a hermetically sealed chamber and fully automatically equip its wrist with up to six different spray nozzles via a mechanical exchange during the machining job. While the robot takes on the motion control along the components being blasted inside the soundproofed chamber, the pressure supply and dosage unit remain outside. The shot quantities can be selected anywhere between 1 and 10, thus achieving control deviations below three percent. This precision is necessary since it is not possible to carry out inline quality monitoring for shot peening – at least not without destroying the tool. The system operator must therefore be able to rely on the adherence to process parameters – which is why, in the field of servomotor driven dosage units, maximum precision and repeat accuracy is required. This range is achieved with a speed-controlled worm gear. The conveying screw is driven by synchronous servomotors from the KOLLMORGEN AKM series which in single cable connection technology are combined with their own AKD servo inverters.

The connection between the servo drive and the servo motor using just one cable is also an advantage for this application since the systems can be wired up more quickly while also saving space. This is because the cable typically used for feedback signals is not required.

Kollmorgen - Success Story - Peening extends life

KOLLMORGEN opts here for a slender hybrid cable for motor and feedback.

What is special about it: The single cable connection technology works even without laborious and expensive multiturn encoders. The specialists in Motion Control and servo drive technology have developed the digital resolver SFD3 for this. The interface translates the analog data of the resolver into one digital signal which it then transfers via one cable to the drives.

Tight tolerances in the dosage

Back to the peening system by Freymatic: In terms of construction, this consists of two pressure containers which act as a sluice between the unpressurized blasting shot store and the dosage which is under high pressure. The dosage powered by the AKM servomotors in the single-cable version represents a core function of the Roxor systems and, when operational, delivers shot quantities of between 0.1 and 12 kilograms per minute with an accuracy of /- 5 percent. In the mixing tube and up to the spray nozzle, the shot is accelerated up to the exit speed. This speed forms the two significant process parameters and is indirectly regulated via the spray pressure in a tight window of tolerance. The pressure thus lies between one and seven bar.

Accompanying the high adjustment range in the drive control designed by TBM Automation is above all the challenge of being both delicate and fast. To do this, the drive axles regulate the speed of the dosing screw via the signals from throughput sensors. “If there is too much material, the speed drops and vice versa,” explains Silvester Tribus, managing director of TBM Automation AG. The company from Widnau, south of Lake Constance, has been working closely with Freymatic for some time already as a system integrator. The specialists in Motion Control and servo drive technology belong to the group of certified system and distribution partners of KOLLMORGEN with highly specialized engineering competence.

Precision from zero speed

To ensure that the adjustment is carried out swiftly and precisely, Urs Tobler, from the TBM management team and specializing in control technology in blasting systems, has equipped the Motion Control with a few special features. “After all, we want the system to start up quickly and need a correspondingly short amount of time until the quantity and pressure have precisely engaged.” Urs Tobler looks back to make a comparison with a time when dosage drives were still driven by DC motors which were hard to regulate, especially with small quantities, and only delivered reliable values in the upper speed range. With an additional linearization of the control performance with analog values, using the KOLLMORGEN AKM motors, it has now been possible to “be precise even from zero speed upwards.” This control quality is said to make the process reliable across the entire adjustment range. This aspect is particularly relevant for shot peening since, after peening, it is not possible to carry out a quality analysis without damaging components.

Shot firing which is too low also results in poor values, following the motto “more is more”. To determine where the optimum value lies, system operators can only do this with “Almen strips”, thus measuring the effect of the shot impact by the distortion of a standardized surface. The Almen values determined by the distortion of a metal measurement strip then provide conclusions as to the effectiveness of the process. This must later precisely and continuously follow the previously determined key values so that the desired effects of the compression stress is set. In a further consequence, this process only functions in conjunction with regular calibration.

Conclusion

The complex processes in the mechanical strengthening of metal components using shot peening shows what a significant role the precise and, above all, repeat accurate servo drive technology plays. The automation conceived by TBM Automation AG for Freymatic AG is also set up in a user-friendly way for the operator and offers a cleanly structured visualization.

Author: Martin Zimmerman, Key Account Manager, KOLLMORGEN Switzerland

 

Disclaimer
The use of this news article and images came with permission from Kollmorgen.

Local save:https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening_1.jpg

Image process :: Saving local image

grab remote location : https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening_1.jpg

Image exists, checking for same file size

Replacing images : Kollmorgen - Success Story - Peening extends life - Kollmorgen - Success Story - Peening extends life ON

Success Story from Kollmorgen – Peening extends lifeFreymatic is building shot peening plants for the construction of aircraft engines – and, to do this, it’s opting for Motion Control by KOLLMORGEN to achieve high quality requirements

Success Story from Kollmorgen – Peening extends life

The shot needs to hit accurately. This is the only way for their power to be optimally deployed. This power does not do any damage. In fact, with each hit it makes the target stronger, more solid and tougher. And this is why accuracy, air speed and the right quantity with the right measurements are so crucial. Freymatic AG from Switzerland builds shot peening systems which extend the life of heavy-duty components including those in aircraft technology. To do this, the process, similar to a blacksmith’s hammer, produces precise compression stress on the surface. Motion Control by Kollmorgen ensures that sufficient shot reaches the target – the single cable connection technology saves valuable installation time.

“When we have a breakdown, we can’t just pull over.” Those in the know describe in one sentence the safety thinking in aviation. Anyone with a broken drive shaft managing to end up relatively unscathed with their vehicle in a field or ditch would have much further to fall if they were in a similar disaster while in the air. In the face of the serious consequences of technical faults in civil aviation, all parts of an aircraft are supplied with an abundance of safety margins. One way to make heavy-duty components even tougher against the prevailing powers is using shot peening. This process is used mainly in the construction of engines.

A chain mail made of tension forces

Using pressure, the drag is able to resist a potent force. Figuratively speaking, components are placed into chain mail. The links in the chain mail consist of compression stress which the shot peen with their kinetic energy during impact with the atomic lattice. Fatigue damages only become clear later on. “Fissures in the material occur where tensile stress is prevalent,” explains Martin Hunziker, CEO of Freymatic. The connection between tensile forces and the formation of fissures is particularly critical in the construction of aircraft since it is here that lightweight construction is required. Despite their size, the blades in an engine need to be very light. This is why they are made of a titanium alloy. The next generation of engines will be even lighter – amongst other things due to the use of titanium-based compounds. But in automotive construction, too, the process is an established manufacturing practice – specifically where fatigue resistance is required.

When it comes to shot peening, manufacturers often use Roxor systems by the Swiss firm Freymatic AG. To do this, the system builders from Domat-Ems in the canton of Graubünden place an industrial robot into a hermetically sealed chamber and fully automatically equip its wrist with up to six different spray nozzles via a mechanical exchange during the machining job. While the robot takes on the motion control along the components being blasted inside the soundproofed chamber, the pressure supply and dosage unit remain outside. The shot quantities can be selected anywhere between 1 and 10, thus achieving control deviations below three percent. This precision is necessary since it is not possible to carry out inline quality monitoring for shot peening – at least not without destroying the tool. The system operator must therefore be able to rely on the adherence to process parameters – which is why, in the field of servomotor driven dosage units, maximum precision and repeat accuracy is required. This range is achieved with a speed-controlled worm gear. The conveying screw is driven by synchronous servomotors from the KOLLMORGEN AKM series which in single cable connection technology are combined with their own AKD servo inverters.

The connection between the servo drive and the servo motor using just one cable is also an advantage for this application since the systems can be wired up more quickly while also saving space. This is because the cable typically used for feedback signals is not required.

Kollmorgen - Success Story - Peening extends life

KOLLMORGEN opts here for a slender hybrid cable for motor and feedback.

What is special about it: The single cable connection technology works even without laborious and expensive multiturn encoders. The specialists in Motion Control and servo drive technology have developed the digital resolver SFD3 for this. The interface translates the analog data of the resolver into one digital signal which it then transfers via one cable to the drives.

Tight tolerances in the dosage

Back to the peening system by Freymatic: In terms of construction, this consists of two pressure containers which act as a sluice between the unpressurized blasting shot store and the dosage which is under high pressure. The dosage powered by the AKM servomotors in the single-cable version represents a core function of the Roxor systems and, when operational, delivers shot quantities of between 0.1 and 12 kilograms per minute with an accuracy of /- 5 percent. In the mixing tube and up to the spray nozzle, the shot is accelerated up to the exit speed. This speed forms the two significant process parameters and is indirectly regulated via the spray pressure in a tight window of tolerance. The pressure thus lies between one and seven bar.

Accompanying the high adjustment range in the drive control designed by TBM Automation is above all the challenge of being both delicate and fast. To do this, the drive axles regulate the speed of the dosing screw via the signals from throughput sensors. “If there is too much material, the speed drops and vice versa,” explains Silvester Tribus, managing director of TBM Automation AG. The company from Widnau, south of Lake Constance, has been working closely with Freymatic for some time already as a system integrator. The specialists in Motion Control and servo drive technology belong to the group of certified system and distribution partners of KOLLMORGEN with highly specialized engineering competence.

Precision from zero speed

To ensure that the adjustment is carried out swiftly and precisely, Urs Tobler, from the TBM management team and specializing in control technology in blasting systems, has equipped the Motion Control with a few special features. “After all, we want the system to start up quickly and need a correspondingly short amount of time until the quantity and pressure have precisely engaged.” Urs Tobler looks back to make a comparison with a time when dosage drives were still driven by DC motors which were hard to regulate, especially with small quantities, and only delivered reliable values in the upper speed range. With an additional linearization of the control performance with analog values, using the KOLLMORGEN AKM motors, it has now been possible to “be precise even from zero speed upwards.” This control quality is said to make the process reliable across the entire adjustment range. This aspect is particularly relevant for shot peening since, after peening, it is not possible to carry out a quality analysis without damaging components.

Shot firing which is too low also results in poor values, following the motto “more is more”. To determine where the optimum value lies, system operators can only do this with “Almen strips”, thus measuring the effect of the shot impact by the distortion of a standardized surface. The Almen values determined by the distortion of a metal measurement strip then provide conclusions as to the effectiveness of the process. This must later precisely and continuously follow the previously determined key values so that the desired effects of the compression stress is set. In a further consequence, this process only functions in conjunction with regular calibration.

Conclusion

The complex processes in the mechanical strengthening of metal components using shot peening shows what a significant role the precise and, above all, repeat accurate servo drive technology plays. The automation conceived by TBM Automation AG for Freymatic AG is also set up in a user-friendly way for the operator and offers a cleanly structured visualization.

Author: Martin Zimmerman, Key Account Manager, KOLLMORGEN Switzerland

 

Disclaimer
The use of this news article and images came with permission from Kollmorgen.

Array ( [enclosure] => Array ( [0] => https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G [1] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening_3.jpg [2] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening.jpg [3] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening_1.jpg ) [syndication_source] => Micromech Limited's space [syndication_source_uri] => https://micromech.wordpress.com [syndication_source_id] => http://micromech.wordpress.com/feed/ [rss:comments] => https://micromech.wordpress.com/2019/07/10/success-story-from-kollmorgen-peening-extends-life/#respond [wfw:commentRSS] => https://micromech.wordpress.com/2019/07/10/success-story-from-kollmorgen-peening-extends-life/feed/ [syndication_feed] => http://micromech.wordpress.com/feed/ [syndication_feed_id] => 72 [syndication_permalink] => https://micromech.wordpress.com/2019/07/10/success-story-from-kollmorgen-peening-extends-life/ [syndication_item_hash] => a544cf8dfe1c0850f40f1ffae098542f )

Execute : Enclosure images

Enclosure save:

Array ( [0] => https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G [1] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening_3.jpg [2] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening.jpg [3] => https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening_1.jpg )

No match on https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G

grab remote location : https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening_3.jpg

Image exists, checking for same file size

New Enclosure:

grab remote location : https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening.jpg

Image exists, checking for same file size

New Enclosure:

grab remote location : https://www.micromech.co.uk/uploads/assets/news_2019/koll_success_story_peening_1.jpg

Image exists, checking for same file size

New Enclosure:

Decide filter: Returning post, everything seems orderly :Success Story from Kollmorgen – Peening extends life

Array ( [post_title] => Success Story from Kollmorgen – Peening extends life [post_content] =>

Success Story from Kollmorgen – Peening extends lifeFreymatic is building shot peening plants for the construction of aircraft engines – and, to do this, it’s opting for Motion Control by KOLLMORGEN to achieve high quality requirements

Success Story from Kollmorgen – Peening extends life

The shot needs to hit accurately. This is the only way for their power to be optimally deployed. This power does not do any damage. In fact, with each hit it makes the target stronger, more solid and tougher. And this is why accuracy, air speed and the right quantity with the right measurements are so crucial. Freymatic AG from Switzerland builds shot peening systems which extend the life of heavy-duty components including those in aircraft technology. To do this, the process, similar to a blacksmith’s hammer, produces precise compression stress on the surface. Motion Control by Kollmorgen ensures that sufficient shot reaches the target – the single cable connection technology saves valuable installation time.

“When we have a breakdown, we can’t just pull over.” Those in the know describe in one sentence the safety thinking in aviation. Anyone with a broken drive shaft managing to end up relatively unscathed with their vehicle in a field or ditch would have much further to fall if they were in a similar disaster while in the air. In the face of the serious consequences of technical faults in civil aviation, all parts of an aircraft are supplied with an abundance of safety margins. One way to make heavy-duty components even tougher against the prevailing powers is using shot peening. This process is used mainly in the construction of engines.

A chain mail made of tension forces

Using pressure, the drag is able to resist a potent force. Figuratively speaking, components are placed into chain mail. The links in the chain mail consist of compression stress which the shot peen with their kinetic energy during impact with the atomic lattice. Fatigue damages only become clear later on. “Fissures in the material occur where tensile stress is prevalent,” explains Martin Hunziker, CEO of Freymatic. The connection between tensile forces and the formation of fissures is particularly critical in the construction of aircraft since it is here that lightweight construction is required. Despite their size, the blades in an engine need to be very light. This is why they are made of a titanium alloy. The next generation of engines will be even lighter – amongst other things due to the use of titanium-based compounds. But in automotive construction, too, the process is an established manufacturing practice – specifically where fatigue resistance is required.

When it comes to shot peening, manufacturers often use Roxor systems by the Swiss firm Freymatic AG. To do this, the system builders from Domat-Ems in the canton of Graubünden place an industrial robot into a hermetically sealed chamber and fully automatically equip its wrist with up to six different spray nozzles via a mechanical exchange during the machining job. While the robot takes on the motion control along the components being blasted inside the soundproofed chamber, the pressure supply and dosage unit remain outside. The shot quantities can be selected anywhere between 1 and 10, thus achieving control deviations below three percent. This precision is necessary since it is not possible to carry out inline quality monitoring for shot peening – at least not without destroying the tool. The system operator must therefore be able to rely on the adherence to process parameters – which is why, in the field of servomotor driven dosage units, maximum precision and repeat accuracy is required. This range is achieved with a speed-controlled worm gear. The conveying screw is driven by synchronous servomotors from the KOLLMORGEN AKM series which in single cable connection technology are combined with their own AKD servo inverters.

The connection between the servo drive and the servo motor using just one cable is also an advantage for this application since the systems can be wired up more quickly while also saving space. This is because the cable typically used for feedback signals is not required.

Success Story from Kollmorgen – Peening extends life

KOLLMORGEN opts here for a slender hybrid cable for motor and feedback.

What is special about it: The single cable connection technology works even without laborious and expensive multiturn encoders. The specialists in Motion Control and servo drive technology have developed the digital resolver SFD3 for this. The interface translates the analog data of the resolver into one digital signal which it then transfers via one cable to the drives.

Tight tolerances in the dosage

Back to the peening system by Freymatic: In terms of construction, this consists of two pressure containers which act as a sluice between the unpressurized blasting shot store and the dosage which is under high pressure. The dosage powered by the AKM servomotors in the single-cable version represents a core function of the Roxor systems and, when operational, delivers shot quantities of between 0.1 and 12 kilograms per minute with an accuracy of /- 5 percent. In the mixing tube and up to the spray nozzle, the shot is accelerated up to the exit speed. This speed forms the two significant process parameters and is indirectly regulated via the spray pressure in a tight window of tolerance. The pressure thus lies between one and seven bar.

Accompanying the high adjustment range in the drive control designed by TBM Automation is above all the challenge of being both delicate and fast. To do this, the drive axles regulate the speed of the dosing screw via the signals from throughput sensors. “If there is too much material, the speed drops and vice versa,” explains Silvester Tribus, managing director of TBM Automation AG. The company from Widnau, south of Lake Constance, has been working closely with Freymatic for some time already as a system integrator. The specialists in Motion Control and servo drive technology belong to the group of certified system and distribution partners of KOLLMORGEN with highly specialized engineering competence.

Precision from zero speed

To ensure that the adjustment is carried out swiftly and precisely, Urs Tobler, from the TBM management team and specializing in control technology in blasting systems, has equipped the Motion Control with a few special features. “After all, we want the system to start up quickly and need a correspondingly short amount of time until the quantity and pressure have precisely engaged.” Urs Tobler looks back to make a comparison with a time when dosage drives were still driven by DC motors which were hard to regulate, especially with small quantities, and only delivered reliable values in the upper speed range. With an additional linearization of the control performance with analog values, using the KOLLMORGEN AKM motors, it has now been possible to “be precise even from zero speed upwards.” This control quality is said to make the process reliable across the entire adjustment range. This aspect is particularly relevant for shot peening since, after peening, it is not possible to carry out a quality analysis without damaging components.

Shot firing which is too low also results in poor values, following the motto “more is more”. To determine where the optimum value lies, system operators can only do this with “Almen strips”, thus measuring the effect of the shot impact by the distortion of a standardized surface. The Almen values determined by the distortion of a metal measurement strip then provide conclusions as to the effectiveness of the process. This must later precisely and continuously follow the previously determined key values so that the desired effects of the compression stress is set. In a further consequence, this process only functions in conjunction with regular calibration.

Conclusion

The complex processes in the mechanical strengthening of metal components using shot peening shows what a significant role the precise and, above all, repeat accurate servo drive technology plays. The automation conceived by TBM Automation AG for Freymatic AG is also set up in a user-friendly way for the operator and offers a cleanly structured visualization.

Author: Martin Zimmerman, Key Account Manager, KOLLMORGEN Switzerland

 

Disclaimer
The use of this news article and images came with permission from Kollmorgen.

[post_excerpt] => Freymatic is building shot peening plants for the construction of aircraft engines – and, to do this, it’s opting for Motion Control by KOLLMORGEN to achieve high quality requirements The shot needs to hit accurately. This is the only way for their power to be optimally deployed. This power does not do any damage. In […] [post_date_gmt] => 2019-07-10 10:27:44 [post_date] => 2019-07-10 10:27:44 [post_modified_gmt] => 2019-07-10 10:27:44 [post_modified] => 2019-07-10 10:27:44 [post_status] => publish [comment_status] => closed [ping_status] => closed [guid] => http://micromech.wordpress.com/?p=1206 [meta] => Array ( [enclosure] => Array ( [0] => https://1.gravatar.com/avatar/a97b3881d9c18621af6022d112efa731?s=96&d=identicon&r=G [1] => [2] => [3] => ) [syndication_source] => Micromech Limited's space [syndication_source_uri] => https://micromech.wordpress.com [syndication_source_id] => http://micromech.wordpress.com/feed/ [rss:comments] => https://micromech.wordpress.com/2019/07/10/success-story-from-kollmorgen-peening-extends-life/#respond [wfw:commentRSS] => https://micromech.wordpress.com/2019/07/10/success-story-from-kollmorgen-peening-extends-life/feed/ [syndication_feed] => http://micromech.wordpress.com/feed/ [syndication_feed_id] => 72 [syndication_permalink] => https://micromech.wordpress.com/2019/07/10/success-story-from-kollmorgen-peening-extends-life/ [syndication_item_hash] => a544cf8dfe1c0850f40f1ffae098542f [faf_featured_image] => 0 [faf_process_image] => 0,0,0 ) [post_type] => post [post_author] => 1 [tax_input] => Array ( [category] => Array ( [0] => 27 [1] => 97 ) [post_tag] => Array ( [0] => 3352 ) [post_format] => Array ( ) ) )

FAF deciding on filters on post to be syndicated:

RTA’s CSD range of high quality, cost effective stepper drives with EtherC